[PATCH 1/3] media: atmel-isi: move the peripheral clock to start/stop_stream() function

[josh.wu@atmel.com (Josh Wu)]

As the clock_start/stop() use to control the mclk for the sensor not the
ISI peripheral clock.
So we move them to start/stop_stream() function.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

 drivers/media/platform/soc_camera/atmel-isi.c | 12 ++++++------
 1 file changed, 6 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 1208818..eb179e7 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -386,6 +386,10 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	struct atmel_isi *isi = ici->priv;
 	int ret;
 
+	ret = clk_prepare_enable(isi->pclk);
+	if (ret)
+		return ret;
+
 	/* Reset ISI */
 	ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
 	if (ret < 0) {
@@ -445,6 +449,8 @@ static void stop_streaming(struct vb2_queue *vq)
 	ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
 	if (ret < 0)
 		dev_err(icd->parent, "Disable ISI timed out\n");
+
+	clk_disable_unprepare(isi->pclk);
 }
 
 static struct vb2_ops isi_video_qops = {
@@ -723,14 +729,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici)
 	struct atmel_isi *isi = ici->priv;
 	int ret;
 
-	ret = clk_prepare_enable(isi->pclk);
-	if (ret)
-		return ret;
-
 	if (!IS_ERR(isi->mck)) {
 		ret = clk_prepare_enable(isi->mck);
 		if (ret) {
-			clk_disable_unprepare(isi->pclk);
 			return ret;
 		}
 	}
@@ -745,7 +746,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici)
 
 	if (!IS_ERR(isi->mck))
 		clk_disable_unprepare(isi->mck);
-	clk_disable_unprepare(isi->pclk);
 }
 
 static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
-- 
1.9.1