[PATCH 2/2] ARM: dts: brcmstb: add IRQ0 controller

[computersforpeace@gmail.com (Brian Norris)]

This L2 controller handles multiplexing a few different interrupts. We
also need it for configuring the interrupt forwarding masks for the
UART.

With this, we can *now* boot BCM7445 to a prompt using the upstream
kernel + DTB.

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
---
 arch/arm/boot/dts/bcm7445.dtsi | 12 ++++++++++++
 1 file changed, 12 insertions(+)

diff --git a/arch/arm/boot/dts/bcm7445.dtsi b/arch/arm/boot/dts/bcm7445.dtsi
index b183dc99111a..9eaeac8dce1b 100644
--- a/arch/arm/boot/dts/bcm7445.dtsi
+++ b/arch/arm/boot/dts/bcm7445.dtsi
@@ -96,6 +96,18 @@
 				     "syscon";
 			reg = <0x452000 0x100>;
 		};
+
+		irq0_intc: interrupt-controller at f040a780 {
+			compatible = "brcm,bcm7120-l2-intc";
+			interrupt-parent = <&gic>;
+			#interrupt-cells = <1>;
+			reg = <0x40a780 0x8>;
+			interrupt-controller;
+			interrupts = <GIC_SPI 0x45 0x0>,
+				     <GIC_SPI 0x43 0x0>;
+			brcm,int-map-mask = <0x25c>, <0x7000000>;
+			brcm,int-fwd-mask = <0x70000>;
+		};
 	};
 
 	smpboot {
-- 
1.9.1