From: k.kozlowski.k@gmail.com (Krzysztof Kozlowski)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH 1/2] ARM: dts: tegra: Add labels to Tegra114 nodes
Date: Tue, 19 May 2015 20:51:18 +0900 [thread overview]
Message-ID: <1432036279-6318-1-git-send-email-k.kozlowski.k@gmail.com> (raw)
Add new labels to certain nodes on Tegra114 so they could be easily
referenced by board DTS files.
Signed-off-by: Krzysztof Kozlowski <k.kozlowski.k@gmail.com>
---
Tested by comparison of generated DTB and decompiled DTB->DTS for each
commit. Each output was the same.
---
arch/arm/boot/dts/tegra114.dtsi | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi
index f58a3d9d5f13..1b31cefd1047 100644
--- a/arch/arm/boot/dts/tegra114.dtsi
+++ b/arch/arm/boot/dts/tegra114.dtsi
@@ -10,7 +10,7 @@
compatible = "nvidia,tegra114";
interrupt-parent = <&lic>;
- host1x at 50000000 {
+ host1x: host1x at 50000000 {
compatible = "nvidia,tegra114-host1x", "simple-bus";
reg = <0x50000000 0x00028000>;
interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */
@@ -318,7 +318,7 @@
status = "disabled";
};
- i2c at 7000c000 {
+ i2c1: i2c at 7000c000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c000 0x100>;
interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
@@ -363,7 +363,7 @@
status = "disabled";
};
- i2c at 7000c700 {
+ i2c4: i2c at 7000c700 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000c700 0x100>;
interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
@@ -378,7 +378,7 @@
status = "disabled";
};
- i2c at 7000d000 {
+ i2c5: i2c at 7000d000 {
compatible = "nvidia,tegra114-i2c";
reg = <0x7000d000 0x100>;
interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
@@ -438,7 +438,7 @@
status = "disabled";
};
- spi at 7000da00 {
+ spi4: spi at 7000da00 {
compatible = "nvidia,tegra114-spi";
reg = <0x7000da00 0x200>;
interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>;
@@ -500,7 +500,7 @@
status = "disabled";
};
- pmc at 7000e400 {
+ pmc: pmc at 7000e400 {
compatible = "nvidia,tegra114-pmc";
reg = <0x7000e400 0x400>;
clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>;
@@ -527,7 +527,7 @@
#iommu-cells = <1>;
};
- ahub at 70080000 {
+ ahub: ahub at 70080000 {
compatible = "nvidia,tegra114-ahub";
reg = <0x70080000 0x200>,
<0x70080200 0x100>,
@@ -648,7 +648,7 @@
status = "disabled";
};
- sdhci at 78000400 {
+ sdhci3: sdhci at 78000400 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000400 0x200>;
interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
@@ -658,7 +658,7 @@
status = "disabled";
};
- sdhci at 78000600 {
+ sdhci4: sdhci at 78000600 {
compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci";
reg = <0x78000600 0x200>;
interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>;
@@ -668,7 +668,7 @@
status = "disabled";
};
- usb at 7d000000 {
+ usb1: usb at 7d000000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d000000 0x4000>;
interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
@@ -704,7 +704,7 @@
status = "disabled";
};
- usb at 7d008000 {
+ usb3: usb at 7d008000 {
compatible = "nvidia,tegra30-ehci", "usb-ehci";
reg = <0x7d008000 0x4000>;
interrupts = <GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>;
--
2.1.4
next reply other threads:[~2015-05-19 11:51 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-19 11:51 Krzysztof Kozlowski [this message]
2015-05-19 13:53 ` [RESEND PATCH 1/2] ARM: dts: tegra: Add labels to Tegra114 nodes Stephen Warren
2015-05-19 23:35 ` Krzysztof Kozłowski
[not found] ` <1432036279-6318-2-git-send-email-k.kozlowski.k@gmail.com>
2015-05-20 4:05 ` [RESEND PATCH 2/2] ARM: dts: tegra: Use labels for overriding nodes in Tegra114 boards Alexandre Courbot
2015-05-20 5:03 ` Krzysztof Kozłowski
2015-05-20 5:05 ` Alexandre Courbot
2015-05-20 12:40 ` Thierry Reding
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432036279-6318-1-git-send-email-k.kozlowski.k@gmail.com \
--to=k.kozlowski.k@gmail.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).