linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: mcoquelin.stm32@gmail.com (Maxime Coquelin)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v8 04/16] clocksource/drivers: Add ARM System timer driver
Date: Sat,  9 May 2015 09:53:46 +0200	[thread overview]
Message-ID: <1431158038-3813-5-git-send-email-mcoquelin.stm32@gmail.com> (raw)
In-Reply-To: <1431158038-3813-1-git-send-email-mcoquelin.stm32@gmail.com>

This patch adds clocksource support for ARMv7-M's System timer,
also known as SysTick.

Tested-by: Chanwoo Choi <cw00.choi@samsung.com>
Acked-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
---
 drivers/clocksource/Kconfig          |  7 ++++
 drivers/clocksource/Makefile         |  1 +
 drivers/clocksource/armv7m_systick.c | 79 ++++++++++++++++++++++++++++++++++++
 3 files changed, 87 insertions(+)
 create mode 100644 drivers/clocksource/armv7m_systick.c

diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 51d7865f..bf9364c 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -139,6 +139,13 @@ config CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
 	help
 	 Use ARM global timer clock source as sched_clock
 
+config ARMV7M_SYSTICK
+	bool
+	select CLKSRC_OF if OF
+	select CLKSRC_MMIO
+	help
+	  This options enables support for the ARMv7M system timer unit
+
 config ATMEL_PIT
 	select CLKSRC_OF if OF
 	def_bool SOC_AT91SAM9 || SOC_SAMA5
diff --git a/drivers/clocksource/Makefile b/drivers/clocksource/Makefile
index 5b85f6a..d510c54 100644
--- a/drivers/clocksource/Makefile
+++ b/drivers/clocksource/Makefile
@@ -45,6 +45,7 @@ obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
 
 obj-$(CONFIG_ARM_ARCH_TIMER)		+= arm_arch_timer.o
 obj-$(CONFIG_ARM_GLOBAL_TIMER)		+= arm_global_timer.o
+obj-$(CONFIG_ARMV7M_SYSTICK)		+= armv7m_systick.o
 obj-$(CONFIG_CLKSRC_METAG_GENERIC)	+= metag_generic.o
 obj-$(CONFIG_ARCH_HAS_TICK_BROADCAST)	+= dummy_timer.o
 obj-$(CONFIG_ARCH_KEYSTONE)		+= timer-keystone.o
diff --git a/drivers/clocksource/armv7m_systick.c b/drivers/clocksource/armv7m_systick.c
new file mode 100644
index 0000000..addfd2c
--- /dev/null
+++ b/drivers/clocksource/armv7m_systick.c
@@ -0,0 +1,79 @@
+/*
+ * Copyright (C) Maxime Coquelin 2015
+ * Author:  Maxime Coquelin <mcoquelin.stm32@gmail.com>
+ * License terms:  GNU General Public License (GPL), version 2
+ */
+
+#include <linux/kernel.h>
+#include <linux/clocksource.h>
+#include <linux/clockchips.h>
+#include <linux/of.h>
+#include <linux/of_address.h>
+#include <linux/clk.h>
+#include <linux/bitops.h>
+
+#define SYST_CSR	0x00
+#define SYST_RVR	0x04
+#define SYST_CVR	0x08
+#define SYST_CALIB	0x0c
+
+#define SYST_CSR_ENABLE BIT(0)
+
+#define SYSTICK_LOAD_RELOAD_MASK 0x00FFFFFF
+
+static void __init system_timer_of_register(struct device_node *np)
+{
+	struct clk *clk = NULL;
+	void __iomem *base;
+	u32 rate;
+	int ret;
+
+	base = of_iomap(np, 0);
+	if (!base) {
+		pr_warn("system-timer: invalid base address\n");
+		return;
+	}
+
+	ret = of_property_read_u32(np, "clock-frequency", &rate);
+	if (ret) {
+		clk = of_clk_get(np, 0);
+		if (IS_ERR(clk))
+			goto out_unmap;
+
+		ret = clk_prepare_enable(clk);
+		if (ret)
+			goto out_clk_put;
+
+		rate = clk_get_rate(clk);
+		if (!rate)
+			goto out_clk_disable;
+	}
+
+	writel_relaxed(SYSTICK_LOAD_RELOAD_MASK, base + SYST_RVR);
+	writel_relaxed(SYST_CSR_ENABLE, base + SYST_CSR);
+
+	ret = clocksource_mmio_init(base + SYST_CVR, "arm_system_timer", rate,
+			200, 24, clocksource_mmio_readl_down);
+	if (ret) {
+		pr_err("failed to init clocksource (%d)\n", ret);
+		if (clk)
+			goto out_clk_disable;
+		else
+			goto out_unmap;
+	}
+
+	pr_info("ARM System timer initialized as clocksource\n");
+
+	return;
+
+out_clk_disable:
+	clk_disable_unprepare(clk);
+out_clk_put:
+	clk_put(clk);
+out_unmap:
+	iounmap(base);
+	pr_warn("ARM System timer register failed (%d)\n", ret);
+}
+
+CLOCKSOURCE_OF_DECLARE(arm_systick, "arm,armv7m-systick",
+			system_timer_of_register);
-- 
1.9.1

  parent reply	other threads:[~2015-05-09  7:53 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-09  7:53 [PATCH v8 00/16] Add support to STMicroelectronics STM32 family Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 01/16] scripts: link-vmlinux: Don't pass page offset to kallsyms if XIP Kernel Maxime Coquelin
2015-05-18 11:47   ` Maxime Coquelin
2015-05-20 23:04     ` Andreas Färber
2015-05-21  5:40       ` Michal Marek
2015-05-21  7:42         ` Maxime Coquelin
2015-05-22 20:20       ` Andreas Färber
2015-05-09  7:53 ` [PATCH v8 02/16] ARM: ARMv7-M: Enlarge vector table up to 256 entries Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 03/16] dt-bindings: Document the ARM System timer bindings Maxime Coquelin
2015-05-09  7:53 ` Maxime Coquelin [this message]
2015-05-18 11:55   ` [PATCH v8 04/16] clocksource/drivers: Add ARM System timer driver Maxime Coquelin
2015-05-18 12:49     ` Daniel Lezcano
2015-05-18 12:57       ` Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 05/16] dt-bindings: mfd: Add STM32F4 RCC numeric constants into DT include file Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 06/16] dt-bindings: Document the STM32 reset bindings Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 07/16] drivers: reset: Add STM32 reset driver Maxime Coquelin
2015-05-20 23:45   ` Andreas Färber
2015-05-21  7:46     ` Maxime Coquelin
2015-05-21 17:58       ` Andreas Färber
2015-05-21 19:57         ` Maxime Coquelin
2015-05-21 22:01           ` Andreas Färber
2015-05-22 14:04             ` Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 08/16] dt-bindings: Document the STM32 timer bindings Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 09/16] clockevents/drivers: Add STM32 Timer driver Maxime Coquelin
2015-05-18 12:59   ` Maxime Coquelin
2015-05-18 13:10   ` Daniel Lezcano
2015-05-18 14:03     ` Maxime Coquelin
2015-05-19  8:16       ` Daniel Lezcano
2015-05-19  8:55         ` Maxime Coquelin
2015-05-19  9:06           ` Daniel Lezcano
2015-05-19  9:44             ` Maxime Coquelin
2015-05-19  9:59               ` Daniel Lezcano
2015-05-19 10:02                 ` Maxime Coquelin
2015-05-19 10:55                   ` Arnd Bergmann
2015-05-19 13:42                     ` Maxime Coquelin
2015-05-19 13:49                       ` Daniel Lezcano
2015-05-19 14:05                         ` Arnd Bergmann
2015-05-19 14:41                         ` Maxime Coquelin
2015-05-19 14:50                           ` Russell King - ARM Linux
2015-05-19 15:34                             ` Maxime Coquelin
2015-05-19 15:03                           ` Daniel Lezcano
2015-05-19 12:56                   ` Thomas Gleixner
2015-05-19 13:00                     ` Russell King - ARM Linux
2015-05-19 13:17                       ` Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 10/16] dt-bindings: Document the STM32 USART bindings Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 11/16] serial: stm32-usart: Add STM32 USART Driver Maxime Coquelin
2015-05-09 10:07   ` Andy Shevchenko
2015-05-18 13:05   ` Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 12/16] ARM: Add STM32 family machine Maxime Coquelin
2015-05-15 19:57   ` Arnd Bergmann
2015-05-09  7:53 ` [PATCH v8 13/16] ARM: dts: Add ARM System timer as clocksource in armv7m Maxime Coquelin
2015-05-15 19:59   ` Arnd Bergmann
2015-05-09  7:53 ` [PATCH v8 14/16] ARM: dts: Introduce STM32F429 MCU Maxime Coquelin
2015-05-12 21:21   ` Arnd Bergmann
2015-05-13 11:45     ` Maxime Coquelin
2015-05-13 12:58       ` Daniel Thompson
2015-05-13 13:27         ` Arnd Bergmann
2015-05-13 15:20           ` Daniel Thompson
2015-05-13 15:28             ` Arnd Bergmann
2015-05-13 16:29               ` Maxime Coquelin
2015-05-13 16:37                 ` Arnd Bergmann
2015-05-13 16:54                   ` Maxime Coquelin
2015-05-13 19:11                     ` Arnd Bergmann
2015-05-20 16:17                       ` Maxime Coquelin
2015-05-21 18:51                         ` Maxime Ripard
2015-05-21 20:10                           ` Maxime Coquelin
2015-05-23  8:28                             ` Maxime Ripard
2015-05-26  9:25                               ` Maxime Coquelin
2015-05-22  9:06                         ` Philipp Zabel
2015-05-22  9:18                           ` Maxime Ripard
2015-05-22 10:07                             ` Philipp Zabel
2015-05-22 12:32                               ` Maxime Coquelin
2015-05-22 12:43                                 ` Daniel Thompson
2015-05-22 13:09                                 ` Andreas Färber
2015-05-22 13:57                                   ` Maxime Coquelin
2015-05-22 14:06                                     ` Andreas Färber
2015-05-22 14:14                                     ` Daniel Thompson
2015-05-23  8:18                               ` Maxime Ripard
2015-05-22  9:41                           ` Maxime Coquelin
2015-05-13 19:29                     ` Daniel Thompson
2015-05-13 19:37                       ` Arnd Bergmann
2015-05-14 16:34                         ` Maxime Coquelin
2015-05-14 19:38                           ` Daniel Thompson
2015-05-18 12:21                     ` Maxime Coquelin
2015-05-09  7:53 ` [PATCH v8 15/16] ARM: configs: Add STM32 defconfig Maxime Coquelin
2015-05-15 20:03   ` Arnd Bergmann
2015-05-09  7:53 ` [PATCH v8 16/16] MAINTAINERS: Add entry for STM32 MCUs Maxime Coquelin
2015-05-15 19:58   ` Arnd Bergmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1431158038-3813-5-git-send-email-mcoquelin.stm32@gmail.com \
    --to=mcoquelin.stm32@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).