[PATCH v2] i2c: designware: Avoid unnecessary resuming during system suspend

[jszhang@marvell.com (Jisheng Zhang)]

Commit 1fc2fe204cb9 ("i2c: designware: Add runtime PM hooks") adds
runtime pm support using the same ops for system pm and runtime pm.
When suspend to ram, the i2c host may have been runtime suspended, thus
i2c_dw_disable() hangs.

Previously, I fixed this issue by separating ops for system pm and
runtime pm, then in the system suspend/resume path, runtime pm apis are
used to ensure the device is at correct state.

But as Mika Westerberg pointed out: it sounds a bit silly to resume the
device just because you want to call i2c_dw_disable() for it before
suspending again. He then suggested an elegant solution which keeps the
device runtime suspended during system suspend with the help of
'dev->power.direct_complete'. This patch adopted this solution, and in
fact Mika provided the main code.

Signed-off-by: Jisheng Zhang <jszhang@marvell.com>
---
 v2 change:
	- adopt Mika's suggestion to make use of direct_complete flag

 drivers/i2c/busses/i2c-designware-platdrv.c | 33 +++++++++++++++++++++++++----
 1 file changed, 29 insertions(+), 4 deletions(-)

diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index 0a80e4a..f89650f 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -298,6 +298,22 @@ static const struct of_device_id dw_i2c_of_match[] = {
 MODULE_DEVICE_TABLE(of, dw_i2c_of_match);
 #endif
 
+#ifdef CONFIG_PM_SLEEP
+static int dw_i2c_prepare(struct device *dev)
+{
+	return pm_runtime_suspended(dev);
+}
+
+static void dw_i2c_complete(struct device *dev)
+{
+	if (dev->power.direct_complete)
+		pm_request_resume(dev);
+}
+#else
+#define dw_i2c_prepare	NULL
+#define dw_i2c_complete	NULL
+#endif
+
 #ifdef CONFIG_PM
 static int dw_i2c_suspend(struct device *dev)
 {
@@ -322,10 +338,19 @@ static int dw_i2c_resume(struct device *dev)
 
 	return 0;
 }
-#endif
 
-static UNIVERSAL_DEV_PM_OPS(dw_i2c_dev_pm_ops, dw_i2c_suspend,
-			    dw_i2c_resume, NULL);
+static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
+	.prepare = dw_i2c_prepare,
+	.complete = dw_i2c_complete,
+	SET_SYSTEM_SLEEP_PM_OPS(dw_i2c_suspend, dw_i2c_resume)
+	SET_RUNTIME_PM_OPS(dw_i2c_suspend,
+		dw_i2c_resume, NULL)
+};
+
+#define DW_I2C_DEV_PMOPS (&dw_i2c_dev_pm_ops)
+#else
+#define DW_I2C_DEV_PMOPS NULL
+#endif
 
 /* work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
@@ -337,7 +362,7 @@ static struct platform_driver dw_i2c_driver = {
 		.name	= "i2c_designware",
 		.of_match_table = of_match_ptr(dw_i2c_of_match),
 		.acpi_match_table = ACPI_PTR(dw_i2c_acpi_match),
-		.pm	= &dw_i2c_dev_pm_ops,
+		.pm	= DW_I2C_DEV_PMOPS,
 	},
 };
 
-- 
2.1.4