Linux-ARM-Kernel Archive on lore.kernel.org
 help / color / mirror / Atom feed
From: ykk@rock-chips.com (Yakir Yang)
To: linux-arm-kernel@lists.infradead.org
Subject: [RESEND PATCH v1 0/2] Add dw_hdmi i2s audio driver support
Date: Fri, 22 May 2015 10:13:51 -0500	[thread overview]
Message-ID: <1432307631-7667-1-git-send-email-ykk@rock-chips.com> (raw)


As Russell have send an series patches for dw_hdmi audio, it make us
upload dw_hdmi audio patch more easier, and most important it works
well on rockchip platform, so I make this patch that try to add another
audio interface support in dw_hdmi driver.

Here are the list that I have make in my series:
- rename dw_hdmi-ahb-audio.h to dw_hdmi-audio.h
- add dw_hdmi i2s audio driver

Here are the series patches that I depends on:
* drm: bridge/dw_hdmi: fixed codec style [Yakir Yang]
* drm: bridge/dw_hdmi_rockchip: improve hdmi eye-diagram test
* drm: bridge/dw_hdmi: improve hdmi single-end test
* drm: imx/dw_hdmi: move phy comments [Russell King]
* drm: bridge/dw_hdmi: clean up phy configuration
* drm: bridge/dw_hdmi: combine hdmi_set_clock_regenerator_n() and hdmi_regenerate_cts()
* drm: bridge/dw_hdmi: protect n/cts setting with a mutex
* drm: bridge/dw_hdmi: adjust n/cts setting order
* drm: bridge/dw_hdmi: clean up hdmi_set_clk_regenerator()
* drm: bridge/dw_hdmi: use drm_hdmi_avi_infoframe_from_display_mode()
* drm: bridge/dw_hdmi: simplify hdmi_config_AVI() a little
* drm: bridge/dw_hdmi: remove mhsyncpolarity/mvsyncpolarity/minterlaced
* drm: bridge/dw_hdmi: introduce interface to setting sample rate
* drm: bridge/dw_hdmi: introduce interfaces to enable and disable audio
* drm/edid: add function to help find SADs
* sound/core: add DRM ELD helper
* sound/core: add IEC958 channel status helper
* drm: bridge/dw_hdmi-ahb-audio: add audio driver
* drm: bridge/dw_hdmi-ahb-audio: parse ELD from HDMI driver

Best regards,
Yakir Yang



Yakir Yang (2):
  drm: bridge/dw_hdmi: rename dw_hdmi-ahb-audio.h to dw_hdmi-audio.h
  drm: bridge/dw_hdmi-i2s-audio: add audio driver

 drivers/gpu/drm/bridge/Kconfig                     |   9 +
 drivers/gpu/drm/bridge/Makefile                    |   1 +
 drivers/gpu/drm/bridge/dw_hdmi-ahb-audio.c         |   2 +-
 .../{dw_hdmi-ahb-audio.h => dw_hdmi-audio.h}       |   0
 drivers/gpu/drm/bridge/dw_hdmi-i2s-audio.c         | 412 +++++++++++++++++++++
 drivers/gpu/drm/bridge/dw_hdmi.c                   |  26 +-
 drivers/gpu/drm/bridge/dw_hdmi.h                   |   3 +
 7 files changed, 442 insertions(+), 11 deletions(-)
 rename drivers/gpu/drm/bridge/{dw_hdmi-ahb-audio.h => dw_hdmi-audio.h} (100%)
 create mode 100644 drivers/gpu/drm/bridge/dw_hdmi-i2s-audio.c

-- 
2.1.2

             reply	other threads:[~2015-05-22 15:13 UTC|newest]

Thread overview: 5+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-22 15:13 Yakir Yang [this message]
2015-05-22 15:14 ` [RESEND PATCH v1 1/2] drm: bridge/dw_hdmi: rename dw_hdmi-ahb-audio.h to dw_hdmi-audio.h Yakir Yang
2015-05-22 15:14 ` [RESEND PATCH v1 2/2] drm: bridge/dw_hdmi-i2s-audio: add audio driver Yakir Yang
2015-05-25  8:24   ` Paul Bolle
2015-05-25  9:38     ` Yakir

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432307631-7667-1-git-send-email-ykk@rock-chips.com \
    --to=ykk@rock-chips.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox