From: s.hauer@pengutronix.de (Sascha Hauer)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 12/13] mfd: dt-bindings: Add bindings for the MediaTek MT6397 PMIC
Date: Mon, 9 Feb 2015 11:47:24 +0100 [thread overview]
Message-ID: <1423478845-2835-13-git-send-email-s.hauer@pengutronix.de> (raw)
In-Reply-To: <1423478845-2835-1-git-send-email-s.hauer@pengutronix.de>
Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
---
Documentation/devicetree/bindings/mfd/mt6397.txt | 70 ++++++++++++++++++++++++
1 file changed, 70 insertions(+)
create mode 100644 Documentation/devicetree/bindings/mfd/mt6397.txt
diff --git a/Documentation/devicetree/bindings/mfd/mt6397.txt b/Documentation/devicetree/bindings/mfd/mt6397.txt
new file mode 100644
index 0000000..15043e6
--- /dev/null
+++ b/Documentation/devicetree/bindings/mfd/mt6397.txt
@@ -0,0 +1,70 @@
+MediaTek MT6397 Multifunction Device Driver
+
+MT6397 is a multifunction device with the following sub modules:
+- Regulator
+- RTC
+- Audio codec
+- GPIO
+- Clock
+
+It is interfaced to host controller using SPI interface by a proprietary hardware
+called PMIC wrapper or pwrap. MT6397 MFD is a child device of pwrap.
+See the following for pwarp node definitions:
+Documentation/devicetree/bindings/soc/pwrap.txt
+
+This document describes the binding for MFD device and its sub module.
+
+Required properties:
+compatible: "mediatek,mt6397"
+
+Optional subnodes:
+
+- rtc
+ Required properties:
+ - compatible: "mediatek,mt6397-rtc"
+- regulators
+ Required properties:
+ - compatible: "mediatek,mt6397-regulator"
+ see Documentation/devicetree/bindings/regulator/mt6397-regulator.txt
+- codec
+ Required properties:
+ - compatible: "mediatek,mt6397-codec"
+- clk
+ Required properties:
+ - compatible: "mediatek,mt6397-clk"
+
+Example:
+ pwrap: pwrap at 1000f000 {
+ compatible = "mediatek,mt8135-pwrap";
+
+ ...
+
+ pmic {
+ compatible = "mediatek,mt6397";
+
+ codec: mt6397codec {
+ compatible = "mediatek,mt6397-codec";
+ };
+
+ regulators {
+ compatible = "mediatek,mt6397-regulator";
+
+ mt6397_vpca15_reg: buck_vpca15 {
+ regulator-compatible = "buck_vpca15";
+ regulator-name = "vpca15";
+ regulator-min-microvolt = <850000>;
+ regulator-max-microvolt = <1400000>;
+ regulator-ramp-delay = <12500>;
+ regulator-always-on;
+ };
+
+ mt6397_vgp4_reg: ldo_vgp4 {
+ regulator-compatible = "ldo_vgp4";
+ regulator-name = "vgp4";
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <3300000>;
+ regulator-enable-ramp-delay = <218>;
+ };
+ };
+ };
+ };
--
2.1.4
next prev parent reply other threads:[~2015-02-09 10:47 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-09 10:47 [PATCH v5]: clk: Add common clock support for Mediatek MT8135 and MT8173 Sascha Hauer
2015-02-09 10:47 ` [PATCH 01/13] clk: dts: mediatek: add Mediatek MT8135 clock bindings Sascha Hauer
2015-02-09 13:35 ` Philipp Zabel
2015-02-09 10:47 ` [PATCH 02/13] clk: mediatek: Add initial common clock support for Mediatek SoCs Sascha Hauer
2015-02-13 7:41 ` Tomasz Figa
2015-02-13 12:06 ` Sascha Hauer
2015-02-13 13:22 ` Tomasz Figa
2015-02-09 10:47 ` [PATCH 03/13] clk: mediatek: Add reset controller support Sascha Hauer
2015-02-09 13:35 ` Philipp Zabel
2015-02-09 10:47 ` [PATCH 04/13] clk: mediatek: Add basic clocks for Mediatek MT8135 Sascha Hauer
2015-02-09 10:47 ` [PATCH 05/13] clk: dts: mediatek: add Mediatek MT8173 clock bindings Sascha Hauer
2015-02-09 10:47 ` [PATCH 06/13] clk: mediatek: Add basic clocks for Mediatek MT8173 Sascha Hauer
2015-02-13 9:56 ` Tomasz Figa
2015-02-19 8:24 ` Sascha Hauer
2015-02-09 10:47 ` [PATCH 07/13] dt: bindings: Add MediaTek MT8135/MT8173 reset controller defines Sascha Hauer
2015-02-09 10:47 ` [PATCH 08/13] soc: mediatek: Add PMIC wrapper for MT8135 and MT6397 SoC Sascha Hauer
2015-02-09 10:47 ` [PATCH 09/13] ARM: dts: mediatek: Enable clock support for Mediatek MT8135 Sascha Hauer
2015-02-09 10:51 ` Russell King - ARM Linux
2015-02-09 11:25 ` Sascha Hauer
2015-02-09 11:27 ` Russell King - ARM Linux
2015-02-09 11:44 ` Sascha Hauer
2015-02-09 10:47 ` [PATCH 10/13] ARM: dts: mt8135: Add pmic wrapper nodes Sascha Hauer
2015-02-09 10:47 ` [PATCH 11/13] ARM: dts: mt8135-evbp1: Add PMIC support Sascha Hauer
2015-02-09 10:47 ` Sascha Hauer [this message]
2015-02-09 10:47 ` [PATCH 13/13] mfd: Add support for the MediaTek MT6397 PMIC Sascha Hauer
2015-02-16 9:56 ` Lee Jones
[not found] ` <20150218181904.421.59675@quantum>
[not found] ` <20150219082655.GV12209@pengutronix.de>
[not found] ` <20150219084349.GA12212@x1>
[not found] ` <20150219120409.GW12209@pengutronix.de>
[not found] ` <20150219121304.GH12212@x1>
2015-02-19 21:41 ` Mike Turquette
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1423478845-2835-13-git-send-email-s.hauer@pengutronix.de \
--to=s.hauer@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).