[PATCH 1/3] ARM: dts: sun7i: Add uart4_pins_b definition

[PATCH 1/3] ARM: dts: sun7i: Add uart4_pins_b definition

[Hans de Goede]

From: Michael Ring <mail@michael-ring.org>

Some boards (e.g. the BananaPro) use alternative pins for uart4, add a pinmux
entry for these.

Signed-off-by: Michael Ring <mail@michael-ring.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun7i-a20.dtsi | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi
index e04cdf9..99d48b4 100644
--- a/arch/arm/boot/dts/sun7i-a20.dtsi
+++ b/arch/arm/boot/dts/sun7i-a20.dtsi
@@ -844,6 +844,13 @@
 				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
 			};
 
+			uart4_pins_b: uart4 at 1 {
+				allwinner,pins = "PH4", "PH5";
+				allwinner,function = "uart4";
+				allwinner,drive = <SUN4I_PINCTRL_10_MA>;
+				allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
+			};
+
 			uart5_pins_a: uart5 at 0 {
 				allwinner,pins = "PI10", "PI11";
 				allwinner,function = "uart5";
-- 
2.4.1

[PATCH 2/3] ARM: dts: sun7i: Add uart2 support for BananaPi

[Hans de Goede]

From: Michael Ring <mail@michael-ring.org>

Uart2 is available at the bananapi io-pins, add a dts node for this
(so that people can easily enable it) but leave it disabled as the pins
are primarily intended for gpio as documented here:
http://wiki.lemaker.org/Pin_definition

Signed-off-by: Michael Ring <mail@michael-ring.org>
[hdegoede at redhat.com: Disable uart2 by default]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun7i-a20-bananapi.dts | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
index 9f7b472..3e357ef 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts
@@ -58,6 +58,7 @@
 		serial0 = &uart0;
 		serial1 = &uart3;
 		serial2 = &uart7;
+		serial3 = &uart2;
 	};
 
 	chosen {
@@ -204,6 +205,12 @@
 	status = "okay";
 };
 
+&uart2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart2_pins_a>;
+	status = "disabled";
+};
+
 &uart3 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart3_pins_b>;
-- 
2.4.1

[PATCH 2/3] ARM: dts: sun7i: Add uart2 support for BananaPi

[Maxime Ripard]

On Thu, May 21, 2015 at 02:32:34PM +0200, Hans de Goede wrote:
> From: Michael Ring <mail@michael-ring.org>
> 
> Uart2 is available at the bananapi io-pins, add a dts node for this
> (so that people can easily enable it) but leave it disabled as the pins
> are primarily intended for gpio as documented here:
> http://wiki.lemaker.org/Pin_definition

So far the policy we had on this is only to add to the DT the primary
purpose of these pins.

Even though that might seem arbitrary, it's the only way to prevent
anyone adding their own configuration for those pins, which would be a
mess to maintain and use. It's even more true since that sort of thing
is exactly where the overlays shine.

So, I'm ok with adding the uart4, but the uart2 should go.

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150521/9e4a888d/attachment.sig>

[PATCH 3/3] ARM: dts: sun7i: Add uart4 support for BananaPro, disable uart2

[Hans de Goede]

From: Michael Ring <mail@michael-ring.org>

The BananaPro uses uart4 for the default rx/tx pins on the 40 pins connector,
so enable uart4.

Uart2 is also available at the bananapro io-pins, but like on the bananapi
the primary function of the pins is to act as gpios, see:
http://forum.lemaker.org/forum.php?mod=viewthread&tid=10852

Disable the uart2 node by default, but leave it in place so that people
can easily enable it.

Signed-off-by: Michael Ring <mail@michael-ring.org>
[hdegoede at redhat.com: Disable uart2 by default]
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 arch/arm/boot/dts/sun7i-a20-bananapro.dts | 9 ++++++++-
 1 file changed, 8 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
index 45e2a02..4edb8a4 100644
--- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
@@ -52,8 +52,9 @@
 
 	aliases {
 		serial0 = &uart0;
-		serial1 = &uart2;
+		serial1 = &uart4;
 		serial2 = &uart7;
+		serial3 = &uart2;
 	};
 
 	chosen {
@@ -253,6 +254,12 @@
 &uart2 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart2_pins_a>;
+	status = "disabled";
+};
+
+&uart4 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart4_pins_b>;
 	status = "okay";
 };
 
-- 
2.4.1

[PATCH 1/3] ARM: dts: sun7i: Add uart4_pins_b definition

[Maxime Ripard]

On Thu, May 21, 2015 at 02:32:33PM +0200, Hans de Goede wrote:
> From: Michael Ring <mail@michael-ring.org>
> 
> Some boards (e.g. the BananaPro) use alternative pins for uart4, add a pinmux
> entry for these.
> 
> Signed-off-by: Michael Ring <mail@michael-ring.org>
> Signed-off-by: Hans de Goede <hdegoede@redhat.com>

Applied, thanks!

Maxime

-- 
Maxime Ripard, Free Electrons
Embedded Linux, Kernel and Android engineering
http://free-electrons.com
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 819 bytes
Desc: Digital signature
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20150521/1305244a/attachment.sig>