From mboxrd@z Thu Jan 1 00:00:00 1970 From: p.zabel@pengutronix.de (Philipp Zabel) Date: Mon, 23 Feb 2015 18:40:15 +0100 Subject: [PATCH v9 5/5] ARM: dts: imx6qdl: Allow disabling the PU regulator, add a enable ramp delay In-Reply-To: <1424713215-3357-1-git-send-email-p.zabel@pengutronix.de> References: <1424713215-3357-1-git-send-email-p.zabel@pengutronix.de> Message-ID: <1424713215-3357-6-git-send-email-p.zabel@pengutronix.de> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The PU regulator is enabled during boot, but not necessarily always-on. It can be disabled by the generic pm domain framework when the PU power domain is shut down. The ramp delay of 150 us might be a bit conservative, the value is taken from the Freescale kernel. Signed-off-by: Philipp Zabel --- Changes since v8: - Removed regulator-boot-on, this depends on the bootloader --- arch/arm/boot/dts/imx6qdl.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/imx6qdl.dtsi b/arch/arm/boot/dts/imx6qdl.dtsi index 7ab00a4..4b12ac0 100644 --- a/arch/arm/boot/dts/imx6qdl.dtsi +++ b/arch/arm/boot/dts/imx6qdl.dtsi @@ -598,7 +598,7 @@ regulator-name = "vddpu"; regulator-min-microvolt = <725000>; regulator-max-microvolt = <1450000>; - regulator-always-on; + regulator-enable-ramp-delay = <150>; anatop-reg-offset = <0x140>; anatop-vol-bit-shift = <9>; anatop-vol-bit-width = <5>; -- 2.1.4