From: tomasz.nowicki@linaro.org (Tomasz Nowicki)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v4 6/9] x86, pci: mmconfig_{32, 64}.c code refactoring - remove code duplication.
Date: Wed, 11 Mar 2015 15:12:46 +0100 [thread overview]
Message-ID: <1426083169-8698-7-git-send-email-tomasz.nowicki@linaro.org> (raw)
In-Reply-To: <1426083169-8698-1-git-send-email-tomasz.nowicki@linaro.org>
mmconfig_64.c version is going to be default implementation for arch
agnostic low-level direct PCI config space accessors for ECAM dirver.
However, now it initialize raw_pci_ext_ops pointer which is x86 specific
code only. Moreover, mmconfig_32.c is doing the same thing at the same time.
Move it to mmconfig_shared.c so it becomes common for both and
mmconfig_64.c turns out to be purely arch agnostic.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
---
arch/x86/pci/mmconfig-shared.c | 10 ++++++++--
arch/x86/pci/mmconfig_32.c | 10 ++--------
arch/x86/pci/mmconfig_64.c | 11 ++---------
include/linux/ecam.h | 5 +++++
4 files changed, 17 insertions(+), 19 deletions(-)
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index 5064302..6dfe614 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -29,6 +29,11 @@
static bool pci_mmcfg_running_state;
static bool pci_mmcfg_arch_init_failed;
+const struct pci_raw_ops pci_mmcfg = {
+ .read = pci_mmcfg_read,
+ .write = pci_mmcfg_write,
+};
+
static u32
pci_mmconfig_amd_read(int len, void __iomem *addr)
{
@@ -532,9 +537,10 @@ static void __init __pci_mmcfg_init(int early)
}
}
- if (pci_mmcfg_arch_init())
+ if (pci_mmcfg_arch_init()) {
+ raw_pci_ext_ops = &pci_mmcfg;
pci_probe = (pci_probe & ~PCI_PROBE_MASK) | PCI_PROBE_MMCONF;
- else {
+ } else {
free_all_mmcfg();
pci_mmcfg_arch_init_failed = true;
}
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 5cf6291..7a050cb 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -50,7 +50,7 @@ static void pci_exp_set_dev_base(unsigned int base, int bus, int devfn)
}
}
-static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
unsigned long flags;
@@ -79,7 +79,7 @@ err: *value = -1;
return 0;
}
-static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
unsigned long flags;
@@ -106,15 +106,9 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
return 0;
}
-const struct pci_raw_ops pci_mmcfg = {
- .read = pci_mmcfg_read,
- .write = pci_mmcfg_write,
-};
-
int __init pci_mmcfg_arch_init(void)
{
printk(KERN_INFO "PCI: Using MMCONFIG for extended config space\n");
- raw_pci_ext_ops = &pci_mmcfg;
return 1;
}
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index b62ff18..fd857ea 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -25,7 +25,7 @@ static char __iomem *pci_dev_base(unsigned int seg, unsigned int bus, unsigned i
return NULL;
}
-static int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+int pci_mmcfg_read(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 *value)
{
char __iomem *addr;
@@ -49,7 +49,7 @@ err: *value = -1;
return 0;
}
-static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+int pci_mmcfg_write(unsigned int seg, unsigned int bus,
unsigned int devfn, int reg, int len, u32 value)
{
char __iomem *addr;
@@ -71,11 +71,6 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
return 0;
}
-const struct pci_raw_ops pci_mmcfg = {
- .read = pci_mmcfg_read,
- .write = pci_mmcfg_write,
-};
-
static void __iomem *mcfg_ioremap(struct pci_mmcfg_region *cfg)
{
void __iomem *addr;
@@ -101,8 +96,6 @@ int __init pci_mmcfg_arch_init(void)
return 0;
}
- raw_pci_ext_ops = &pci_mmcfg;
-
return 1;
}
diff --git a/include/linux/ecam.h b/include/linux/ecam.h
index 2387df5..fba5d6b 100644
--- a/include/linux/ecam.h
+++ b/include/linux/ecam.h
@@ -47,5 +47,10 @@ extern struct list_head pci_mmcfg_list;
#define PCI_MMCFG_BUS_OFFSET(bus) ((bus) << 20)
+int pci_mmcfg_read(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 *value);
+int pci_mmcfg_write(unsigned int seg, unsigned int bus,
+ unsigned int devfn, int reg, int len, u32 value);
+
#endif /* __KERNEL__ */
#endif /* __ECAM_H */
--
1.9.1
next prev parent reply other threads:[~2015-03-11 14:12 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-11 14:12 [PATCH v4 0/9] PCI: MMCONFIG clean up Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 1/9] x86, pci: Clean up comment about buggy MMIO config space access for AMD Fam10h CPUs Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 2/9] x86, pci: Abstract PCI config accessors and use AMD Fam10h workaround exclusively Tomasz Nowicki
2015-03-11 15:19 ` Rob Herring
2015-03-11 14:12 ` [PATCH v4 3/9] x86, pci: Reorder logic of pci_mmconfig_insert() function Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 4/9] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 5/9] pci, acpi, mcfg: Provide generic implementation of MCFG code initialization Tomasz Nowicki
2015-03-11 14:12 ` Tomasz Nowicki [this message]
2015-03-11 14:12 ` [PATCH v4 7/9] x86, pci, ecam: mmconfig_64.c becomes default implementation for ECAM driver Tomasz Nowicki
2015-03-11 15:37 ` Rob Herring
2015-03-12 13:42 ` Tomasz Nowicki
2015-03-11 16:30 ` Brian Gerst
2015-03-12 13:42 ` Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 8/9] pci, acpi, mcfg: Share ACPI PCI config space accessors Tomasz Nowicki
2015-03-11 14:12 ` [PATCH v4 9/9] pci, ecam: Improve naming for ecam.c content and areas where it is used Tomasz Nowicki
2015-04-03 12:06 ` [PATCH v4 0/9] PCI: MMCONFIG clean up Tomasz Nowicki
2015-04-03 15:20 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426083169-8698-7-git-send-email-tomasz.nowicki@linaro.org \
--to=tomasz.nowicki@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).