From: sebastian.hesselbarth@gmail.com (Sebastian Hesselbarth)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 0/8] Add proper support for Compulab CM-A510/SBC-A510
Date: Tue, 17 Feb 2015 19:52:01 +0100 [thread overview]
Message-ID: <1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com> (raw)
This patch set improves current mainline support for the Compulab
CM-A510 System-on-Module (SoM) and its default Compulab SBC-A510
base board. Thanks to Gabriel Dobato who agreed to remote debug and
test the provided DT changes.
On the way to proper support, we
- Rework i2c-mux-pinctrl to honor disabled sub-bus nodes
- Add missing "compulab" vendor prefix
- Fix broken uart[23] reg properties
- Beautify Dove's dtsi files by adding gpio/irq includes, node
labels for pcie, and some additional pinctrl settings
- Add a node for the internal i2c mux mechanism on Dove SoCs
And finally add a DT include for the Compulab CM-A510 SoM and a DT
board file for the SBC-A510 base board.
Patches are based on stable v3.19 and are indended for the next
merge window (either v3.21 or v4.1). Compulab related changes have
been tested by Gabriel Dobato, I tested on SolidRun CuBox that it
does not break existing Dove boards.
For the i2c-mux-pinctrl, a Tested-by from any user of Tegra20
Seaboard, Tamonten, or Ventana would be nice to see if it is fully
compatible.
I have added MVEBU maintainers to all patches, Wolfram for i2c and
Stephen as the i2c-mux-pinctrl author i2c-mux-pinctrl related patches,
and corresponding lists. As there is no important DT work in here,
I decided to not explicitly add each of the DT maintainers except for
the vendor prefix patch.
Sebastian Hesselbarth (8):
i2c: mux-pinctrl: Rework to honor disabled child nodes
devicetree: vendor-prefixes: Add CompuLab to known vendors
ARM: dts: dove: Fix uart[23] reg property
ARM: dts: dove: Always include gpio and interrupt-controller headers
ARM: dts: dove: Add node labels for PCIe ports 0 and 1
ARM: dts: dove: Add some more common pinctrl settings
ARM: dts: dove: Add internal i2c multiplexer node
ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510
.../devicetree/bindings/i2c/i2c-mux-pinctrl.txt | 28 +--
.../devicetree/bindings/vendor-prefixes.txt | 1 +
arch/arm/boot/dts/Makefile | 5 +-
arch/arm/boot/dts/dove-cm-a510.dts | 38 ----
arch/arm/boot/dts/dove-cm-a510.dtsi | 195 +++++++++++++++++++++
arch/arm/boot/dts/dove-sbc-a510.dts | 182 +++++++++++++++++++
arch/arm/boot/dts/dove.dtsi | 103 ++++++++++-
drivers/i2c/muxes/i2c-mux-pinctrl.c | 70 +++++---
8 files changed, 537 insertions(+), 85 deletions(-)
delete mode 100644 arch/arm/boot/dts/dove-cm-a510.dts
create mode 100644 arch/arm/boot/dts/dove-cm-a510.dtsi
create mode 100644 arch/arm/boot/dts/dove-sbc-a510.dts
---
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Gregory Clement <gregory.clement@free-electrons.com>
Cc: Gabriel Dobato <dobatog@gmail.com>
Cc: Wolfram Sang <wsa@the-dreams.de>
Cc: Stephen Warren <swarren@wwwdotorg.org>
Cc: linux-i2c at vger.kernel.org
Cc: devicetree at vger.kernel.org
Cc: linux-arm-kernel at lists.infradead.org
Cc: linux-kernel at vger.kernel.org
--
2.1.0
next reply other threads:[~2015-02-17 18:52 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-02-17 18:52 Sebastian Hesselbarth [this message]
2015-02-17 18:52 ` [PATCH 1/8] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth
2015-02-17 20:46 ` Stephen Warren
2015-02-17 21:08 ` Sebastian Hesselbarth
2015-02-17 21:15 ` Stephen Warren
2015-02-17 21:19 ` Sebastian Hesselbarth
2015-02-26 21:46 ` Stephen Warren
2015-02-17 18:52 ` [PATCH 2/8] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-17 19:37 ` Rob Herring
2015-02-17 18:52 ` [PATCH 3/8] ARM: dts: dove: Fix uart[23] reg property Sebastian Hesselbarth
2015-02-23 14:54 ` Gregory CLEMENT
2015-02-17 18:52 ` [PATCH 4/8] ARM: dts: dove: Always include gpio and interrupt-controller headers Sebastian Hesselbarth
2015-02-23 14:54 ` Gregory CLEMENT
2015-02-17 18:52 ` [PATCH 5/8] ARM: dts: dove: Add node labels for PCIe ports 0 and 1 Sebastian Hesselbarth
2015-02-23 14:55 ` Gregory CLEMENT
2015-02-17 18:52 ` [PATCH 6/8] ARM: dts: dove: Add some more common pinctrl settings Sebastian Hesselbarth
2015-02-23 14:56 ` Gregory CLEMENT
2015-02-17 18:52 ` [PATCH 7/8] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
2015-02-23 15:07 ` Gregory CLEMENT
2015-02-17 18:52 ` [PATCH 8/8] ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth
2015-02-26 17:55 ` [PATCH 0/8] " Gregory CLEMENT
2015-02-26 19:39 ` Sebastian Hesselbarth
2015-02-26 20:01 ` Stephen Warren
2015-02-26 20:35 ` Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 0/4] " Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 1/4] i2c: mux-pinctrl: Rework to honor disabled child nodes Sebastian Hesselbarth
2015-03-02 20:01 ` Stephen Warren
2015-03-04 9:10 ` Sebastian Hesselbarth
2015-03-09 12:21 ` [PATCH v3 " Sebastian Hesselbarth
2015-03-10 16:28 ` Stephen Warren
2015-03-16 20:15 ` Sebastian Hesselbarth
2015-03-18 12:30 ` Wolfram Sang
2015-03-18 13:23 ` Sebastian Hesselbarth
2015-03-18 14:00 ` Wolfram Sang
2015-03-18 23:10 ` Sebastian Hesselbarth
2015-03-19 10:09 ` Wolfram Sang
2015-03-19 10:48 ` Wolfram Sang
2015-03-19 15:47 ` Stephen Warren
2015-03-19 16:02 ` Wolfram Sang
2015-03-19 16:49 ` Stephen Warren
2015-03-19 20:52 ` Sebastian Hesselbarth
2015-03-20 10:19 ` Wolfram Sang
2015-03-21 21:00 ` Wolfram Sang
2015-03-22 13:03 ` Sebastian Hesselbarth
2015-03-23 18:32 ` Wolfram Sang
2015-03-27 21:08 ` Sebastian Hesselbarth
2015-04-03 18:17 ` Wolfram Sang
2015-02-27 12:24 ` [PATCH v2 2/4] devicetree: vendor-prefixes: Add CompuLab to known vendors Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 3/4] ARM: dts: dove: Add internal i2c multiplexer node Sebastian Hesselbarth
2015-02-27 12:24 ` [PATCH v2 4/4] ARM: dts: dove: Add proper support for Compulab CM-A510/SBC-A510 Sebastian Hesselbarth
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1424199129-22099-1-git-send-email-sebastian.hesselbarth@gmail.com \
--to=sebastian.hesselbarth@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).