From mboxrd@z Thu Jan 1 00:00:00 1970 From: eric@anholt.net (Eric Anholt) Date: Mon, 18 May 2015 12:43:33 -0700 Subject: [PATCH 1/7] dt/bindings: Add binding for the Raspberry Pi clock provider In-Reply-To: <1431978219-14226-1-git-send-email-eric@anholt.net> References: <1431978219-14226-1-git-send-email-eric@anholt.net> Message-ID: <1431978219-14226-2-git-send-email-eric@anholt.net> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The hardware clocks are not controllable by the ARM, so we have to make requests to the firmware to do so from the VPU side. This will let us replace fixed clocks in our DT with actual clock control (and correct frequency information). Signed-off-by: Eric Anholt --- .../bindings/clock/raspberrypi,firmware-clocks.txt | 24 ++++++++++++++++++++++ 1 file changed, 24 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.txt diff --git a/Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.txt b/Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.txt new file mode 100644 index 0000000..9e1f21b --- /dev/null +++ b/Documentation/devicetree/bindings/clock/raspberrypi,firmware-clocks.txt @@ -0,0 +1,24 @@ +Raspberry Pi firmware clock provider. + +The Raspberry Pi architecture doesn't provide direct access to the +CLOCKMAN peripheral from the ARM side, so Linux has to make requests +to the VPU firmware to program them. + +This binding uses the common clock binding: +Documentation/devicetree/bindings/clock/clock-bindings.txt + +Required properties: +- compatible: Should be "raspberrypi,firmware-clocks" + +- #clock-cells: Shall have value <1>. The permitted clock-specifier values + can be found in include/dt-bindings/clk/raspberrypi.h. + +- firmware: Phandle to the firmware driver node. + +Example: + +firmware_clocks: firmware-clocks { + compatible = "raspberrypi,firmware-clocks"; + #clock-cells = <1>; + firmware = <&firmware>; +}; -- 2.1.4