From mboxrd@z Thu Jan 1 00:00:00 1970 From: khilman@kernel.org (Kevin Hilman) Date: Thu, 22 Jan 2015 13:54:28 -0800 Subject: [PATCH v3] ARM: dts: exynos5422-odroidxu3: add on-board INA231 sensors Message-ID: <1421963668-28359-1-git-send-email-khilman@kernel.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Kevin Hilman The odroid-xu3 has 4 INA231 current sensors on board which can be accessed from the Linux via the hwmon interface. There is one sensor for each of these power rails: - A15 cluster: VDD_ARM - A7 cluster: VDD_KFC - GPU: VDD_G3D - memory: VDD_MEM In addition to adding the sensors, LDO26 from the PMIC needs to be enabled because it's powering these sensor. Cc: Javier Martinez Canillas Cc: Sjoerd Simons Reviewed-By: Sjoerd Simons Signed-off-by: Kevin Hilman --- v3: extend existing i2c_0 node v2: use "ti,ina231" as compatible string. Applies on top of "ARM: dts: Add dts file for odroid XU3 board" from Sjoerd Simons. arch/arm/boot/dts/exynos5422-odroidxu3.dts | 39 ++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+) diff --git a/arch/arm/boot/dts/exynos5422-odroidxu3.dts b/arch/arm/boot/dts/exynos5422-odroidxu3.dts index c29123c0734d..38694a4a5417 100644 --- a/arch/arm/boot/dts/exynos5422-odroidxu3.dts +++ b/arch/arm/boot/dts/exynos5422-odroidxu3.dts @@ -174,6 +174,13 @@ regulator-always-on; }; + ldo26_reg: LDO26 { + regulator-name = "vdd_ldo26"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-always-on; + }; + buck1_reg: BUCK1 { regulator-name = "vdd_mif"; regulator-min-microvolt = <800000>; @@ -330,3 +337,35 @@ &usbdrd_dwc3_1 { dr_mode = "otg"; }; + +&i2c_0 { + status = "okay"; + + /* A15 cluster: VDD_ARM */ + ina231 at 40 { + compatible = "ti,ina231"; + reg = <0x40>; + shunt-resistor = <10000>; + }; + + /* memory: VDD_MEM */ + ina231 at 41 { + compatible = "ti,ina231"; + reg = <0x41>; + shunt-resistor = <10000>; + }; + + /* GPU: VDD_G3D */ + ina231 at 44 { + compatible = "ti,ina231"; + reg = <0x44>; + shunt-resistor = <10000>; + }; + + /* A7 cluster: VDD_KFC */ + ina231 at 45 { + compatible = "ti,ina231"; + reg = <0x45>; + shunt-resistor = <10000>; + }; +}; -- 2.1.3