From mboxrd@z Thu Jan 1 00:00:00 1970 From: pebolle@tiscali.nl (Paul Bolle) Date: Thu, 29 Jan 2015 14:37:36 +0100 Subject: [PATCH 6/9] clocksource: Driver for Conexant Digicolor SoC timer In-Reply-To: <1422536899-16609-6-git-send-email-daniel.lezcano@linaro.org> References: <54CA3044.6070501@linaro.org> <1422536899-16609-1-git-send-email-daniel.lezcano@linaro.org> <1422536899-16609-6-git-send-email-daniel.lezcano@linaro.org> Message-ID: <1422538656.32520.4.camel@x220> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Thu, 2015-01-29 at 14:08 +0100, Daniel Lezcano wrote: > From: Baruch Siach > > Add clocksource driver to the Conexant CX92755 SoC, part of the Digicolor SoCs > series. Hardware provides 8 timers, A to H. Timer A is dedicated to a future > watchdog driver so we don't use it here. Use timer B for sched_clock, and timer > C for clock_event. > > Signed-off-by: Baruch Siach > Signed-off-by: Daniel Lezcano > --- > drivers/clocksource/Kconfig | 3 + > drivers/clocksource/Makefile | 1 + > drivers/clocksource/timer-digicolor.c | 199 ++++++++++++++++++++++++++++++++++ > 3 files changed, 203 insertions(+) > create mode 100644 drivers/clocksource/timer-digicolor.c > > diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig > index a89120b..72a3827 100644 > --- a/drivers/clocksource/Kconfig > +++ b/drivers/clocksource/Kconfig > @@ -18,6 +18,9 @@ config CLKBLD_I8253 > config CLKSRC_MMIO > bool > > +config DIGICOLOR_TIMER > + bool > + And the select for this symbol (see https://lkml.org/lkml/2015/1/26/360) will be provided in a separate patch? Because this patch, by itself, won't allow DIGICOLOR_TIMER to be set, will it? > config DW_APB_TIMER > bool > Paul Bolle