linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: josh.wu@atmel.com (Josh Wu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3] media: atmel-isi: add runtime pm support
Date: Thu, 9 Apr 2015 17:01:47 +0800	[thread overview]
Message-ID: <1428570108-4961-3-git-send-email-josh.wu@atmel.com> (raw)
In-Reply-To: <1428570108-4961-1-git-send-email-josh.wu@atmel.com>

The runtime pm resume/suspend will enable/disable pclk (ISI peripheral
clock).
And we need to call runtime_pm_get_sync()/runtime_pm_put() when we need
access ISI registers.

In the meantime, as clock_start()/clock_stop() is used to control the
mclk not ISI peripheral clock. So move this to start[stop]_streaming()
function.

Signed-off-by: Josh Wu <josh.wu@atmel.com>
---

Changes in v2:
- merged v1 two patch into one.
- use runtime_pm_put() instead of runtime_pm_put_sync()
- enable peripheral clock before access ISI registers.

 drivers/media/platform/soc_camera/atmel-isi.c | 51 +++++++++++++++++++++++----
 1 file changed, 45 insertions(+), 6 deletions(-)

diff --git a/drivers/media/platform/soc_camera/atmel-isi.c b/drivers/media/platform/soc_camera/atmel-isi.c
index 31254b4..2b05f89 100644
--- a/drivers/media/platform/soc_camera/atmel-isi.c
+++ b/drivers/media/platform/soc_camera/atmel-isi.c
@@ -20,6 +20,7 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/platform_device.h>
+#include <linux/pm_runtime.h>
 #include <linux/slab.h>
 
 #include <media/atmel-isi.h>
@@ -384,6 +385,8 @@ static int start_streaming(struct vb2_queue *vq, unsigned int count)
 	struct atmel_isi *isi = ici->priv;
 	int ret;
 
+	pm_runtime_get_sync(ici->v4l2_dev.dev);
+
 	/* Reset ISI */
 	ret = atmel_isi_wait_status(isi, WAIT_ISI_RESET);
 	if (ret < 0) {
@@ -441,6 +444,8 @@ static void stop_streaming(struct vb2_queue *vq)
 	ret = atmel_isi_wait_status(isi, WAIT_ISI_DISABLE);
 	if (ret < 0)
 		dev_err(icd->parent, "Disable ISI timed out\n");
+
+	pm_runtime_put(ici->v4l2_dev.dev);
 }
 
 static struct vb2_ops isi_video_qops = {
@@ -509,7 +514,13 @@ static int isi_camera_set_fmt(struct soc_camera_device *icd,
 	if (mf.code != xlate->code)
 		return -EINVAL;
 
+	/* Enable PM and peripheral clock before operate isi registers */
+	pm_runtime_get_sync(ici->v4l2_dev.dev);
+
 	ret = configure_geometry(isi, pix->width, pix->height, xlate->code);
+
+	pm_runtime_put(ici->v4l2_dev.dev);
+
 	if (ret < 0)
 		return ret;
 
@@ -722,14 +733,9 @@ static int isi_camera_clock_start(struct soc_camera_host *ici)
 	struct atmel_isi *isi = ici->priv;
 	int ret;
 
-	ret = clk_prepare_enable(isi->pclk);
-	if (ret)
-		return ret;
-
 	if (!IS_ERR(isi->mck)) {
 		ret = clk_prepare_enable(isi->mck);
 		if (ret) {
-			clk_disable_unprepare(isi->pclk);
 			return ret;
 		}
 	}
@@ -744,7 +750,6 @@ static void isi_camera_clock_stop(struct soc_camera_host *ici)
 
 	if (!IS_ERR(isi->mck))
 		clk_disable_unprepare(isi->mck);
-	clk_disable_unprepare(isi->pclk);
 }
 
 static unsigned int isi_camera_poll(struct file *file, poll_table *pt)
@@ -841,8 +846,13 @@ static int isi_camera_set_bus_param(struct soc_camera_device *icd)
 
 	cfg1 |= ISI_CFG1_THMASK_BEATS_16;
 
+	/* Enable PM and peripheral clock before operate isi registers */
+	pm_runtime_get_sync(ici->v4l2_dev.dev);
+
 	isi_writel(isi, ISI_CFG1, cfg1);
 
+	pm_runtime_put(ici->v4l2_dev.dev);
+
 	return 0;
 }
 
@@ -1039,6 +1049,9 @@ static int atmel_isi_probe(struct platform_device *pdev)
 	soc_host->v4l2_dev.dev	= &pdev->dev;
 	soc_host->nr		= pdev->id;
 
+	pm_suspend_ignore_children(&pdev->dev, true);
+	pm_runtime_enable(&pdev->dev);
+
 	if (isi->pdata.asd_sizes) {
 		soc_host->asd = isi->pdata.asd;
 		soc_host->asd_sizes = isi->pdata.asd_sizes;
@@ -1052,6 +1065,7 @@ static int atmel_isi_probe(struct platform_device *pdev)
 	return 0;
 
 err_register_soc_camera_host:
+	pm_runtime_disable(&pdev->dev);
 err_req_irq:
 err_ioremap:
 	vb2_dma_contig_cleanup_ctx(isi->alloc_ctx);
@@ -1064,6 +1078,30 @@ err_alloc_ctx:
 	return ret;
 }
 
+static int atmel_isi_runtime_suspend(struct device *dev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(dev);
+	struct atmel_isi *isi = container_of(soc_host,
+					struct atmel_isi, soc_host);
+
+	clk_disable_unprepare(isi->pclk);
+
+	return 0;
+}
+static int atmel_isi_runtime_resume(struct device *dev)
+{
+	struct soc_camera_host *soc_host = to_soc_camera_host(dev);
+	struct atmel_isi *isi = container_of(soc_host,
+					struct atmel_isi, soc_host);
+
+	return clk_prepare_enable(isi->pclk);
+}
+
+static const struct dev_pm_ops atmel_isi_dev_pm_ops = {
+	SET_RUNTIME_PM_OPS(atmel_isi_runtime_suspend,
+				atmel_isi_runtime_resume, NULL)
+};
+
 static const struct of_device_id atmel_isi_of_match[] = {
 	{ .compatible = "atmel,at91sam9g45-isi" },
 	{ }
@@ -1075,6 +1113,7 @@ static struct platform_driver atmel_isi_driver = {
 	.driver		= {
 		.name = "atmel_isi",
 		.of_match_table = of_match_ptr(atmel_isi_of_match),
+		.pm	= &atmel_isi_dev_pm_ops,
 	},
 };
 
-- 
1.9.1

  parent reply	other threads:[~2015-04-09  9:01 UTC|newest]

Thread overview: 11+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-09  9:01 [PATCH v2 0/3] media: atmel-isi: rework on the clock part and add runtime pm support Josh Wu
2015-04-09  9:01 ` [PATCH v2 1/3] media: atmel-isi: remove the useless code which disable isi Josh Wu
2015-04-12 13:10   ` Laurent Pinchart
2015-04-13 10:17     ` Josh Wu
2015-05-11 20:16   ` Guennadi Liakhovetski
2015-05-12  3:00     ` Josh Wu
2015-05-25 17:05       ` Guennadi Liakhovetski
2015-04-09  9:01 ` Josh Wu [this message]
2015-04-09  9:01 ` [PATCH v2 3/3] media: atmel-isi: remove mck back compatiable code as it's not need Josh Wu
2015-04-12 13:08   ` Laurent Pinchart
2015-04-13 10:09     ` Josh Wu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1428570108-4961-3-git-send-email-josh.wu@atmel.com \
    --to=josh.wu@atmel.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).