From: tremyfr@gmail.com (Philippe Reynes)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/2] rtc: mxc: add support of device tree
Date: Sat, 16 May 2015 00:35:30 +0200 [thread overview]
Message-ID: <1431729330-7625-3-git-send-email-tremyfr@gmail.com> (raw)
In-Reply-To: <1431729330-7625-1-git-send-email-tremyfr@gmail.com>
Signed-off-by: Philippe Reynes <tremyfr@gmail.com>
---
Documentation/devicetree/bindings/rtc/rtc-mxc.txt | 27 +++++++++++++++++++++
drivers/rtc/rtc-mxc.c | 22 ++++++++++++++++-
2 files changed, 48 insertions(+), 1 deletions(-)
create mode 100644 Documentation/devicetree/bindings/rtc/rtc-mxc.txt
diff --git a/Documentation/devicetree/bindings/rtc/rtc-mxc.txt b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
new file mode 100644
index 0000000..5505493
--- /dev/null
+++ b/Documentation/devicetree/bindings/rtc/rtc-mxc.txt
@@ -0,0 +1,27 @@
+* Real Time Clock of the i.MX SoCs
+
+RTC controller for the i.MX SoCs
+
+Required properties:
+- compatible: Should be "fsl,imx1-rtc" or "fsl,imx21-rtc".
+- reg: physical base address of the controller and length of memory mapped
+ region.
+- interrupts: IRQ line for the RTC.
+- clocks: should contain two entries:
+ * one for the input reference
+ * one for the the SoC RTC
+- clock-names: should contain:
+ * "rtc" for the input reference clock
+ * "ipg" for the SoC RTC clock
+
+Example:
+
+rtc at 10007000 {
+ compatible = "fsl,imx21-rtc";
+ reg = <0x10007000 0x1000>;
+ interrupts = <22>;
+ clocks = <&clks IMX27_CLK_CKIL>,
+ <&clks IMX27_CLK_RTC_IPG_GATE>;
+ clock-names = "rtc, "ipg";
+ status = "disabled";
+};
diff --git a/drivers/rtc/rtc-mxc.c b/drivers/rtc/rtc-mxc.c
index e916a91..df6483d 100644
--- a/drivers/rtc/rtc-mxc.c
+++ b/drivers/rtc/rtc-mxc.c
@@ -16,6 +16,8 @@
#include <linux/interrupt.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#define RTC_INPUT_CLK_32768HZ (0x00 << 5)
#define RTC_INPUT_CLK_32000HZ (0x01 << 5)
@@ -98,6 +100,15 @@ static struct platform_device_id imx_rtc_devtype[] = {
};
MODULE_DEVICE_TABLE(platform, imx_rtc_devtype);
+#ifdef CONFIG_OF
+static const struct of_device_id imx_rtc_dt_ids[] = {
+ { .compatible = "fsl,imx1-rtc", .data = &imx_rtc_devtype[IMX1_RTC] },
+ { .compatible = "fsl,imx21-rtc", .data = &imx_rtc_devtype[IMX21_RTC] },
+ {}
+};
+MODULE_DEVICE_TABLE(of, imx_rtc_dt_ids);
+#endif
+
static inline int is_imx1_rtc(struct rtc_plat_data *data)
{
return data->devtype == IMX1_RTC;
@@ -362,12 +373,20 @@ static int mxc_rtc_probe(struct platform_device *pdev)
u32 reg;
unsigned long rate;
int ret;
+ const struct of_device_id *of_id;
pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
if (!pdata)
return -ENOMEM;
- pdata->devtype = pdev->id_entry->driver_data;
+ of_id = of_match_device(imx_rtc_dt_ids, &pdev->dev);
+ if (of_id) {
+ struct platform_device_id *id_entry;
+
+ id_entry = (struct platform_device_id *)of_id->data;
+ pdata->devtype = id_entry->driver_data;
+ } else
+ pdata->devtype = pdev->id_entry->driver_data;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
pdata->ioaddr = devm_ioremap_resource(&pdev->dev, res);
@@ -481,6 +500,7 @@ static SIMPLE_DEV_PM_OPS(mxc_rtc_pm_ops, mxc_rtc_suspend, mxc_rtc_resume);
static struct platform_driver mxc_rtc_driver = {
.driver = {
.name = "mxc_rtc",
+ .of_match_table = of_match_ptr(imx_rtc_dt_ids),
.pm = &mxc_rtc_pm_ops,
},
.id_table = imx_rtc_devtype,
--
1.7.4.4
next prev parent reply other threads:[~2015-05-15 22:35 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-15 22:35 [PATCH 0/2] add dt support for mxc rtc Philippe Reynes
2015-05-15 22:35 ` [PATCH 1/2] rtc: mxc: add a second clock Philippe Reynes
2015-05-18 11:27 ` Enrico Weigelt, metux IT consult
2015-05-18 21:57 ` Philippe Reynes
2015-05-19 5:27 ` Shawn Guo
2015-05-28 11:57 ` Alexandre Belloni
2015-06-04 21:08 ` Philippe Reynes
2015-06-04 22:17 ` Alexandre Belloni
2015-05-15 22:35 ` Philippe Reynes [this message]
2015-05-28 12:06 ` [PATCH 2/2] rtc: mxc: add support of device tree Alexandre Belloni
2015-06-04 21:26 ` Philippe Reynes
2015-06-04 22:22 ` Alexandre Belloni
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431729330-7625-3-git-send-email-tremyfr@gmail.com \
--to=tremyfr@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).