From mboxrd@z Thu Jan 1 00:00:00 1970 From: stefan.wahren@i2se.com (Stefan Wahren) Date: Wed, 29 Apr 2015 22:32:22 +0000 Subject: [PATCH V2 1/6] DT: add binding for mxs power subsystem In-Reply-To: <1430346747-28728-1-git-send-email-stefan.wahren@i2se.com> References: <1430346747-28728-1-git-send-email-stefan.wahren@i2se.com> Message-ID: <1430346747-28728-2-git-send-email-stefan.wahren@i2se.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds the device tree bindings for the Freescale MXS on-chip power subsystem. Signed-off-by: Stefan Wahren --- .../devicetree/bindings/power/mxs_power.txt | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) create mode 100644 Documentation/devicetree/bindings/power/mxs_power.txt diff --git a/Documentation/devicetree/bindings/power/mxs_power.txt b/Documentation/devicetree/bindings/power/mxs_power.txt new file mode 100644 index 0000000..4003ef7 --- /dev/null +++ b/Documentation/devicetree/bindings/power/mxs_power.txt @@ -0,0 +1,17 @@ +Power subsystem for Freescale i.MX23/i.MX28 + +Required properties: +- compatible: Should be "fsl,-power". The supported SoCs include + imx23 and imx28. +- reg: Address and length of the register set for the power subsystem. + +Optional properties; +- interrupts: Interrupts used by the power subsystem + +Example for i.MX28: + + power: power at 80044000 { + compatible = "fsl,imx28-power", "syscon"; + reg = <0x80044000 0x2000>; + interrupts = <6>; + } -- 1.7.9.5