linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: eliad@wizery.com (Eliad Peller)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 0/6] wlcore: add device-tree support
Date: Thu, 12 Mar 2015 14:09:08 +0200	[thread overview]
Message-ID: <1426162154-8716-1-git-send-email-eliad@wizery.com> (raw)

Add device-tree support to the wlcore (wl12xx/wl18xx)
driver.

Update the current users to use the bindings instead
of pdata-quirks.

Finally, remove the deprecated wl12xx_platform_data
struct (along with the da850 board file code that
still uses it)

NOTE: all the platform patches were compile-tested
only. I'm looking for some wl12xx card (that i should
have somewhere) to test the wl12xx changes (wrt. clocks),
but haven't found it yet.

v6:
* Add Luca's patches to pass irq_trigger/freq
* Support wl12xx as well
* Update all relevant platforms

Eliad Peller (4):
  dt: bindings: add TI's wilink wireless device
  wlcore: add device-tree support
  ARM: dts: add wl12xx/wl18xx bindings
  wlcore: remove wl12xx_platform_data

Luciano Coelho (2):
  wlcore: set irq_trigger in board files instead of hiding behind a
    quirk
  wl12xx: use frequency instead of enumerations for pdata clocks

 .../devicetree/bindings/net/wireless/ti,wlcore.txt |  47 +++++++++
 arch/arm/boot/dts/am335x-evmsk.dts                 |  11 ++
 arch/arm/boot/dts/omap3-cm-t3517.dts               |  10 ++
 arch/arm/boot/dts/omap3-cm-t3730.dts               |  10 ++
 arch/arm/boot/dts/omap3-evm-common.dtsi            |  10 ++
 arch/arm/boot/dts/omap3-igep0020-rev-f.dts         |   9 ++
 arch/arm/boot/dts/omap3-igep0030-rev-g.dts         |   9 ++
 arch/arm/boot/dts/omap3-zoom3.dts                  |  10 ++
 arch/arm/boot/dts/omap4-panda-common.dtsi          |  10 ++
 arch/arm/boot/dts/omap4-sdp.dts                    |  11 ++
 arch/arm/boot/dts/omap4-var-som-om44-wlan.dtsi     |  10 ++
 arch/arm/mach-davinci/Kconfig                      |  11 --
 arch/arm/mach-davinci/board-da850-evm.c            | 112 ---------------------
 arch/arm/mach-omap2/pdata-quirks.c                 |  79 ---------------
 drivers/net/wireless/ti/wilink_platform_data.c     |  25 -----
 drivers/net/wireless/ti/wl12xx/main.c              |  63 ++++++++++--
 drivers/net/wireless/ti/wl12xx/wl12xx.h            |  28 ++++++
 drivers/net/wireless/ti/wlcore/boot.c              |   1 -
 drivers/net/wireless/ti/wlcore/debugfs.c           |   2 +-
 drivers/net/wireless/ti/wlcore/main.c              |  31 +++---
 drivers/net/wireless/ti/wlcore/sdio.c              |  64 ++++++++++--
 drivers/net/wireless/ti/wlcore/wlcore.h            |   5 +-
 drivers/net/wireless/ti/wlcore/wlcore_i.h          |   8 +-
 include/linux/wl12xx.h                             |  49 ---------
 24 files changed, 313 insertions(+), 312 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/wireless/ti,wlcore.txt

-- 
1.8.5.2.229.g4448466.dirty

             reply	other threads:[~2015-03-12 12:09 UTC|newest]

Thread overview: 32+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-03-12 12:09 Eliad Peller [this message]
2015-03-12 12:09 ` [PATCH v6 1/6] wlcore: set irq_trigger in board files instead of hiding behind a quirk Eliad Peller
2015-03-12 12:09 ` [PATCH v6 2/6] wl12xx: use frequency instead of enumerations for pdata clocks Eliad Peller
2015-03-13 15:00   ` Tony Lindgren
2015-03-15  8:43     ` Eliad Peller
2015-03-15 12:08       ` Arnd Bergmann
2015-03-16  6:50         ` Kalle Valo
2015-03-16 15:15           ` Tony Lindgren
2015-03-20 14:00             ` Kalle Valo
2015-03-20 14:54               ` Tony Lindgren
2015-03-12 12:09 ` [PATCH v6 3/6] dt: bindings: add TI's wilink wireless device Eliad Peller
2015-03-12 12:09 ` [PATCH v6 4/6] wlcore: add device-tree support Eliad Peller
2015-03-12 12:09 ` [PATCH v6 5/6] ARM: dts: add wl12xx/wl18xx bindings Eliad Peller
2015-03-13  8:01   ` Javier Martinez Canillas
2015-03-13  8:17     ` Enric Balletbo Serra
     [not found]       ` <CAN692hmTGDDB3W5TtgfmQK5V9hUGpqVHpF=xK7F_v85cUjcRPw@mail.gmail.com>
2015-03-17  7:02         ` Eliad Peller
2015-03-13 15:27   ` Tony Lindgren
2015-03-15  8:55     ` Eliad Peller
2015-03-12 12:09 ` [PATCH v6 6/6] wlcore: remove wl12xx_platform_data Eliad Peller
2015-03-13 15:13   ` Tony Lindgren
2015-03-15  8:50     ` Eliad Peller
2015-03-15 12:08       ` Arnd Bergmann
2015-03-16 15:29         ` Tony Lindgren
2015-03-16 18:25           ` Sebastian Reichel
2015-03-16 18:24             ` Tony Lindgren
2015-03-17  6:58               ` Eliad Peller
2015-03-16 20:58           ` Pali Rohár
2015-03-16 21:01             ` Tony Lindgren
2015-03-16 21:15               ` Pali Rohár
2015-03-16 21:25                 ` Tony Lindgren
2015-03-13 16:11 ` [PATCH v6 0/6] wlcore: add device-tree support Sébastien Szymanski
2015-03-15  8:58   ` Eliad Peller

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1426162154-8716-1-git-send-email-eliad@wizery.com \
    --to=eliad@wizery.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).