From mboxrd@z Thu Jan 1 00:00:00 1970 From: lho@apm.com (Loc Ho) Date: Thu, 14 May 2015 11:05:45 -0600 Subject: [PATCH v9 3/5] Documentation: Add documentation for the APM X-Gene SoC EDAC DTS binding In-Reply-To: <1431623147-4950-3-git-send-email-lho@apm.com> References: <1431623147-4950-1-git-send-email-lho@apm.com> <1431623147-4950-2-git-send-email-lho@apm.com> <1431623147-4950-3-git-send-email-lho@apm.com> Message-ID: <1431623147-4950-4-git-send-email-lho@apm.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org This patch adds documentation for the APM X-Gene SoC EDAC DTS binding. Signed-off-by: Loc Ho --- .../devicetree/bindings/edac/apm-xgene-edac.txt | 74 ++++++++++++++++++++ 1 files changed, 74 insertions(+), 0 deletions(-) create mode 100644 Documentation/devicetree/bindings/edac/apm-xgene-edac.txt diff --git a/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt new file mode 100644 index 0000000..bd42c53 --- /dev/null +++ b/Documentation/devicetree/bindings/edac/apm-xgene-edac.txt @@ -0,0 +1,74 @@ +* APM X-Gene SoC EDAC node + +EDAC node is defined to describe on-chip error detection and correction. +The follow error types are supported: + + memory controller - Memory controller + PMD (L1/L2) - Processor module unit (PMD) L1/L2 cache + +The following section describes the EDAC DT node binding. + +Required properties: +- compatible : Shall be "apm,xgene-edac". +- reg : First resource shall be the CPU bus (PCP) resource. +- interrupts : Interrupt-specifier for MCU, PMD, L3, or SoC error + IRQ(s). + +Required properties for memory controller subnode: +- compatible : Shall be "apm,xgene-edac-mc". +- reg : First resource shall be the memory controller unit + (MCU) resource. +- regmap-csw : Regmap of the CPU switch fabric (CSW) resource. +- regmap-mcba : Regmap of the MCB-A (memory bridge) resource. +- regmap-mcbb : Regmap of the MCB-B (memory bridge) resource. + +Required properties for PMD subnode: +- compatible : Shall be "apm,xgene-edac-pmd". +- reg : First resource shall be the PMD resource. +- regmap-efuse : Regmap of the PMD efuse resource. + +Example: + csw: csw at 7e200000 { + compatible = "syscon"; + reg = <0x0 0x7e200000 0x0 0x1000>; + }; + + mcba: mcba at 7e700000 { + compatible = "syscon"; + reg = <0x0 0x7e700000 0x0 0x1000>; + }; + + mcbb: mcbb at 7e720000 { + compatible = "syscon"; + reg = <0x0 0x7e720000 0x0 0x1000>; + }; + + efuse: efuse at 1054a000 { + compatible = "syscon"; + reg = <0x0 0x1054a000 0x0 0x20>; + }; + + edac: edac at 78800000 { + compatible = "apm,xgene-edac"; + #address-cells = <2>; + #size-cells = <2>; + reg = <0x0 0x78800000 0x0 0x100>; + interrupts = <0x0 0x20 0x4>, + <0x0 0x21 0x4>, + <0x0 0x27 0x4>; + + edacmc0: edacmc0 at 7e800000 { + compatible = "apm,xgene-edac-mc"; + regmap-csw = <&csw>; + regmap-mcba = <&mcba>; + regmap-mcbb = <&mcbb>; + reg = <0x0 0x7e800000 0x0 0x1000>; + }; + + edacpmd0: edacpmd0 at 7c000000 { + compatible = "apm,xgene-edac-pmd"; + regmap-efuse = <&efuse>; + reg = <0x0 0x7c000000 0x0 0x200000>; + }; + + }; -- 1.7.1