linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: tony@atomide.com (Tony Lindgren)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] gpio: omap: Allow building as a loadable module
Date: Thu, 23 Apr 2015 16:56:22 -0700	[thread overview]
Message-ID: <1429833382-28532-1-git-send-email-tony@atomide.com> (raw)

We currently get all kinds of errors building the omap gpio driver
as a module starting with:

undefined reference to `omap2_gpio_resume_after_idle'
undefined reference to `omap2_gpio_prepare_for_idle'
...

Let's fix the issue by adding inline functions to the header.
Note that we can now also remove the two unused functions for
omap_set_gpio_debounce and omap_set_gpio_debounce_time.

Then doing rmmod on the module produces further warnings
because of missing exit related functions. Let's add those.

And finally, we can make the Kconfig entry just a tristate
option that's selected for omaps.

Cc: Felipe Balbi <balbi@ti.com>
Cc: Javier Martinez Canillas <javier@dowhile0.org>
Cc: Grygorii Strashko <grygorii.strashko@linaro.org>
Cc: Kevin Hilman <khilman@deeprootsystems.com>
Cc: Nishanth Menon <nm@ti.com>
Cc: Santosh Shilimkar <ssantosh@kernel.org>
Signed-off-by: Tony Lindgren <tony@atomide.com>
---
 drivers/gpio/Kconfig                    |  2 +-
 drivers/gpio/gpio-omap.c                | 24 ++++++++++++++++++++++++
 include/linux/platform_data/gpio-omap.h | 12 ++++++++++--
 3 files changed, 35 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
index caefe80..ff7df95 100644
--- a/drivers/gpio/Kconfig
+++ b/drivers/gpio/Kconfig
@@ -308,7 +308,7 @@ config GPIO_OCTEON
 	  family of SOCs.
 
 config GPIO_OMAP
-	bool "TI OMAP GPIO support" if COMPILE_TEST && !ARCH_OMAP2PLUS
+	tristate "TI OMAP GPIO support" if ARCH_OMAP2PLUS || COMPILE_TEST
 	default y if ARCH_OMAP
 	depends on ARM
 	select GENERIC_IRQ_CHIP
diff --git a/drivers/gpio/gpio-omap.c b/drivers/gpio/gpio-omap.c
index b59c3ca..384a852 100644
--- a/drivers/gpio/gpio-omap.c
+++ b/drivers/gpio/gpio-omap.c
@@ -1202,6 +1202,17 @@ static int omap_gpio_probe(struct platform_device *pdev)
 	return 0;
 }
 
+static int omap_gpio_remove(struct platform_device *pdev)
+{
+	struct gpio_bank *bank = platform_get_drvdata(pdev);
+
+	list_del(&bank->node);
+	gpiochip_remove(&bank->chip);
+	pm_runtime_disable(bank->dev);
+
+	return 0;
+}
+
 #ifdef CONFIG_ARCH_OMAP2PLUS
 
 #if defined(CONFIG_PM)
@@ -1387,6 +1398,7 @@ static int omap_gpio_runtime_resume(struct device *dev)
 }
 #endif /* CONFIG_PM */
 
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
 void omap2_gpio_prepare_for_idle(int pwr_mode)
 {
 	struct gpio_bank *bank;
@@ -1412,6 +1424,7 @@ void omap2_gpio_resume_after_idle(void)
 		pm_runtime_get_sync(bank->dev);
 	}
 }
+#endif
 
 #if defined(CONFIG_PM)
 static void omap_gpio_init_context(struct gpio_bank *p)
@@ -1567,6 +1580,7 @@ MODULE_DEVICE_TABLE(of, omap_gpio_match);
 
 static struct platform_driver omap_gpio_driver = {
 	.probe		= omap_gpio_probe,
+	.remove		= omap_gpio_remove,
 	.driver		= {
 		.name	= "omap_gpio",
 		.pm	= &gpio_pm_ops,
@@ -1584,3 +1598,13 @@ static int __init omap_gpio_drv_reg(void)
 	return platform_driver_register(&omap_gpio_driver);
 }
 postcore_initcall(omap_gpio_drv_reg);
+
+static void __exit omap_gpio_exit(void)
+{
+	platform_driver_unregister(&omap_gpio_driver);
+}
+module_exit(omap_gpio_exit);
+
+MODULE_DESCRIPTION("omap gpio driver");
+MODULE_ALIAS("platform:gpio-omap");
+MODULE_LICENSE("GPL v2");
diff --git a/include/linux/platform_data/gpio-omap.h b/include/linux/platform_data/gpio-omap.h
index 5d50b25..cb26181 100644
--- a/include/linux/platform_data/gpio-omap.h
+++ b/include/linux/platform_data/gpio-omap.h
@@ -208,9 +208,17 @@ struct omap_gpio_platform_data {
 	int (*get_context_loss_count)(struct device *dev);
 };
 
+#if IS_BUILTIN(CONFIG_GPIO_OMAP)
 extern void omap2_gpio_prepare_for_idle(int off_mode);
 extern void omap2_gpio_resume_after_idle(void);
-extern void omap_set_gpio_debounce(int gpio, int enable);
-extern void omap_set_gpio_debounce_time(int gpio, int enable);
+#else
+static inline void omap2_gpio_prepare_for_idle(int off_mode)
+{
+}
+
+static inline void omap2_gpio_resume_after_idle(void)
+{
+}
+#endif
 
 #endif
-- 
2.1.4

             reply	other threads:[~2015-04-23 23:56 UTC|newest]

Thread overview: 6+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-23 23:56 Tony Lindgren [this message]
2015-04-24 14:59 ` [PATCH] gpio: omap: Allow building as a loadable module Grygorii.Strashko@linaro.org
2015-04-24 15:40 ` santosh shilimkar
2015-04-24 16:11 ` Felipe Balbi
2015-04-24 16:22   ` Tony Lindgren
2015-05-06 13:23 ` Linus Walleij

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1429833382-28532-1-git-send-email-tony@atomide.com \
    --to=tony@atomide.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).