From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC
Date: Mon, 2 Mar 2015 12:32:29 +0530 [thread overview]
Message-ID: <1425279749-16625-7-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1425279749-16625-1-git-send-email-rnayak@codeaurora.org>
Add the GDSC instances that exist as part of apq8084 GCC block
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
drivers/clk/qcom/gcc-apq8084.c | 38 ++++++++++++++++++++++++++++
include/dt-bindings/clock/qcom,gcc-apq8084.h | 6 +++++
2 files changed, 44 insertions(+)
diff --git a/drivers/clk/qcom/gcc-apq8084.c b/drivers/clk/qcom/gcc-apq8084.c
index e3ef902..ccab028 100644
--- a/drivers/clk/qcom/gcc-apq8084.c
+++ b/drivers/clk/qcom/gcc-apq8084.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
#define P_XO 0
#define P_GPLL0 1
@@ -3251,6 +3252,34 @@ static struct clk_branch gcc_usb_hsic_system_clk = {
},
};
+static struct gdsc usb_hs_hsic_gdsc = {
+ .gdscr = 0x404,
+ .pd = {
+ .name = "usb_hs_hsic",
+ },
+};
+
+static struct gdsc pcie0_gdsc = {
+ .gdscr = 0x1ac4,
+ .pd = {
+ .name = "pcie0",
+ },
+};
+
+static struct gdsc pcie1_gdsc = {
+ .gdscr = 0x1b44,
+ .pd = {
+ .name = "pcie1",
+ },
+};
+
+static struct gdsc usb30_gdsc = {
+ .gdscr = 0x1e84,
+ .pd = {
+ .name = "usb30",
+ },
+};
+
static struct clk_regmap *gcc_apq8084_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -3444,6 +3473,13 @@ static struct clk_regmap *gcc_apq8084_clocks[] = {
[GCC_USB_HSIC_SYSTEM_CLK] = &gcc_usb_hsic_system_clk.clkr,
};
+static struct generic_pm_domain *gcc_apq8084_gdscs[] = {
+ [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc.pd,
+ [PCIE0_GDSC] = &pcie0_gdsc.pd,
+ [PCIE1_GDSC] = &pcie1_gdsc.pd,
+ [USB30_GDSC] = &usb30_gdsc.pd,
+};
+
static const struct qcom_reset_map gcc_apq8084_resets[] = {
[GCC_SYSTEM_NOC_BCR] = { 0x0100 },
[GCC_CONFIG_NOC_BCR] = { 0x0140 },
@@ -3552,6 +3588,8 @@ static const struct qcom_cc_desc gcc_apq8084_desc = {
.num_clks = ARRAY_SIZE(gcc_apq8084_clocks),
.resets = gcc_apq8084_resets,
.num_resets = ARRAY_SIZE(gcc_apq8084_resets),
+ .gdscs = gcc_apq8084_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_apq8084_gdscs),
};
static const struct of_device_id gcc_apq8084_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-apq8084.h b/include/dt-bindings/clock/qcom,gcc-apq8084.h
index 2c0da56..5aa7ebe 100644
--- a/include/dt-bindings/clock/qcom,gcc-apq8084.h
+++ b/include/dt-bindings/clock/qcom,gcc-apq8084.h
@@ -348,4 +348,10 @@
#define GCC_PCIE_1_PIPE_CLK 331
#define GCC_PCIE_1_SLV_AXI_CLK 332
+/* gdscs */
+#define USB_HS_HSIC_GDSC 0
+#define PCIE0_GDSC 1
+#define PCIE1_GDSC 2
+#define USB30_GDSC 3
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-03-02 7:02 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 7:02 [PATCH 0/6] Add support for QCOM GDSCs Rajendra Nayak
2015-03-02 7:02 ` [PATCH 1/6] clk: qcom: Add support for GDSCs Rajendra Nayak
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-02 7:02 ` [PATCH 2/6] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-03-05 12:47 ` Stanimir Varbanov
2015-03-02 7:02 ` [PATCH 3/6] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-03-02 7:02 ` [PATCH 4/6] clk: qcom: gdsc: Add GDSCs in msm8974 GCC Rajendra Nayak
2015-03-02 7:02 ` [PATCH 5/6] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-03-02 7:02 ` Rajendra Nayak [this message]
2015-03-05 16:55 ` [PATCH 0/6] Add support for QCOM GDSCs Stanimir Varbanov
2015-03-06 4:31 ` Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425279749-16625-7-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).