From: alex.bennee@linaro.org (Alex Bennée)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 06/10] KVM: arm64: guest debug, add SW break point support
Date: Tue, 31 Mar 2015 16:08:04 +0100 [thread overview]
Message-ID: <1427814488-28467-7-git-send-email-alex.bennee@linaro.org> (raw)
In-Reply-To: <1427814488-28467-1-git-send-email-alex.bennee@linaro.org>
This adds support for SW breakpoints inserted by userspace.
We do this by trapping all BKPT exceptions in the
hypervisor (MDCR_EL2_TDE). The kvm_debug_exit_arch carries the address
of the exception. If user-space doesn't know of the breakpoint then we
have a guest inserted breakpoint and the hypervisor needs to start again
and deliver the exception to guest.
Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>
---
v2
- update to use new exit struct
- tweak for C setup
- do our setup in debug_setup/clear code
- fixed up comments
diff --git a/Documentation/virtual/kvm/api.txt b/Documentation/virtual/kvm/api.txt
index 06c5064..17d4f9c 100644
--- a/Documentation/virtual/kvm/api.txt
+++ b/Documentation/virtual/kvm/api.txt
@@ -2626,7 +2626,7 @@ when running. Common control bits are:
The top 16 bits of the control field are architecture specific control
flags which can include the following:
- - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86]
+ - KVM_GUESTDBG_USE_SW_BP: using software breakpoints [x86, arm64]
- KVM_GUESTDBG_USE_HW_BP: using hardware breakpoints [x86, s390]
- KVM_GUESTDBG_INJECT_DB: inject DB type exception [x86]
- KVM_GUESTDBG_INJECT_BP: inject BP type exception [x86]
diff --git a/arch/arm/kvm/arm.c b/arch/arm/kvm/arm.c
index 7ea8b0e..d3bc8dc 100644
--- a/arch/arm/kvm/arm.c
+++ b/arch/arm/kvm/arm.c
@@ -304,7 +304,7 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
kvm_arm_set_running_vcpu(NULL);
}
-#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE)
+#define KVM_GUESTDBG_VALID (KVM_GUESTDBG_ENABLE|KVM_GUESTDBG_USE_SW_BP)
int kvm_arch_vcpu_ioctl_set_guest_debug(struct kvm_vcpu *vcpu,
struct kvm_guest_debug *dbg)
diff --git a/arch/arm64/kvm/debug.c b/arch/arm64/kvm/debug.c
index 8a29d0b..cff0475 100644
--- a/arch/arm64/kvm/debug.c
+++ b/arch/arm64/kvm/debug.c
@@ -45,11 +45,18 @@ void kvm_arch_setup_debug(struct kvm_vcpu *vcpu)
vcpu->arch.mdcr_el2 |= (MDCR_EL2_TPM | MDCR_EL2_TPMCR);
vcpu->arch.mdcr_el2 |= (MDCR_EL2_TDRA | MDCR_EL2_TDOSA);
+ /* Trap debug register access? */
if (!vcpu->arch.debug_flags & KVM_ARM64_DEBUG_DIRTY)
vcpu->arch.mdcr_el2 |= MDCR_EL2_TDA;
else
vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDA;
+ /* Trap breakpoints? */
+ if (vcpu->guest_debug & KVM_GUESTDBG_USE_SW_BP)
+ vcpu->arch.mdcr_el2 |= MDCR_EL2_TDE;
+ else
+ vcpu->arch.mdcr_el2 &= ~MDCR_EL2_TDE;
+
}
void kvm_arch_clear_debug(struct kvm_vcpu *vcpu)
diff --git a/arch/arm64/kvm/handle_exit.c b/arch/arm64/kvm/handle_exit.c
index 524fa25..ed1bbb4 100644
--- a/arch/arm64/kvm/handle_exit.c
+++ b/arch/arm64/kvm/handle_exit.c
@@ -82,6 +82,37 @@ static int kvm_handle_wfx(struct kvm_vcpu *vcpu, struct kvm_run *run)
return 1;
}
+/**
+ * kvm_handle_debug_exception - handle a debug exception instruction
+ *
+ * @vcpu: the vcpu pointer
+ * @run: access to the kvm_run structure for results
+ *
+ * We route all debug exceptions through the same handler as we
+ * just need to report the PC and the HSR values to userspace.
+ * Userspace may decide to re-inject the exception and deliver it to
+ * the guest if it wasn't for the host to deal with.
+ */
+static int kvm_handle_guest_debug(struct kvm_vcpu *vcpu, struct kvm_run *run)
+{
+ u32 hsr = kvm_vcpu_get_hsr(vcpu);
+
+ run->exit_reason = KVM_EXIT_DEBUG;
+ run->debug.arch.hsr = hsr;
+
+ switch (hsr >> ESR_ELx_EC_SHIFT) {
+ case ESR_ELx_EC_BKPT32:
+ case ESR_ELx_EC_BRK64:
+ run->debug.arch.pc = *vcpu_pc(vcpu);
+ break;
+ default:
+ kvm_err("%s: un-handled case hsr: %#08x\n",
+ __func__, (unsigned int) hsr);
+ break;
+ }
+ return 0;
+}
+
static exit_handle_fn arm_exit_handlers[] = {
[ESR_ELx_EC_WFx] = kvm_handle_wfx,
[ESR_ELx_EC_CP15_32] = kvm_handle_cp15_32,
@@ -96,6 +127,8 @@ static exit_handle_fn arm_exit_handlers[] = {
[ESR_ELx_EC_SYS64] = kvm_handle_sys_reg,
[ESR_ELx_EC_IABT_LOW] = kvm_handle_guest_abort,
[ESR_ELx_EC_DABT_LOW] = kvm_handle_guest_abort,
+ [ESR_ELx_EC_BKPT32] = kvm_handle_guest_debug,
+ [ESR_ELx_EC_BRK64] = kvm_handle_guest_debug,
};
static exit_handle_fn kvm_get_exit_handler(struct kvm_vcpu *vcpu)
--
2.3.4
next prev parent reply other threads:[~2015-03-31 15:08 UTC|newest]
Thread overview: 70+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-31 15:07 [PATCH v2 00/10] KVM Guest Debug support for arm64 Alex Bennée
2015-03-31 15:07 ` [PATCH v2 01/10] KVM: add commentary for kvm_debug_exit_arch struct Alex Bennée
2015-04-01 15:38 ` David Hildenbrand
2015-04-10 12:58 ` Andrew Jones
2015-04-13 10:57 ` Christoffer Dall
2015-03-31 15:08 ` [PATCH v2 02/10] KVM: define common __KVM_GUESTDBG_USE_SW/HW_BP values Alex Bennée
2015-04-10 12:59 ` Andrew Jones
2015-04-13 11:55 ` Christoffer Dall
2015-04-13 14:51 ` Alex Bennée
2015-04-13 15:07 ` Andrew Jones
2015-04-14 8:24 ` Christoffer Dall
2015-03-31 15:08 ` [PATCH v2 03/10] KVM: arm: guest debug, define API headers Alex Bennée
2015-04-01 15:46 ` David Hildenbrand
2015-04-01 16:01 ` Alex Bennée
2015-04-01 16:05 ` David Hildenbrand
2015-04-01 16:09 ` Peter Maydell
2015-04-10 13:05 ` Andrew Jones
2015-04-13 12:08 ` Christoffer Dall
2015-04-23 9:54 ` Alex Bennée
2015-03-31 15:08 ` [PATCH v2 04/10] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl Alex Bennée
2015-04-01 15:55 ` David Hildenbrand
2015-04-09 12:28 ` Andrew Jones
2015-04-09 14:19 ` Alex Bennée
2015-04-13 12:12 ` Christoffer Dall
2015-04-14 6:31 ` David Hildenbrand
2015-04-14 8:03 ` Alex Bennée
2015-03-31 15:08 ` [PATCH v2 05/10] KVM: arm: introduce kvm_arch_setup/clear_debug() Alex Bennée
2015-04-01 16:28 ` David Hildenbrand
2015-04-09 12:56 ` Andrew Jones
2015-04-09 14:18 ` Alex Bennée
2015-04-09 12:55 ` Andrew Jones
2015-04-13 14:36 ` Christoffer Dall
2015-04-13 14:48 ` Christoffer Dall
2015-04-13 15:29 ` Alex Bennée
2015-03-31 15:08 ` Alex Bennée [this message]
2015-04-02 12:52 ` [PATCH v2 06/10] KVM: arm64: guest debug, add SW break point support David Hildenbrand
2015-04-02 14:06 ` Alex Bennée
2015-04-10 13:09 ` Andrew Jones
2015-04-14 8:25 ` Christoffer Dall
2015-04-23 14:26 ` Alex Bennée
2015-04-27 20:04 ` Christoffer Dall
2015-04-27 21:57 ` Peter Maydell
2015-04-28 8:42 ` Alex Bennée
2015-04-28 9:34 ` Peter Maydell
2015-04-28 12:56 ` Christoffer Dall
2015-04-28 14:37 ` Alex Bennée
2015-04-29 8:10 ` Christoffer Dall
2015-04-29 9:18 ` Alex Bennée
2015-04-29 10:38 ` Christoffer Dall
2015-04-29 15:08 ` Alex Bennée
2015-04-29 19:20 ` Christoffer Dall
[not found] ` <CADt_bzh=zhSmoQnKxp5cUski3S=riYG5AnmCsm=qeTSjm=cprA@mail.gmail.com>
2015-04-22 9:46 ` Alex Bennée
2015-03-31 15:08 ` [PATCH v2 07/10] KVM: arm64: guest debug, add support for single-step Alex Bennée
2015-04-09 13:24 ` Andrew Jones
2015-04-09 14:16 ` Alex Bennée
2015-04-14 8:27 ` Christoffer Dall
2015-03-31 15:08 ` [PATCH v2 08/10] KVM: arm64: guest debug, HW assisted debug support Alex Bennée
2015-04-10 12:25 ` Andrew Jones
2015-04-13 8:00 ` Alex Bennée
2015-04-14 10:23 ` Christoffer Dall
2015-04-14 10:17 ` Christoffer Dall
2015-03-31 15:08 ` [PATCH v2 09/10] KVM: arm64: trap nested debug register access Alex Bennée
2015-04-10 12:38 ` Andrew Jones
2015-04-13 7:59 ` Alex Bennée
2015-04-14 10:27 ` Christoffer Dall
2015-04-14 10:30 ` Christoffer Dall
2015-03-31 15:08 ` [PATCH v2 10/10] KVM: arm64: add trace points for guest_debug debug Alex Bennée
2015-04-10 12:54 ` Andrew Jones
2015-04-13 7:57 ` Alex Bennée
2015-04-14 10:32 ` Christoffer Dall
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1427814488-28467-7-git-send-email-alex.bennee@linaro.org \
--to=alex.bennee@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).