From: shenwei.wang@freescale.com (Shenwei Wang)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 01/18] ARM: imx: Add a parameter to mxc_timer_init
Date: Thu, 30 Apr 2015 09:44:16 -0500 [thread overview]
Message-ID: <1430405073-13106-2-git-send-email-shenwei.wang@freescale.com> (raw)
In-Reply-To: <1430405073-13106-1-git-send-email-shenwei.wang@freescale.com>
A parameter of integer type is added to the function mxc_timer_init,
so that a user could have a way to tell the timer driver the version
of the timer IP block.
Signed-off-by: Shenwei Wang <shenwei.wang@freescale.com>
---
arch/arm/mach-imx/time.c | 2 +-
drivers/clk/imx/clk-imx1.c | 3 ++-
drivers/clk/imx/clk-imx21.c | 3 ++-
drivers/clk/imx/clk-imx27.c | 3 ++-
drivers/clk/imx/clk-imx31.c | 3 ++-
drivers/clk/imx/clk-imx35.c | 5 +++--
drivers/clk/imx/clk.h | 2 +-
7 files changed, 13 insertions(+), 8 deletions(-)
diff --git a/arch/arm/mach-imx/time.c b/arch/arm/mach-imx/time.c
index b1698e1..eef6b66 100644
--- a/arch/arm/mach-imx/time.c
+++ b/arch/arm/mach-imx/time.c
@@ -346,7 +346,7 @@ static void __init _mxc_timer_init(int irq,
setup_irq(irq, &mxc_timer_irq);
}
-void __init mxc_timer_init(unsigned long pbase, int irq)
+void __init mxc_timer_init(unsigned long pbase, int irq, int ver)
{
struct clk *clk_per = clk_get_sys("imx-gpt.0", "per");
struct clk *clk_ipg = clk_get_sys("imx-gpt.0", "ipg");
diff --git a/drivers/clk/imx/clk-imx1.c b/drivers/clk/imx/clk-imx1.c
index c9812db..49534d8 100644
--- a/drivers/clk/imx/clk-imx1.c
+++ b/drivers/clk/imx/clk-imx1.c
@@ -102,7 +102,8 @@ int __init mx1_clocks_init(unsigned long fref)
clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ipg", "imx1-fb.0");
clk_register_clkdev(clk[IMX1_CLK_DUMMY], "ahb", "imx1-fb.0");
- mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT);
+ /*Timer version in MX1 is V0*/
+ mxc_timer_init(MX1_TIM1_BASE_ADDR, MX1_TIM1_INT, 0);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx21.c b/drivers/clk/imx/clk-imx21.c
index 0ca842c..08aa048 100644
--- a/drivers/clk/imx/clk-imx21.c
+++ b/drivers/clk/imx/clk-imx21.c
@@ -156,7 +156,8 @@ int __init mx21_clocks_init(unsigned long lref, unsigned long href)
clk_register_clkdev(clk[IMX21_CLK_I2C_GATE], NULL, "imx21-i2c.0");
clk_register_clkdev(clk[IMX21_CLK_OWIRE_GATE], NULL, "mxc_w1.0");
- mxc_timer_init(MX21_GPT1_BASE_ADDR, MX21_INT_GPT1);
+ /*Timer version in MX21 is v1*/
+ mxc_timer_init(MX21_GPT1_BASE_ADDR, MX21_INT_GPT1, 1);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx27.c b/drivers/clk/imx/clk-imx27.c
index df2dfc0..f00a7c0 100644
--- a/drivers/clk/imx/clk-imx27.c
+++ b/drivers/clk/imx/clk-imx27.c
@@ -233,7 +233,8 @@ int __init mx27_clocks_init(unsigned long fref)
clk_register_clkdev(clk[IMX27_CLK_EMMA_AHB_GATE], "ahb", "m2m-emmaprp.0");
clk_register_clkdev(clk[IMX27_CLK_EMMA_IPG_GATE], "ipg", "m2m-emmaprp.0");
- mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1);
+ /*Timer version in MX27 is v1*/
+ mxc_timer_init(MX27_GPT1_BASE_ADDR, MX27_INT_GPT1, 1);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx31.c b/drivers/clk/imx/clk-imx31.c
index a55290c..7c4a025 100644
--- a/drivers/clk/imx/clk-imx31.c
+++ b/drivers/clk/imx/clk-imx31.c
@@ -198,7 +198,8 @@ int __init mx31_clocks_init(unsigned long fref)
mx31_revision();
clk_disable_unprepare(clk[iim_gate]);
- mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT);
+ /*Timer version in MX31 is v2*/
+ mxc_timer_init(MX31_GPT1_BASE_ADDR, MX31_INT_GPT, 2);
return 0;
}
diff --git a/drivers/clk/imx/clk-imx35.c b/drivers/clk/imx/clk-imx35.c
index 133fda1..a796c1e 100644
--- a/drivers/clk/imx/clk-imx35.c
+++ b/drivers/clk/imx/clk-imx35.c
@@ -145,7 +145,7 @@ int __init mx35_clocks_init(void)
clk[esdhc3_div] = imx_clk_divider("esdhc3_div", "esdhc_sel", base + MX35_CCM_PDR3, 16, 6);
clk[spdif_sel] = imx_clk_mux("spdif_sel", base + MX35_CCM_PDR3, 22, 1, std_sel, ARRAY_SIZE(std_sel));
- clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
+ clk[spdif_div_pre] = imx_clk_divider("spdif_div_pre", "spdif_sel", base + MX35_CCM_PDR3, 29, 3); /* divide by 1 not allowed */
clk[spdif_div_post] = imx_clk_divider("spdif_div_post", "spdif_div_pre", base + MX35_CCM_PDR3, 23, 6);
clk[ssi_sel] = imx_clk_mux("ssi_sel", base + MX35_CCM_PDR2, 6, 1, std_sel, ARRAY_SIZE(std_sel));
@@ -296,7 +296,8 @@ int __init mx35_clocks_init(void)
#ifdef CONFIG_MXC_USE_EPIT
epit_timer_init(MX35_IO_ADDRESS(MX35_EPIT1_BASE_ADDR), MX35_INT_EPIT1);
#else
- mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT);
+ /*Timer version in MX35 is v2*/
+ mxc_timer_init(MX35_GPT1_BASE_ADDR, MX35_INT_GPT, 2);
#endif
return 0;
diff --git a/drivers/clk/imx/clk.h b/drivers/clk/imx/clk.h
index 6bae537..06da84a 100644
--- a/drivers/clk/imx/clk.h
+++ b/drivers/clk/imx/clk.h
@@ -11,7 +11,7 @@ extern spinlock_t imx_ccm_lock;
* mxc_timer_init() to initialize timer for non-DT boot. It can be removed
* when these legacy non-DT support is converted or dropped.
*/
-void mxc_timer_init(unsigned long pbase, int irq);
+void mxc_timer_init(unsigned long pbase, int irq, int);
void imx_check_clocks(struct clk *clks[], unsigned int count);
--
1.9.1
next prev parent reply other threads:[~2015-04-30 14:44 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-04-30 14:44 [PATCH 00/18] ARM: imx: make the imx timer driver implementation independent of SoCs Shenwei Wang
2015-04-30 14:44 ` Shenwei Wang [this message]
2015-05-14 8:02 ` [PATCH 01/18] ARM: imx: Add a parameter to mxc_timer_init Shawn Guo
2015-05-14 13:48 ` Shenwei Wang
2015-04-30 14:44 ` [PATCH 02/18] ARM: imx: Add the definitions for imx_timer and its versions Shenwei Wang
2015-05-15 1:18 ` Shawn Guo
2015-05-15 15:47 ` Shenwei Wang
2015-04-30 14:44 ` [PATCH 03/18] ARM: imx: Add an array of timer IP block versions Shenwei Wang
2015-05-15 1:33 ` Shawn Guo
2015-04-30 14:44 ` [PATCH 04/18] ARM: imx: Added one more parameter for mxc_clockevent_init Shenwei Wang
2015-04-30 14:44 ` [PATCH 05/18] ARM: imx: Added one more parameter for mxc_clocksource_init Shenwei Wang
2015-04-30 14:44 ` [PATCH 06/18] ARM: imx: New timer driver APIs based on IP block Shenwei Wang
2015-05-15 1:44 ` Shawn Guo
2015-04-30 14:44 ` [PATCH 07/18] ARM: imx: Initialize the imx_timer structure Shenwei Wang
2015-05-15 2:05 ` Shawn Guo
2015-04-30 14:44 ` [PATCH 08/18] ARM: imx: Reimplemented the _mxc_timer_init based on IP version Shenwei Wang
2015-04-30 14:44 ` [PATCH 09/18] ARM: imx: Removed the SoC relating codes in mxc_timer_interrupt Shenwei Wang
2015-04-30 14:44 ` [PATCH 10/18] ARM: imx: Removed the SoC relating codes in mxc_set_mode Shenwei Wang
2015-04-30 14:44 ` [PATCH 11/18] ARM: imx: Enabled the unused parameter Shenwei Wang
2015-04-30 14:44 ` [PATCH 12/18] ARM: imx: Remove one global variable in mxc_clocksource_init Shenwei Wang
2015-04-30 14:44 ` [PATCH 13/18] ARM: imx: Removed the unused functions and variables Shenwei Wang
2015-04-30 14:44 ` [PATCH 14/18] ARM: imx: Removed the global variable "timer_base" Shenwei Wang
2015-04-30 14:44 ` [PATCH 15/18] ARM: imx: Remove the SoC relating codes in mxc_clockevent_init Shenwei Wang
2015-04-30 14:44 ` [PATCH 16/18] ARM: imx: Move the variable clockevent_mode into mxc_set_mode Shenwei Wang
2015-04-30 14:44 ` [PATCH 17/18] ARM: imx: Codes clean up Shenwei Wang
2015-04-30 14:44 ` [PATCH 18/18] ARM: imx: Move time.c into drivers/clocksources Shenwei Wang
2015-05-15 7:54 ` [PATCH 00/18] ARM: imx: make the imx timer driver implementation independent of SoCs Shawn Guo
2015-05-15 15:39 ` Shenwei Wang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430405073-13106-2-git-send-email-shenwei.wang@freescale.com \
--to=shenwei.wang@freescale.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).