From: stefan@agner.ch (Stefan Agner)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: imx: clk-vf610: enable debug access port by default
Date: Mon, 18 May 2015 00:13:33 +0200 [thread overview]
Message-ID: <1431900813-5466-1-git-send-email-stefan@agner.ch> (raw)
Enabled DAP (debug access port) by default. This enables the hw-
breakpoint framework to make use of the breakpoints and watchpoints
supported by hardware.
[ 0.215805] hw-breakpoint: found 2 (+1 reserved) breakpoint and 1 watchpoint registers.
[ 0.224624] hw-breakpoint: maximum watchpoint size is 4 bytes.
Without this clock, the hw-breakpoint driver claims an undefined
instruction during initialization:
[ 0.227380] hw-breakpoint: Debug register access (0xee003e17) caused undefined instruction on CPU 0
[ 0.227519] hw-breakpoint: CPU 0 failed to disable vector catch
Signed-off-by: Stefan Agner <stefan@agner.ch>
---
drivers/clk/imx/clk-vf610.c | 2 ++
include/dt-bindings/clock/vf610-clock.h | 3 ++-
2 files changed, 4 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/imx/clk-vf610.c b/drivers/clk/imx/clk-vf610.c
index 61876ed..1c2d324 100644
--- a/drivers/clk/imx/clk-vf610.c
+++ b/drivers/clk/imx/clk-vf610.c
@@ -118,6 +118,7 @@ static struct clk_onecell_data clk_data;
static unsigned int const clks_init_on[] __initconst = {
VF610_CLK_SYS_BUS,
VF610_CLK_DDR_SEL,
+ VF610_CLK_DAP,
};
static struct clk * __init vf610_get_fixed_clock(
@@ -383,6 +384,7 @@ static void __init vf610_clocks_init(struct device_node *ccm_node)
clk[VF610_CLK_DMAMUX3] = imx_clk_gate2("dmamux3", "platform_bus", CCM_CCGR6, CCM_CCGRx_CGn(2));
clk[VF610_CLK_SNVS] = imx_clk_gate2("snvs-rtc", "ipg_bus", CCM_CCGR6, CCM_CCGRx_CGn(7));
+ clk[VF610_CLK_DAP] = imx_clk_gate("dap", "platform_bus", CCM_CCSR, 24);
imx_check_clocks(clk, ARRAY_SIZE(clk));
diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h
index 979d24a..d197634 100644
--- a/include/dt-bindings/clock/vf610-clock.h
+++ b/include/dt-bindings/clock/vf610-clock.h
@@ -193,6 +193,7 @@
#define VF610_PLL6_BYPASS 180
#define VF610_PLL7_BYPASS 181
#define VF610_CLK_SNVS 182
-#define VF610_CLK_END 183
+#define VF610_CLK_DAP 183
+#define VF610_CLK_END 184
#endif /* __DT_BINDINGS_CLOCK_VF610_H */
--
2.4.1
next reply other threads:[~2015-05-17 22:13 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-17 22:13 Stefan Agner [this message]
2015-05-21 0:39 ` [PATCH] ARM: imx: clk-vf610: enable debug access port by default Shawn Guo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431900813-5466-1-git-send-email-stefan@agner.ch \
--to=stefan@agner.ch \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).