* [PATCH] ARM: mx25: Remove mach-mx25_3ds board file
@ 2015-02-28 15:40 Fabio Estevam
2015-02-28 15:42 ` Fabio Estevam
2015-03-03 3:54 ` Shawn Guo
0 siblings, 2 replies; 5+ messages in thread
From: Fabio Estevam @ 2015-02-28 15:40 UTC (permalink / raw)
To: linux-arm-kernel
From: Fabio Estevam <fabio.estevam@freescale.com>
imx25-pdk.dts provides a more complete support than the board file version, so
let's get rid of the board file.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
---
arch/arm/mach-imx/Kconfig | 15 ---
arch/arm/mach-imx/Makefile | 1 -
arch/arm/mach-imx/mach-mx25_3ds.c | 270 --------------------------------------
3 files changed, 286 deletions(-)
delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c
diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
index e8627e0..aaea738 100644
--- a/arch/arm/mach-imx/Kconfig
+++ b/arch/arm/mach-imx/Kconfig
@@ -151,21 +151,6 @@ config MACH_MX21ADS
comment "MX25 platforms:"
-config MACH_MX25_3DS
- bool "Support MX25PDK (3DS) Platform"
- select IMX_HAVE_PLATFORM_FLEXCAN
- select IMX_HAVE_PLATFORM_FSL_USB2_UDC
- select IMX_HAVE_PLATFORM_IMX2_WDT
- select IMX_HAVE_PLATFORM_IMXDI_RTC
- select IMX_HAVE_PLATFORM_IMX_FB
- select IMX_HAVE_PLATFORM_IMX_I2C
- select IMX_HAVE_PLATFORM_IMX_KEYPAD
- select IMX_HAVE_PLATFORM_IMX_UART
- select IMX_HAVE_PLATFORM_MXC_EHCI
- select IMX_HAVE_PLATFORM_MXC_NAND
- select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
- select SOC_IMX25
-
config MACH_EUKREA_CPUIMX25SD
bool "Support Eukrea CPUIMX25 Platform"
select IMX_HAVE_PLATFORM_FLEXCAN
diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
index 8d1b101..e92ede9 100644
--- a/arch/arm/mach-imx/Makefile
+++ b/arch/arm/mach-imx/Makefile
@@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
# i.MX25 based machines
-obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
deleted file mode 100644
index 0d01e36..0000000
--
1.9.1
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] ARM: mx25: Remove mach-mx25_3ds board file
2015-02-28 15:40 [PATCH] ARM: mx25: Remove mach-mx25_3ds board file Fabio Estevam
@ 2015-02-28 15:42 ` Fabio Estevam
2015-02-28 20:24 ` Eric Bénard
2015-03-03 3:54 ` Shawn Guo
1 sibling, 1 reply; 5+ messages in thread
From: Fabio Estevam @ 2015-02-28 15:42 UTC (permalink / raw)
To: linux-arm-kernel
Hi Eric,
On Sat, Feb 28, 2015 at 12:40 PM, Fabio Estevam <festevam@gmail.com> wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> imx25-pdk.dts provides a more complete support than the board file version, so
> let's get rid of the board file.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Do you mind if I submit a patch removing the eukrea mx25 board files?
If this is possible, then we can convert mx25 to a dt-only platform.
Regards,
Fabio Estevam
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: mx25: Remove mach-mx25_3ds board file
2015-02-28 15:42 ` Fabio Estevam
@ 2015-02-28 20:24 ` Eric Bénard
0 siblings, 0 replies; 5+ messages in thread
From: Eric Bénard @ 2015-02-28 20:24 UTC (permalink / raw)
To: linux-arm-kernel
Hi Fabio,
Le Sat, 28 Feb 2015 12:42:45 -0300,
Fabio Estevam <festevam@gmail.com> a ?crit :
> On Sat, Feb 28, 2015 at 12:40 PM, Fabio Estevam <festevam@gmail.com> wrote:
> > From: Fabio Estevam <fabio.estevam@freescale.com>
> >
> > imx25-pdk.dts provides a more complete support than the board file version, so
> > let's get rid of the board file.
> >
> > Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>
> Do you mind if I submit a patch removing the eukrea mx25 board files?
>
> If this is possible, then we can convert mx25 to a dt-only platform.
>
no problem on our side, it was supposed to be removed after DT support
for this board was accepted but it seems the patch was never sent ;-)
Best regards,
Eric
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: mx25: Remove mach-mx25_3ds board file
2015-02-28 15:40 [PATCH] ARM: mx25: Remove mach-mx25_3ds board file Fabio Estevam
2015-02-28 15:42 ` Fabio Estevam
@ 2015-03-03 3:54 ` Shawn Guo
2015-03-03 4:10 ` Shawn Guo
1 sibling, 1 reply; 5+ messages in thread
From: Shawn Guo @ 2015-03-03 3:54 UTC (permalink / raw)
To: linux-arm-kernel
On Sat, Feb 28, 2015 at 12:40:35PM -0300, Fabio Estevam wrote:
> From: Fabio Estevam <fabio.estevam@freescale.com>
>
> imx25-pdk.dts provides a more complete support than the board file version, so
> let's get rid of the board file.
>
> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
It applies neither my branch nor v4.0-rc1. Can you please generate the
patch against imx/soc branch?
Shawn
> ---
> arch/arm/mach-imx/Kconfig | 15 ---
> arch/arm/mach-imx/Makefile | 1 -
> arch/arm/mach-imx/mach-mx25_3ds.c | 270 --------------------------------------
> 3 files changed, 286 deletions(-)
> delete mode 100644 arch/arm/mach-imx/mach-mx25_3ds.c
>
> diff --git a/arch/arm/mach-imx/Kconfig b/arch/arm/mach-imx/Kconfig
> index e8627e0..aaea738 100644
> --- a/arch/arm/mach-imx/Kconfig
> +++ b/arch/arm/mach-imx/Kconfig
> @@ -151,21 +151,6 @@ config MACH_MX21ADS
>
> comment "MX25 platforms:"
>
> -config MACH_MX25_3DS
> - bool "Support MX25PDK (3DS) Platform"
> - select IMX_HAVE_PLATFORM_FLEXCAN
> - select IMX_HAVE_PLATFORM_FSL_USB2_UDC
> - select IMX_HAVE_PLATFORM_IMX2_WDT
> - select IMX_HAVE_PLATFORM_IMXDI_RTC
> - select IMX_HAVE_PLATFORM_IMX_FB
> - select IMX_HAVE_PLATFORM_IMX_I2C
> - select IMX_HAVE_PLATFORM_IMX_KEYPAD
> - select IMX_HAVE_PLATFORM_IMX_UART
> - select IMX_HAVE_PLATFORM_MXC_EHCI
> - select IMX_HAVE_PLATFORM_MXC_NAND
> - select IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
> - select SOC_IMX25
> -
> config MACH_EUKREA_CPUIMX25SD
> bool "Support Eukrea CPUIMX25 Platform"
> select IMX_HAVE_PLATFORM_FLEXCAN
> diff --git a/arch/arm/mach-imx/Makefile b/arch/arm/mach-imx/Makefile
> index 8d1b101..e92ede9 100644
> --- a/arch/arm/mach-imx/Makefile
> +++ b/arch/arm/mach-imx/Makefile
> @@ -49,7 +49,6 @@ obj-$(CONFIG_MACH_IMX1_DT) += imx1-dt.o
> obj-$(CONFIG_MACH_MX21ADS) += mach-mx21ads.o
>
> # i.MX25 based machines
> -obj-$(CONFIG_MACH_MX25_3DS) += mach-mx25_3ds.o
> obj-$(CONFIG_MACH_EUKREA_CPUIMX25SD) += mach-eukrea_cpuimx25.o
> obj-$(CONFIG_MACH_EUKREA_MBIMXSD25_BASEBOARD) += eukrea_mbimxsd25-baseboard.o
> obj-$(CONFIG_MACH_IMX25_DT) += imx25-dt.o
> diff --git a/arch/arm/mach-imx/mach-mx25_3ds.c b/arch/arm/mach-imx/mach-mx25_3ds.c
> deleted file mode 100644
> index 0d01e36..0000000
> --
> 1.9.1
>
^ permalink raw reply [flat|nested] 5+ messages in thread
* [PATCH] ARM: mx25: Remove mach-mx25_3ds board file
2015-03-03 3:54 ` Shawn Guo
@ 2015-03-03 4:10 ` Shawn Guo
0 siblings, 0 replies; 5+ messages in thread
From: Shawn Guo @ 2015-03-03 4:10 UTC (permalink / raw)
To: linux-arm-kernel
On Tue, Mar 3, 2015 at 11:54 AM, Shawn Guo <shawn.guo@linaro.org> wrote:
> On Sat, Feb 28, 2015 at 12:40:35PM -0300, Fabio Estevam wrote:
>> From: Fabio Estevam <fabio.estevam@freescale.com>
>>
>> imx25-pdk.dts provides a more complete support than the board file version, so
>> let's get rid of the board file.
>>
>> Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
>
> It applies neither my branch nor v4.0-rc1. Can you please generate the
> patch against imx/soc branch?
Sorry, I meant imx/cleanup branch.
Shawn
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2015-03-03 4:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-02-28 15:40 [PATCH] ARM: mx25: Remove mach-mx25_3ds board file Fabio Estevam
2015-02-28 15:42 ` Fabio Estevam
2015-02-28 20:24 ` Eric Bénard
2015-03-03 3:54 ` Shawn Guo
2015-03-03 4:10 ` Shawn Guo
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox