From mboxrd@z Thu Jan 1 00:00:00 1970 From: wens@csie.org (Chen-Yu Tsai) Date: Sat, 14 Mar 2015 11:57:17 +0800 Subject: [PATCH v5 2/2] ARM: dts: sun9i: optimus: Switch to phy core regulator bindings for usb phys In-Reply-To: <1426305437-15208-1-git-send-email-wens@csie.org> References: <1426305437-15208-1-git-send-email-wens@csie.org> Message-ID: <1426305437-15208-3-git-send-email-wens@csie.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Since the phy core already supports specifying a regulator to handle during power up/down, it was decided to drop the regulator support in the sun9i usb phy driver. This patch switches the DT to the core bindings. This and the phy driver would be in the same release and should not be a problem as far as DT stability goes. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun9i-a80-optimus.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index e53f2656c2d0..c6ca116c59d2 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -203,7 +203,7 @@ }; &usbphy1 { - vbus-supply = <®_usb1_vbus>; + phy-supply = <®_usb1_vbus>; status = "okay"; }; @@ -212,6 +212,6 @@ }; &usbphy3 { - vbus-supply = <®_usb3_vbus>; + phy-supply = <®_usb3_vbus>; status = "okay"; }; -- 2.1.4