linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: abrestic@chromium.org (Andrew Bresticker)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH V7 6/9] mailbox: Add NVIDIA Tegra XUSB mailbox binding
Date: Mon, 27 Apr 2015 15:37:19 -0700	[thread overview]
Message-ID: <1430174242-29465-7-git-send-email-abrestic@chromium.org> (raw)
In-Reply-To: <1430174242-29465-1-git-send-email-abrestic@chromium.org>

Add device-tree bindings for the Tegra XUSB mailbox which will be used
for communication between the Tegra xHCI controller's firmware and the
host processor.

Signed-off-by: Andrew Bresticker <abrestic@chromium.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Jassi Brar <jassisinghbrar@gmail.com>
---
Changes from v6:
 - Removed reg/interrupts properties.
No changes from v3/v4/v5.
Changes from v2:
 - Dropped channel specifier.
 - Added pointer to mailbox documentation.
Changes from v1:
 - Updated to use common mailbox bindings.
---
 .../bindings/mailbox/nvidia,tegra124-xusb-mbox.txt | 30 ++++++++++++++++++++++
 1 file changed, 30 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt

diff --git a/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
new file mode 100644
index 0000000..9d89afa
--- /dev/null
+++ b/Documentation/devicetree/bindings/mailbox/nvidia,tegra124-xusb-mbox.txt
@@ -0,0 +1,30 @@
+NVIDIA Tegra XUSB mailbox
+=========================
+
+The Tegra XUSB mailbox is used by the Tegra xHCI controller's firmware to
+communicate requests to the host and PHY drivers.
+
+Refer to ./mailbox.txt for generic information about mailbox device-tree
+bindings.
+
+Required properties:
+--------------------
+ - compatible: For Tegra124, must contain "nvidia,tegra124-xusb-mbox".
+   Otherwise, must contain '"nvidia,<chip>-xusb-mbox",
+   "nvidia,tegra124-xusb-mbox"' where <chip> is tegra132.
+ - #mbox-cells: Should be 0.  There is only one physical channel.
+
+Example:
+--------
+	mailbox {
+		compatible = "nvidia,tegra124-xusb-mbox";
+
+		#mbox-cells = <0>;
+	};
+
+	usb-host {
+		...
+		mboxes = <&xusb_mbox>;
+		mbox-names = "xusb";
+		...
+	};
-- 
2.2.0.rc0.207.ga3a616c

  parent reply	other threads:[~2015-04-27 22:37 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-27 22:37 [PATCH V7 0/9] Tegra xHCI support Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 1/9] xhci: Set shared HCD's hcd_priv in xhci_gen_setup Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 2/9] mailbox: Make struct mbox_controller's ops field const Andrew Bresticker
2015-04-28 16:49   ` Suman Anna
2015-04-27 22:37 ` [PATCH V7 3/9] mailbox: Fix up error handling in mbox_request_channel() Andrew Bresticker
2015-04-28 16:42   ` Suman Anna
2015-04-27 22:37 ` [PATCH V7 4/9] mfd: Add binding document for NVIDIA Tegra XUSB Andrew Bresticker
2015-04-29  9:25   ` Lee Jones
2015-04-29 17:02     ` Andrew Bresticker
2015-04-29 18:34       ` Lee Jones
2015-04-29 19:46         ` Andrew Bresticker
2015-04-30 10:06           ` Lee Jones
2015-04-30 16:28             ` Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 5/9] mfd: Add driver " Andrew Bresticker
2015-04-29  9:23   ` Lee Jones
2015-04-29 17:59     ` Andrew Bresticker
2015-04-29 18:30       ` Lee Jones
2015-04-27 22:37 ` Andrew Bresticker [this message]
2015-04-27 22:37 ` [PATCH V7 7/9] mailbox: Add NVIDIA Tegra XUSB mailbox driver Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 8/9] usb: Add NVIDIA Tegra xHCI controller binding Andrew Bresticker
2015-04-27 22:37 ` [PATCH V7 9/9] usb: xhci: Add NVIDIA Tegra xHCI host-controller driver Andrew Bresticker

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430174242-29465-7-git-send-email-abrestic@chromium.org \
    --to=abrestic@chromium.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).