linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: eddie.huang@mediatek.com (Eddie Huang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v6 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx.
Date: Tue, 28 Apr 2015 16:31:07 +0800	[thread overview]
Message-ID: <1430209869-6631-2-git-send-email-eddie.huang@mediatek.com> (raw)
In-Reply-To: <1430209869-6631-1-git-send-email-eddie.huang@mediatek.com>

From: Xudong Chen <xudong.chen@mediatek.com>

Add devicetree bindings for Mediatek Soc I2C driver.

Signed-off-by: Xudong Chen <xudong.chen@mediatek.com>
Signed-off-by: Eddie Huang <eddie.huang@mediatek.com>
---
 .../devicetree/bindings/i2c/i2c-mt6577.txt         | 41 ++++++++++++++++++++++
 1 file changed, 41 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/i2c/i2c-mt6577.txt

diff --git a/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
new file mode 100644
index 0000000..0ce6fa3
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-mt6577.txt
@@ -0,0 +1,41 @@
+* Mediatek's I2C controller
+
+The Mediatek's I2C controller is used to interface with I2C devices.
+
+Required properties:
+  - compatible: value should be either of the following.
+      (a) "mediatek,mt6577-i2c", for i2c compatible with mt6577 i2c.
+      (b) "mediatek,mt6589-i2c", for i2c compatible with mt6589 i2c.
+      (c) "mediatek,mt8127-i2c", for i2c compatible with mt8127 i2c.
+      (d) "mediatek,mt8135-i2c", for i2c compatible with mt8135 i2c.
+      (e) "mediatek,mt8173-i2c", for i2c compatible with mt8173 i2c.
+  - reg: physical base address of the controller and dma base, length of memory
+    mapped region.
+  - interrupts: interrupt number to the cpu.
+  - clock-div: the fixed value for frequency divider of clock source in i2c
+    module. Each IC may be different.
+  - clocks: clock name from clock manager
+  - clock-names: Must include "main" and "dma", if enable have-pmic need include
+    "pmic" extra.
+
+Optional properties:
+  - clock-frequency: Frequency in Hz of the bus when transfer, the default value
+    is 100000.
+  - mediatek,have-pmic: platform can control i2c form special pmic side.
+    Only mt6589 and mt8135 support this feature.
+  - mediatek,use-push-pull: IO config use push-pull mode.
+
+Example:
+
+	i2c0: i2c at 1100d000 {
+			compatible = "mediatek,mt6577-i2c";
+			reg = <0x1100d000 0x70>,
+			      <0x11000300 0x80>;
+			interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_LOW>;
+			clock-frequency = <400000>;
+			mediatek,have-pmic;
+			clock-div = <16>;
+			clocks = <&i2c0_ck>, <&ap_dma_ck>;
+			clock-names = "main", "dma";
+	};
+
-- 
1.8.1.1.dirty

  reply	other threads:[~2015-04-28  8:31 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-28  8:31 [PATCH v6 0/3] ARM: mediatek: Add driver for Mediatek I2C Eddie Huang
2015-04-28  8:31 ` Eddie Huang [this message]
2015-04-29  5:18   ` [PATCH v6 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx rajeev kumar
2015-04-28  8:31 ` [PATCH v6 2/3] I2C: mediatek: Add driver for MediaTek I2C controller Eddie Huang
2015-04-28  8:31 ` [PATCH v6 3/3] I2C: mediatek: Add driver for MediaTek MT8173 " Eddie Huang
2015-04-28  8:36   ` Marc Kleine-Budde
2015-04-28  8:44     ` Eddie Huang
2015-04-28 10:02 ` [PATCH v6 0/3] ARM: mediatek: Add driver for Mediatek I2C Lee Jones
2015-04-28 10:08   ` Jean Delvare
  -- strict thread matches above, loose matches on Subject: below --
2015-04-01  5:29 [PATCH v6 0/3] ARM: mediatek: Add driver for Mediatek I2C controller Eddie Huang
2015-04-01  5:29 ` [PATCH v6 1/3] dt-bindings: Add I2C bindings for mt65xx/mt81xx Eddie Huang

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430209869-6631-2-git-send-email-eddie.huang@mediatek.com \
    --to=eddie.huang@mediatek.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).