From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 17 Apr 2015 15:33:46 -0700 Subject: [PATCH 1/7] Documentation: DT: Add Broadcom BCM63138 PMB binding In-Reply-To: <1429310032-19402-1-git-send-email-f.fainelli@gmail.com> References: <1429310032-19402-1-git-send-email-f.fainelli@gmail.com> Message-ID: <1429310032-19402-2-git-send-email-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Add a Device Tree binding for the Broadcom BCM63138 Processor Monitor Bus, which is an internal bus used to access different power and reset signals within a BCM63138 System-on-a-Chip. Signed-off-by: Florian Fainelli --- .../devicetree/bindings/reset/brcm,bcm63138-pmb.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt diff --git a/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt new file mode 100644 index 000000000000..aa1eecd23046 --- /dev/null +++ b/Documentation/devicetree/bindings/reset/brcm,bcm63138-pmb.txt @@ -0,0 +1,19 @@ +Broadcom BCM63138 Processor Monitor Bus binding +=============================================== + +Please also refer to reset.txt in this directory for common reset +controller binding usage. + +Require properties: + +- compatible: must be "brcm,bcm63138-pmb" +- reg: base register address and size for this bus controller +- #reset-cells: must be 2 first cell is the internal bus number, and the third + cell is the address on this bus + +Example: + pmb0: reset-controller at 4800c0 { + compatible = "brcm,bcm63138-pmb"; + reg = <0x4800c0 0x10>; + #reset-cells = <2>; + }; -- 2.1.0