From: dinguyen@opensource.altera.com (dinguyen at opensource.altera.com)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCHv3 4/4] Documentation: DT bindings: document the clocks for Arria10
Date: Thu, 7 May 2015 10:12:03 -0500 [thread overview]
Message-ID: <1431011523-10049-5-git-send-email-dinguyen@opensource.altera.com> (raw)
In-Reply-To: <1431011523-10049-1-git-send-email-dinguyen@opensource.altera.com>
From: Dinh Nguyen <dinguyen@opensource.altera.com>
Update the bindings document for the clocks on the SoCFPGA Arria10 platform.
Also fix up a spelling error for the "altr,socfpga-perip-clk".
Signed-off-by: Dinh Nguyen <dinguyen@opensource.altera.com>
---
.../devicetree/bindings/clock/altr_socfpga.txt | 17 +++++++++++------
1 file changed, 11 insertions(+), 6 deletions(-)
diff --git a/Documentation/devicetree/bindings/clock/altr_socfpga.txt b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
index f72e80e..317e9cc 100644
--- a/Documentation/devicetree/bindings/clock/altr_socfpga.txt
+++ b/Documentation/devicetree/bindings/clock/altr_socfpga.txt
@@ -7,11 +7,15 @@ This binding uses the common clock binding[1].
Required properties:
- compatible : shall be one of the following:
"altr,socfpga-pll-clock" - for a PLL clock
- "altr,socfpga-perip-clock" - The peripheral clock divided from the
+ "altr,socfpga-perip-clk" - The peripheral clock divided from the
PLL clock.
"altr,socfpga-gate-clk" - Clocks that directly feed peripherals and
can get gated.
-
+ "altr,socfpga-a10-pll-clock" - for a PLL clock on the Arria10.
+ "altr,socfpga-a10-perip-clk" - The peripheral clock divided from the
+ PLL clock on the Arria10.
+ "altr,socfpga-a10-gate-clk" - Clocks that directly feed peripherals and
+ can be gated.
- reg : shall be the control register offset from CLOCK_MANAGER's base for the clock.
- clocks : shall be the input parent clock phandle for the clock. This is
either an oscillator or a pll output.
@@ -19,10 +23,11 @@ Required properties:
Optional properties:
- fixed-divider : If clocks have a fixed divider value, use this property.
-- clk-gate : For "socfpga-gate-clk", clk-gate contains the gating register
- and the bit index.
-- div-reg : For "socfpga-gate-clk" and "socfpga-periph-clock", div-reg contains
- the divider register, bit shift, and width.
+- clk-gate : For "socfpga-gate-clk" and "altr,socfpga-a10-gate-clk", clk-gate
+ contains the gating register and the bit index.
+- div-reg : For "socfpga-gate-clk", "socfpga-perip-clk",
+ "altr,socfpga-a10-gate-clk", and "altr,socfpga-a10-perip-clk", div-reg
+ contains the divider register, bit shift, and width.
- clk-phase : For the sdmmc_clk, contains the value of the clock phase that controls
the SDMMC CIU clock. The first value is the clk_sample(smpsel), and the second
value is the cclk_in_drv(drvsel). The clk-phase is used to enable the correct
--
2.2.1
prev parent reply other threads:[~2015-05-07 15:12 UTC|newest]
Thread overview: 10+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 15:11 [PATCHv3 0/4] clk: socfpga: Add clock driver for Arria10 dinguyen at opensource.altera.com
2015-05-07 15:12 ` [PATCHv3 1/4] clk: socfpga: update clk.h so for Arria10 platform to use dinguyen at opensource.altera.com
2015-05-07 15:12 ` [PATCHv3 2/4] clk: socfpga: add a clock driver for the Arria 10 platform dinguyen at opensource.altera.com
2015-05-16 0:52 ` Stephen Boyd
2015-05-19 16:29 ` Dinh Nguyen
2015-05-19 21:50 ` Stephen Boyd
2015-05-19 23:12 ` Dinh Nguyen
2015-05-20 0:22 ` Stephen Boyd
2015-05-07 15:12 ` [PATCHv3 3/4] ARM: socfpga: dts: add clocks to the Arria10 platform dinguyen at opensource.altera.com
2015-05-07 15:12 ` dinguyen at opensource.altera.com [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431011523-10049-5-git-send-email-dinguyen@opensource.altera.com \
--to=dinguyen@opensource.altera.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).