From: rnayak@codeaurora.org (Rajendra Nayak)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/6] clk: qcom: gdsc: Add GDSCs in msm8974 GCC
Date: Thu, 19 Mar 2015 13:32:23 +0530 [thread overview]
Message-ID: <1426752145-4365-5-git-send-email-rnayak@codeaurora.org> (raw)
In-Reply-To: <1426752145-4365-1-git-send-email-rnayak@codeaurora.org>
From: Stephen Boyd <sboyd@codeaurora.org>
Theres just one GDSC as part of the msm8974 GCC block.
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Rajendra Nayak <rnayak@codeaurora.org>
---
arch/arm/boot/dts/qcom-msm8974.dtsi | 1 +
drivers/clk/qcom/Kconfig | 1 +
drivers/clk/qcom/gcc-msm8974.c | 14 ++++++++++++++
include/dt-bindings/clock/qcom,gcc-msm8974.h | 3 +++
4 files changed, 19 insertions(+)
diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index e265ec1..12d17c2 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -179,6 +179,7 @@
compatible = "qcom,gcc-msm8974";
#clock-cells = <1>;
#reset-cells = <1>;
+ #power-domain-cells = <1>;
reg = <0xfc400000 0x4000>;
};
diff --git a/drivers/clk/qcom/Kconfig b/drivers/clk/qcom/Kconfig
index 2fe1b30..77568bd 100644
--- a/drivers/clk/qcom/Kconfig
+++ b/drivers/clk/qcom/Kconfig
@@ -88,6 +88,7 @@ config MSM_MMCC_8960
config MSM_GCC_8974
tristate "MSM8974 Global Clock Controller"
+ select QCOM_GDSC
depends on COMMON_CLK_QCOM
help
Support for the global clock controller on msm8974 devices.
diff --git a/drivers/clk/qcom/gcc-msm8974.c b/drivers/clk/qcom/gcc-msm8974.c
index a714114..c0f4e62 100644
--- a/drivers/clk/qcom/gcc-msm8974.c
+++ b/drivers/clk/qcom/gcc-msm8974.c
@@ -31,6 +31,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -2434,6 +2435,13 @@ static struct clk_branch gcc_usb_hsic_system_clk = {
},
};
+static struct gdsc usb_hs_hsic_gdsc = {
+ .gdscr = 0x404,
+ .pd = {
+ .name = "usb_hs_hsic",
+ },
+};
+
static struct clk_regmap *gcc_msm8974_clocks[] = {
[GPLL0] = &gpll0.clkr,
[GPLL0_VOTE] = &gpll0_vote,
@@ -2663,6 +2671,10 @@ static const struct qcom_reset_map gcc_msm8974_resets[] = {
[GCC_VENUS_RESTART] = { 0x1740 },
};
+static struct gdsc *gcc_msm8974_gdscs[] = {
+ [USB_HS_HSIC_GDSC] = &usb_hs_hsic_gdsc,
+};
+
static const struct regmap_config gcc_msm8974_regmap_config = {
.reg_bits = 32,
.reg_stride = 4,
@@ -2677,6 +2689,8 @@ static const struct qcom_cc_desc gcc_msm8974_desc = {
.num_clks = ARRAY_SIZE(gcc_msm8974_clocks),
.resets = gcc_msm8974_resets,
.num_resets = ARRAY_SIZE(gcc_msm8974_resets),
+ .gdscs = gcc_msm8974_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_msm8974_gdscs),
};
static const struct of_device_id gcc_msm8974_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8974.h b/include/dt-bindings/clock/qcom,gcc-msm8974.h
index 51e51c8..81d32f6 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8974.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8974.h
@@ -321,4 +321,7 @@
#define GCC_SDCC1_CDCCAL_SLEEP_CLK 304
#define GCC_SDCC1_CDCCAL_FF_CLK 305
+/* gdscs */
+#define USB_HS_HSIC_GDSC 0
+
#endif
--
QUALCOMM INDIA, on behalf of Qualcomm Innovation Center, Inc. is a member
of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2015-03-19 8:02 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-19 8:02 [PATCH v2 0/6] Add support for QCOM GDSCs Rajendra Nayak
2015-03-19 8:02 ` [PATCH v2 1/6] clk: qcom: Add support for GDSCs Rajendra Nayak
2015-03-19 8:02 ` [PATCH v2 2/6] clk: qcom: gdsc: Prepare common clk probe to register gdscs Rajendra Nayak
2015-03-19 10:46 ` Stanimir Varbanov
2015-03-19 11:01 ` Rajendra Nayak
2015-03-19 8:02 ` [PATCH v2 3/6] clk: qcom: gdsc: Add GDSCs in msm8916 GCC Rajendra Nayak
2015-03-19 8:02 ` Rajendra Nayak [this message]
2015-03-19 8:02 ` [PATCH v2 5/6] clk: qcom: gdsc: Add GDSCs in msm8974 MMCC Rajendra Nayak
2015-03-19 8:02 ` [PATCH v2 6/6] clk: qcom: gdsc: Add GDSCs in apq8084 GCC Rajendra Nayak
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1426752145-4365-5-git-send-email-rnayak@codeaurora.org \
--to=rnayak@codeaurora.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).