From mboxrd@z Thu Jan 1 00:00:00 1970 From: vianney.leclement@essensium.com (Vianney le =?iso-8859-1?q?Cl=E9ment?=) Date: Wed, 1 Apr 2015 15:25:36 +0200 Subject: [PATCH] ARM: dts: imx6: Add Embest MarS Board In-Reply-To: References: <1427875809-10444-1-git-send-email-vianney.leclement@essensium.com> Message-ID: <1427894736.2449.2@mail.essensium.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org On Wed, Apr 1, 2015 at 1:39 , Fabio Estevam wrote: > On Wed, Apr 1, 2015 at 5:10 AM, Vianney le Cl?ment de Saint-Marcq > wrote: >> Add device tree for the Embest/Element 14 MarS Board [1], an i.MX6 >> Dual >> based development board. >> >> The e-MMC chip is disabled because initialization fails (error >> -110). >> A possible cause is described in [2]. >> >> [1] http://www.embest-tech.com/shop/star/marsboard.html >> [2] https://community.freescale.com/message/442168#442168 >> >> Signed-off-by: Vianney le Cl?ment de Saint-Marcq >> > > Couldn't this be combined with the existing > arch/arm/boot/dts/imx6dl-riotboard.dts? While both boards do indeed share a lot of the schematics, the marsboard has some differences, e.g., in pin configuration, that requires a separate dts. We could split common parts out in a new dtsi, but I am not sure it is worth the hassle. Regards, Vianney Vianney le Cl?ment de Saint-Marcq Embedded Software Developper ? +32 485 84 55 05 Essensium, Mind division ? www.mind.be GPG: 727B CFE9 355F 1B02 0820 EE1C 9042 3E07 A804 0316