linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mathieu.poirier@linaro.org (Mathieu Poirier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 07/11] coresight-etm4x: Controls pertaining to the sequencer functions
Date: Wed, 29 Apr 2015 11:16:31 -0600	[thread overview]
Message-ID: <1430327795-10710-8-git-send-email-mathieu.poirier@linaro.org> (raw)
In-Reply-To: <1430327795-10710-1-git-send-email-mathieu.poirier@linaro.org>

From: Pratik Patel <pratikp@codeaurora.org>

Adding sysfs entries to access the sequencers related registers,
more specifically the sequencer state, the sequencer state
transition and the sequencer reset control registers.

Signed-off-by: Pratik Patel <pratikp@codeaurora.org>
Signed-off-by: Mathieu Poirier <mathieu.poirier@linaro.org>
---
 .../ABI/testing/sysfs-bus-coresight-devices-etm4x  |  25 ++++
 drivers/hwtracing/coresight/coresight-etm4x.c      | 129 +++++++++++++++++++++
 2 files changed, 154 insertions(+)

diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
index 8cdc4ad10bd6..44723f2e107e 100644
--- a/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-etm4x
@@ -191,3 +191,28 @@ Date:		April 2015
 KernelVersion:	4.01
 Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
 Description: 	(RW) Used to setup address range comparator values.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_idx
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Select which sequensor.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_state
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Use this to set, or read, the sequencer state.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_event
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Moves the sequencer state to a specific state.
+
+What:		/sys/bus/coresight/devices/<memory_map>.etm/seq_reset_event
+Date:		April 2015
+KernelVersion:	4.01
+Contact:	Mathieu Poirier <mathieu.poirier@linaro.org>
+Description: 	(RW) Moves the sequencer to state 0 when a programmed event
+		occurs.
diff --git a/drivers/hwtracing/coresight/coresight-etm4x.c b/drivers/hwtracing/coresight/coresight-etm4x.c
index 47cc68b8cc43..2ab64e2333e4 100644
--- a/drivers/hwtracing/coresight/coresight-etm4x.c
+++ b/drivers/hwtracing/coresight/coresight-etm4x.c
@@ -1442,6 +1442,131 @@ static ssize_t addr_context_store(struct device *dev,
 }
 static DEVICE_ATTR_RW(addr_context);
 
+static ssize_t seq_idx_show(struct device *dev,
+			    struct device_attribute *attr,
+			    char *buf)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	val = drvdata->seq_idx;
+	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
+}
+
+static ssize_t seq_idx_store(struct device *dev,
+			     struct device_attribute *attr,
+			     const char *buf, size_t size)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 16, &val))
+		return -EINVAL;
+	if (val >= drvdata->nrseqstate - 1)
+		return -EINVAL;
+
+	/*
+	 * Use spinlock to ensure index doesn't change while it gets
+	 * dereferenced multiple times within a spinlock block elsewhere.
+	 */
+	spin_lock(&drvdata->spinlock);
+	drvdata->seq_idx = val;
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(seq_idx);
+
+static ssize_t seq_state_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	val = drvdata->seq_state;
+	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
+}
+
+static ssize_t seq_state_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 16, &val))
+		return -EINVAL;
+	if (val >= drvdata->nrseqstate)
+		return -EINVAL;
+
+	drvdata->seq_state = val;
+	return size;
+}
+static DEVICE_ATTR_RW(seq_state);
+
+static ssize_t seq_event_show(struct device *dev,
+			      struct device_attribute *attr,
+			      char *buf)
+{
+	u8 idx;
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	spin_lock(&drvdata->spinlock);
+	idx = drvdata->seq_idx;
+	val = drvdata->seq_ctrl[idx];
+	spin_unlock(&drvdata->spinlock);
+	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
+}
+
+static ssize_t seq_event_store(struct device *dev,
+			       struct device_attribute *attr,
+			       const char *buf, size_t size)
+{
+	u8 idx;
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 16, &val))
+		return -EINVAL;
+
+	spin_lock(&drvdata->spinlock);
+	idx = drvdata->seq_idx;
+	/* RST, bits[7:0] */
+	drvdata->seq_ctrl[idx] = val & 0xFF;
+	spin_unlock(&drvdata->spinlock);
+	return size;
+}
+static DEVICE_ATTR_RW(seq_event);
+
+static ssize_t seq_reset_event_show(struct device *dev,
+				    struct device_attribute *attr,
+				    char *buf)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	val = drvdata->seq_rst;
+	return scnprintf(buf, PAGE_SIZE, "%#lx\n", val);
+}
+
+static ssize_t seq_reset_event_store(struct device *dev,
+				     struct device_attribute *attr,
+				     const char *buf, size_t size)
+{
+	unsigned long val;
+	struct etmv4_drvdata *drvdata = dev_get_drvdata(dev->parent);
+
+	if (kstrtoul(buf, 16, &val))
+		return -EINVAL;
+	if (!(drvdata->nrseqstate))
+		return -EINVAL;
+
+	drvdata->seq_rst = val & ETMv4_EVENT_MASK;
+	return size;
+}
+static DEVICE_ATTR_RW(seq_reset_event);
+
 static ssize_t status_show(struct device *dev,
 			   struct device_attribute *attr, char *buf)
 {
@@ -1614,6 +1739,10 @@ static struct attribute *coresight_etmv4_attrs[] = {
 	&dev_attr_addr_stop.attr,
 	&dev_attr_addr_ctxtype.attr,
 	&dev_attr_addr_context.attr,
+	&dev_attr_seq_idx.attr,
+	&dev_attr_seq_state.attr,
+	&dev_attr_seq_event.attr,
+	&dev_attr_seq_reset_event.attr,
 	&dev_attr_status.attr,
 	&dev_attr_mgmt.attr,
 	&dev_attr_trcidr.attr,
-- 
1.9.1

  parent reply	other threads:[~2015-04-29 17:16 UTC|newest]

Thread overview: 15+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-04-29 17:16 [PATCH v2 00/11] Support for coresight ETMv4 tracer Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 01/11] coresight-etm4x: Adding CoreSight ETM4x driver Mathieu Poirier
2015-04-30 21:29   ` Paul Bolle
2015-05-01 14:39     ` Mathieu Poirier
2015-05-01 18:28       ` Paul Bolle
2015-04-29 17:16 ` [PATCH v2 02/11] coresight-etm4x: Controls pertaining to tracer configuration Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 03/11] coresight-etm4x: Controls pertaining to the reset, mode, pe and events Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 04/11] coresight-etm4x: Controls pertaining to various configuration options Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 05/11] coresight-etm4x: Controls pertaining to the ViewInst register Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 06/11] coresight-etm4x: Controls pertaining to the address comparator functions Mathieu Poirier
2015-04-29 17:16 ` Mathieu Poirier [this message]
2015-04-29 17:16 ` [PATCH v2 08/11] coresight-etm4x: Controls pertaining to the counter functions Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 09/11] coresight-etm4x: Controls pertaining to the selection of resources Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 10/11] coresight-etm4x: Controls pertaining to the context ID functions Mathieu Poirier
2015-04-29 17:16 ` [PATCH v2 11/11] coresight-etm4x: Controls pertaining to the VM " Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1430327795-10710-8-git-send-email-mathieu.poirier@linaro.org \
    --to=mathieu.poirier@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).