From: jun.nie@linaro.org (Jun Nie)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 07/10] dt/binding: Document ZTE zx296702 devicetree
Date: Sat, 14 Mar 2015 19:49:42 +0800 [thread overview]
Message-ID: <1426333785-3952-8-git-send-email-jun.nie@linaro.org> (raw)
In-Reply-To: <1426333785-3952-1-git-send-email-jun.nie@linaro.org>
Document the new compatible for zx296702 platform and
clock control.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
Documentation/devicetree/bindings/arm/zte.txt | 9 ++++++
.../devicetree/bindings/clock/zx296702-clk.txt | 35 ++++++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.txt | 1 +
3 files changed, 45 insertions(+)
create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
new file mode 100644
index 0000000..edd6791
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -0,0 +1,9 @@
+ZTE platforms device tree bindings
+---------------------------------------
+
+- ZX296702 board:
+ Required root node properties:
+ - compatible = "zte,zx296702-ad1", "zte,zx296702"
+
+Low power management required properties:
+ - compatible = "zte,aon-sysctrl"
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
new file mode 100644
index 0000000..9b527b5
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
@@ -0,0 +1,35 @@
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+ "zte,zx296702-topcrm":
+ zx296702 top clock selection, divider and gating
+
+ "zte,zx296702-lsp0crpm" or
+ "zte,zx296702-lsp1crpm":
+ zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/imx5-clock.h
+for the full list of i.MX5 clock IDs.
+
+
+clks: topcrm at 0x09800000 {
+ compatible = "zte,zx296702-topcrm";
+ reg = <0x09800000 0x1000>;
+ #clock-cells = <1>;
+};
+
+uart0: serial at 0x09405000 {
+ compatible = "zte,zx296702-uart";
+ reg = <0x09405000 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&clks ZX296702_UART0_PCLK>;
+ status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 389ca13..e4f96ad 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -197,3 +197,4 @@ xillybus Xillybus Ltd.
xlnx Xilinx
zyxel ZyXEL Communications Corp.
zarlink Zarlink Semiconductor
+zte ZTE Corp.
--
1.9.1
next prev parent reply other threads:[~2015-03-14 11:49 UTC|newest]
Thread overview: 27+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-14 11:49 [PATCH 00/10] ZTE platform basic support Jun Nie
2015-03-14 11:49 ` [PATCH 01/10] ARM: zx: add basic support of ZTE ZX296702 Jun Nie
2015-03-14 21:21 ` Arnd Bergmann
2015-03-14 11:49 ` [PATCH 02/10] ARM: zx: add low level debug support Jun Nie
2015-03-15 22:44 ` Matthias Brugger
2015-03-15 22:48 ` Russell King - ARM Linux
2015-03-16 2:37 ` Shawn Guo
2015-03-16 10:08 ` Arnd Bergmann
2015-03-14 11:49 ` [PATCH 03/10] MAINTAINERS: add entry for ZTE ARM architecture Jun Nie
2015-03-14 11:49 ` [PATCH 04/10] ARM: zx: add initial L2CC initialization Jun Nie
2015-03-14 21:22 ` Arnd Bergmann
2015-03-16 2:48 ` Shawn Guo
2015-03-16 3:04 ` Jisheng Zhang
2015-03-16 10:41 ` Russell King - ARM Linux
2015-03-14 11:49 ` [PATCH 05/10] ARM: zx: bring up the secondary core Jun Nie
2015-03-14 21:25 ` Arnd Bergmann
2015-03-16 7:23 ` Shawn Guo
2015-03-14 11:49 ` [PATCH 06/10] ARM: zx: add cpu hotplug support Jun Nie
2015-03-14 21:26 ` Arnd Bergmann
2015-03-14 11:49 ` Jun Nie [this message]
2015-03-14 11:49 ` [PATCH 08/10] ARM: dts: zx: add an initial dts for zx296702 Jun Nie
2015-03-14 21:30 ` Arnd Bergmann
2015-03-14 11:49 ` [PATCH 09/10] ARM: zx: Add basic defconfig support to ZX296702 Jun Nie
2015-03-15 13:15 ` Shawn Guo
2015-03-14 11:49 ` [PATCH 10/10] clk: zx: add zx296702 clock support Jun Nie
2015-03-14 21:33 ` Arnd Bergmann
2015-03-16 11:33 ` Russell King - ARM Linux
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426333785-3952-8-git-send-email-jun.nie@linaro.org \
--to=jun.nie@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).