From: peter.griffin@linaro.org (Peter Griffin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors
Date: Mon, 20 Apr 2015 14:41:05 +0100 [thread overview]
Message-ID: <1429537265-22367-2-git-send-email-peter.griffin@linaro.org> (raw)
In-Reply-To: <1429537265-22367-1-git-send-email-peter.griffin@linaro.org>
Brian noticed while working on another SATA driver that uses libahci_platform,
an error in this driver; it tries to the the driver data for its
device, while libata also thinks it can set the driver data. See:
ahci_platform_init_host()
-> ata_host_alloc_pinfo()
-> ata_host_alloc()
-> dev_set_drvdata()
So instead of sticking the IP-specific platform data into drvdata, let's
use the plat_data variable that is reserved for this use.
Addtionally plat_data isn't set until ahci_platform_init_host() has been
called further down in probe(). So re-work the st_ahci_probe_resets and
st_ahci_deassert_resets functions to take ahci_host_priv *hpriv as a
parameter.
Signed-off-by: Peter Griffin <peter.griffin@linaro.org>
Suggested-by: Brian Norris <computersforpeace@gmail.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@gmail.com>
Cc: Maxime Coquelin <maxime.coquelin@st.com>
Cc: Patrice Chotard <patrice.chotard@st.com>
---
drivers/ata/ahci_st.c | 49 ++++++++++++++++++++++++-------------------------
1 file changed, 24 insertions(+), 25 deletions(-)
diff --git a/drivers/ata/ahci_st.c b/drivers/ata/ahci_st.c
index ea0ff00..8ff428f 100644
--- a/drivers/ata/ahci_st.c
+++ b/drivers/ata/ahci_st.c
@@ -37,7 +37,6 @@ struct st_ahci_drv_data {
struct reset_control *pwr;
struct reset_control *sw_rst;
struct reset_control *pwr_rst;
- struct ahci_host_priv *hpriv;
};
static void st_ahci_configure_oob(void __iomem *mmio)
@@ -55,9 +54,10 @@ static void st_ahci_configure_oob(void __iomem *mmio)
writel(new_val, mmio + ST_AHCI_OOBR);
}
-static int st_ahci_deassert_resets(struct device *dev)
+static int st_ahci_deassert_resets(struct ahci_host_priv *hpriv,
+ struct device *dev)
{
- struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
+ struct st_ahci_drv_data *drv_data = hpriv->plat_data;
int err;
if (drv_data->pwr) {
@@ -90,8 +90,8 @@ static int st_ahci_deassert_resets(struct device *dev)
static void st_ahci_host_stop(struct ata_host *host)
{
struct ahci_host_priv *hpriv = host->private_data;
+ struct st_ahci_drv_data *drv_data = hpriv->plat_data;
struct device *dev = host->dev;
- struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
int err;
if (drv_data->pwr) {
@@ -103,29 +103,30 @@ static void st_ahci_host_stop(struct ata_host *host)
ahci_platform_disable_resources(hpriv);
}
-static int st_ahci_probe_resets(struct platform_device *pdev)
+static int st_ahci_probe_resets(struct ahci_host_priv *hpriv,
+ struct device *dev)
{
- struct st_ahci_drv_data *drv_data = platform_get_drvdata(pdev);
+ struct st_ahci_drv_data *drv_data = hpriv->plat_data;
- drv_data->pwr = devm_reset_control_get(&pdev->dev, "pwr-dwn");
+ drv_data->pwr = devm_reset_control_get(dev, "pwr-dwn");
if (IS_ERR(drv_data->pwr)) {
- dev_info(&pdev->dev, "power reset control not defined\n");
+ dev_info(dev, "power reset control not defined\n");
drv_data->pwr = NULL;
}
- drv_data->sw_rst = devm_reset_control_get(&pdev->dev, "sw-rst");
+ drv_data->sw_rst = devm_reset_control_get(dev, "sw-rst");
if (IS_ERR(drv_data->sw_rst)) {
- dev_info(&pdev->dev, "soft reset control not defined\n");
+ dev_info(dev, "soft reset control not defined\n");
drv_data->sw_rst = NULL;
}
- drv_data->pwr_rst = devm_reset_control_get(&pdev->dev, "pwr-rst");
+ drv_data->pwr_rst = devm_reset_control_get(dev, "pwr-rst");
if (IS_ERR(drv_data->pwr_rst)) {
- dev_dbg(&pdev->dev, "power soft reset control not defined\n");
+ dev_dbg(dev, "power soft reset control not defined\n");
drv_data->pwr_rst = NULL;
}
- return st_ahci_deassert_resets(&pdev->dev);
+ return st_ahci_deassert_resets(hpriv, dev);
}
static struct ata_port_operations st_ahci_port_ops = {
@@ -154,15 +155,12 @@ static int st_ahci_probe(struct platform_device *pdev)
if (!drv_data)
return -ENOMEM;
- platform_set_drvdata(pdev, drv_data);
-
hpriv = ahci_platform_get_resources(pdev);
if (IS_ERR(hpriv))
return PTR_ERR(hpriv);
+ hpriv->plat_data = drv_data;
- drv_data->hpriv = hpriv;
-
- err = st_ahci_probe_resets(pdev);
+ err = st_ahci_probe_resets(hpriv, &pdev->dev);
if (err)
return err;
@@ -170,7 +168,7 @@ static int st_ahci_probe(struct platform_device *pdev)
if (err)
return err;
- st_ahci_configure_oob(drv_data->hpriv->mmio);
+ st_ahci_configure_oob(hpriv->mmio);
err = ahci_platform_init_host(pdev, hpriv, &st_ahci_port_info,
&ahci_platform_sht);
@@ -185,8 +183,9 @@ static int st_ahci_probe(struct platform_device *pdev)
#ifdef CONFIG_PM_SLEEP
static int st_ahci_suspend(struct device *dev)
{
- struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = drv_data->hpriv;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
+ struct st_ahci_drv_data *drv_data = hpriv->plat_data;
int err;
err = ahci_platform_suspend_host(dev);
@@ -208,21 +207,21 @@ static int st_ahci_suspend(struct device *dev)
static int st_ahci_resume(struct device *dev)
{
- struct st_ahci_drv_data *drv_data = dev_get_drvdata(dev);
- struct ahci_host_priv *hpriv = drv_data->hpriv;
+ struct ata_host *host = dev_get_drvdata(dev);
+ struct ahci_host_priv *hpriv = host->private_data;
int err;
err = ahci_platform_enable_resources(hpriv);
if (err)
return err;
- err = st_ahci_deassert_resets(dev);
+ err = st_ahci_deassert_resets(hpriv, dev);
if (err) {
ahci_platform_disable_resources(hpriv);
return err;
}
- st_ahci_configure_oob(drv_data->hpriv->mmio);
+ st_ahci_configure_oob(hpriv->mmio);
return ahci_platform_resume_host(dev);
}
--
1.9.1
next prev parent reply other threads:[~2015-04-20 13:41 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-20 13:41 [PATCH v2] ata: ahci_st: fixup layering violations / drvdata errors Peter Griffin
2015-04-20 13:41 ` Peter Griffin [this message]
2015-04-29 14:30 ` Maxime Coquelin
2015-04-23 1:18 ` Brian Norris
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1429537265-22367-2-git-send-email-peter.griffin@linaro.org \
--to=peter.griffin@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).