From mboxrd@z Thu Jan 1 00:00:00 1970 From: f.fainelli@gmail.com (Florian Fainelli) Date: Fri, 17 Apr 2015 15:33:49 -0700 Subject: [PATCH 4/7] ARM: dts: BCM63xx: Add SMP nodes and required properties In-Reply-To: <1429310032-19402-1-git-send-email-f.fainelli@gmail.com> References: <1429310032-19402-1-git-send-email-f.fainelli@gmail.com> Message-ID: <1429310032-19402-5-git-send-email-f.fainelli@gmail.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update bcm63138.dtsi with the following: - enable-method for both CPU nodes - brcm,bcm63138-bootlut node - resets properties to point to the correct PMB controller to release the secondary CPU from reset Signed-off-by: Florian Fainelli --- arch/arm/boot/dts/bcm63138.dtsi | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/arch/arm/boot/dts/bcm63138.dtsi b/arch/arm/boot/dts/bcm63138.dtsi index f5b5c528c26c..cdbaa14c872c 100644 --- a/arch/arm/boot/dts/bcm63138.dtsi +++ b/arch/arm/boot/dts/bcm63138.dtsi @@ -26,6 +26,7 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <0>; + enable-method = "brcm,bcm63138"; }; cpu at 1 { @@ -33,6 +34,8 @@ compatible = "arm,cortex-a9"; next-level-cache = <&L2>; reg = <1>; + enable-method = "brcm,bcm63138"; + resets = <&pmb0 0 4>; }; }; @@ -143,5 +146,10 @@ clock-names = "periph"; status = "disabled"; }; + + bootlut: bootlut at 8000 { + compatible = "brcm,bcm63138-bootlut"; + reg = <0x8000 0x50>; + }; }; }; -- 2.1.0