From mboxrd@z Thu Jan 1 00:00:00 1970 From: mathieu@codeaurora.org (Mathieu Olivari) Date: Tue, 24 Feb 2015 16:21:56 -0800 Subject: [PATCH 2/2] ARM: dts: qcom: add stdout-path to AP148 In-Reply-To: <1424823716-7504-1-git-send-email-mathieu@codeaurora.org> References: <1424823716-7504-1-git-send-email-mathieu@codeaurora.org> Message-ID: <1424823716-7504-2-git-send-email-mathieu@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org AP148 default console output is uart4, so this change adds a serial0 alias to it, as well add the corresponding stdout-path. This will avoid having to set these as chosen. Signed-off-by: Mathieu Olivari --- arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts index 55b2910..208bb79 100644 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts @@ -14,6 +14,14 @@ }; }; + alias { + serial0 = &uart4; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + soc { pinmux at 800000 { i2c4_pins: i2c4_pinmux { -- 1.9.1