[PATCH v2 3/6] clk: hi6220: Document devicetree bindings for hi6220 clock

[bintian.wang@huawei.com (Bintian Wang)]

Document DT files bindings for Hisilicon hi6220 clock.

Signed-off-by: Bintian Wang <bintian.wang@huawei.com>
Reviewed-by: Haojian Zhuang <haojian.zhuang@linaro.org>
---
 .../devicetree/bindings/clock/hi6220-clock.txt     | 34 ++++++++++++++++++++++
 1 file changed, 34 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/hi6220-clock.txt

diff --git a/Documentation/devicetree/bindings/clock/hi6220-clock.txt b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
new file mode 100644
index 0000000..83cc7c7
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/hi6220-clock.txt
@@ -0,0 +1,34 @@
+* Hisilicon Hi6220 Clock Controller
+
+Clock control registers reside in different Hi6220 system controllers,
+please refer the following document to know more about the binding rules
+for these system controllers:
+
+Documentation/devicetree/bindings/arm/hisilicon/hisilicon.txt
+
+Required Properties:
+
+- compatible: the compatible should be one of the following strings to
+	indicate the clock controller functionality.
+
+	- "hisilicon,aoctrl"
+	- "hisilicon,sysctrl"
+	- "hisilicon,mediactrl"
+	- "hisilicon,pmctrl"
+
+- reg: physical base address of the controller and length of memory mapped
+  region.
+
+- #clock-cells: should be 1.
+
+For example:
+	sys_ctrl: sys_ctrl {
+		compatible = "hisilicon,sysctrl", "syscon";
+		reg = <0x0 0xf7030000 0x0 0x2000>;
+		#clock-cells = <1>;
+	};
+
+Each clock is assigned an identifier and client nodes use this identifier
+to specify the clock which they consume.
+
+All these identifier could be found in <dt-bindings/clock/hi6220-clock.h>.
-- 
1.9.1