From mboxrd@z Thu Jan 1 00:00:00 1970 From: chaotian.jing@mediatek.com (Chaotian Jing) Date: Tue, 19 May 2015 14:36:45 +0800 Subject: [PATCH v4 1/7] mmc: dt-bindings: add Mediatek MMC bindings In-Reply-To: <1432017411-2996-1-git-send-email-chaotian.jing@mediatek.com> References: <1432017411-2996-1-git-send-email-chaotian.jing@mediatek.com> Message-ID: <1432017411-2996-2-git-send-email-chaotian.jing@mediatek.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Document the device-tree binding of Mediatek MMC host Signed-off-by: Chaotian Jing --- Documentation/devicetree/bindings/mmc/mtk-sd.txt | 33 ++++++++++++++++++++++++ 1 file changed, 33 insertions(+) create mode 100644 Documentation/devicetree/bindings/mmc/mtk-sd.txt diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt new file mode 100644 index 0000000..ba6d668 --- /dev/null +++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt @@ -0,0 +1,33 @@ +* MTK MMC controller + +The MTK MSDC can act as a MMC controller +to support MMC, SD, and SDIO types of memory cards. + +This file documents differences between the core properties in mmc.txt +and the properties used by the msdc driver. + +Required properties: +- compatible: Should be "mediatek,mt8173-mmc","mediatek,mt8135-mmc". +- interrupts: Should contain MSDC interrupt number +- clocks: MSDC source clock, HCLK, HCLK is mandatory when it is not controlled by Infra +- clock-names: "source", "hclk" +- pinctrl-names: should be "default", "state_uhs" +- pinctrl-0: should contain default/high speed pin ctrl +- pinctrl-1: should contain uhs mode pin ctrl +- vmmc-supply: power to the Core + +Optional properties: +- vqmmc-supply: power to the IO(for SD/SDIO) + +Examples: +mmc0: mmc at 11230000 { + compatible = "mediatek,mt8173-mmc", "mediatek,mt8135-mmc"; + reg = <0 0x11230000 0 0x108>; + interrupts = ; + vmmc-supply = <&mt6397_vemc_3v3_reg>; + clocks = <&pericfg CLK_PERI_MSDC30_0>, <&topckgen CLK_TOP_MSDC50_0_H_SEL>; + clock-names = "source", "hclk"; + pinctrl-names = "default", "state_uhs"; + pinctrl-0 = <&mmc0_pins_default>; + pinctrl-1 = <&mmc0_pins_uhs>; +}; -- 1.8.1.1.dirty