From: wangnan0@huawei.com (Wang Nan)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH v4 01/34] x86, traps: Enable DEBUG_STACK after cpu_init() for TRAP_DB/BP.
Date: Mon, 2 Mar 2015 22:24:39 +0800 [thread overview]
Message-ID: <1425306312-3437-2-git-send-email-wangnan0@huawei.com> (raw)
In-Reply-To: <1425306312-3437-1-git-send-email-wangnan0@huawei.com>
Before this patch early_trap_init() installs DEBUG_STACK for X86_TRAP_BP
and X86_TRAP_DB. However, DEBUG_STACK doesn't work correctly until
cpu_init() <-- trap_init().
This patch passes 0 to set_intr_gate_ist() and
set_system_intr_gate_ist() instead of DEBUG_STACK to let it use same
stack as kernel, and installs DEBUG_STACK for them in trap_init().
As core runs at ring 0 between early_trap_init() and trap_init(), there
is no chance to get a bad stack before trap_init().
As NMI is also enabled in trap_init(), we don't need to care about
is_debug_stack() and related things used in arch/x86/kernel/nmi.c.
Signed-off-by: Wang Nan <wangnan0@huawei.com>
---
arch/x86/kernel/traps.c | 21 +++++++++++++++++++--
1 file changed, 19 insertions(+), 2 deletions(-)
diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c
index 9d2073e..4281988 100644
--- a/arch/x86/kernel/traps.c
+++ b/arch/x86/kernel/traps.c
@@ -925,9 +925,17 @@ dotraplinkage void do_iret_error(struct pt_regs *regs, long error_code)
/* Set of traps needed for early debugging. */
void __init early_trap_init(void)
{
- set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
+ /*
+ * Don't set ist to DEBUG_STACK as it doesn't work until TSS is
+ * ready in cpu_init() <-- trap_init(). Before trap_init(), CPU
+ * runs at ring 0 so it is impossible to hit an invalid stack.
+ * Using the original stack works well enough@this early
+ * stage. DEBUG_STACK will be equipped after cpu_init() in
+ * trap_init().
+ */
+ set_intr_gate_ist(X86_TRAP_DB, &debug, 0);
/* int3 can be called from all */
- set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
+ set_system_intr_gate_ist(X86_TRAP_BP, &int3, 0);
#ifdef CONFIG_X86_32
set_intr_gate(X86_TRAP_PF, page_fault);
#endif
@@ -1005,6 +1013,15 @@ void __init trap_init(void)
*/
cpu_init();
+ /*
+ * X86_TRAP_DB and X86_TRAP_BP have been set
+ * in early_trap_init(). However, DEBUG_STACK works only after
+ * cpu_init() loads TSS. See comments in early_trap_init().
+ */
+ set_intr_gate_ist(X86_TRAP_DB, &debug, DEBUG_STACK);
+ /* int3 can be called from all */
+ set_system_intr_gate_ist(X86_TRAP_BP, &int3, DEBUG_STACK);
+
x86_init.irqs.trap_init();
#ifdef CONFIG_X86_64
--
1.8.4
next prev parent reply other threads:[~2015-03-02 14:24 UTC|newest]
Thread overview: 50+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-02 14:24 [RFC PATCH v4 00/34] Early kprobe: enable kprobes at very early booting stage Wang Nan
2015-03-02 14:24 ` Wang Nan [this message]
2015-03-02 14:24 ` [RFC PATCH v4 02/34] x86, traps: separate set_intr_gate() and cleanup early_trap_init() Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 03/34] x86, traps: install gates using IST after cpu_init() Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 04/34] early kprobes: within_kprobe_blacklist_early() early Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 05/34] early kprobes: introduce kprobe_is_early for futher early kprobe use Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 06/34] early kprobes: enable kprobe smoke test for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 07/34] early kprobes: init kprobes at very early stage Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 08/34] early kprobes: ARM: add definition for vmlinux.lds use Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 09/34] early kprobes: x86: " Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 10/34] early kprobes: introduce early kprobes related code area Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 11/34] early kprobes: introduces macros for allocing early kprobe resources Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 12/34] early kprobes: allows __alloc_insn_slot() from early kprobes slots Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 13/34] early kprobes: alloc optimized kprobe before memory system is ready Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 14/34] early kprobes: use stop_machine() based x86 optimizer Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 15/34] early kprobes: use stop_machine() based optimization method for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 16/34] early kprobes: perhibit probing at early kprobe reserved area Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 17/34] early kprobes: run kprobes smoke test for early kprobes Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 18/34] early kprobes: add CONFIG_EARLY_KPROBES option Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 19/34] ftrace: don't update record flags if code modification fail Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 20/34] ftrace/x86: Ensure rec->flags no change when failure occures Wang Nan
2015-03-02 14:24 ` [RFC PATCH v4 21/34] ftrace: sort ftrace entries earlier Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 22/34] ftrace: allow search ftrace addr before ftrace fully inited Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 23/34] ftrace: notify kprobe when ftrace is initialized Wang Nan
2015-03-03 16:29 ` Petr Mladek
2015-03-02 14:25 ` [RFC PATCH v4 24/34] early kprobes on ftrace: introduce x86 arch_fix_ftrace_early_kprobe() Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 25/34] ftrace: don't fire ftrace_bug if the instruction is taken by early kprobes Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 26/34] early kprobes on ftrace: x86: arch code for retrieving kprobed instruction Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 27/34] early kprobes on ftrace: kprobe_on_ftrace_get_old_insn() Wang Nan
2015-03-04 2:30 ` Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 28/34] ftrace: x86: get old instruction from early kprobes when make call Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 29/34] ftrace: x86: call kprobe_int3_handler() in ftrace int3 handler Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 30/34] early kprobes: convert early kprobes on ftrace to ftrace Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 31/34] early kprobes: enable early kprobes for x86 Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 32/34] early kprobes: enable 'ekprobe=' cmdline option for early kprobes Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 33/34] ftrace: enable make ftrace nop before ftrace_init() Wang Nan
2015-03-02 14:25 ` [RFC PATCH v4 34/34] early kprobes: enable optimization of kprobes on ftrace before ftrace is ready Wang Nan
2015-03-03 5:09 ` [PATCH 0/3] early kprobes: Fix bug in unregistering early kprobe before kprobe " Wang Nan
2015-03-03 5:09 ` [PATCH 1/3] early kprobes: make kprobes_on_ftrace_initialized public available Wang Nan
2015-03-03 5:09 ` [PATCH 2/3] ftrace/x86: don't return error if other makes a same code change Wang Nan
2015-03-03 5:09 ` [PATCH 3/3] early kprobes: x86: don't try to recover ftraced instruction before ftrace get ready Wang Nan
2015-03-03 17:06 ` Petr Mladek
2015-03-04 2:24 ` Wang Nan
2015-03-04 3:36 ` Masami Hiramatsu
2015-03-04 4:39 ` Wang Nan
2015-03-04 5:59 ` Masami Hiramatsu
2015-03-04 11:22 ` Wang Nan
2015-03-04 15:26 ` Masami Hiramatsu
2015-03-05 1:53 ` Wang Nan
2015-03-05 2:06 ` Wang Nan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1425306312-3437-2-git-send-email-wangnan0@huawei.com \
--to=wangnan0@huawei.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).