From: hanjun.guo@linaro.org (Hanjun Guo)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 03/11] x86, pci: Abstract PCI config accessors and use AMD Fam10h workaround exclusively.
Date: Tue, 26 May 2015 20:49:16 +0800 [thread overview]
Message-ID: <1432644564-24746-4-git-send-email-hanjun.guo@linaro.org> (raw)
In-Reply-To: <1432644564-24746-1-git-send-email-hanjun.guo@linaro.org>
From: Tomasz Nowicki <tomasz.nowicki@linaro.org>
approach. Special MMIO accessors are registered for AMD Fam10h CPUs only.
Signed-off-by: Tomasz Nowicki <tomasz.nowicki@linaro.org>
Signed-off-by: Hanjun Guo <hanjun.guo@linaro.org>
Tested-by: Suravee Suthikulpanit <Suravee.Suthikulpanit@amd.com>
---
arch/x86/include/asm/pci_x86.h | 8 +++
arch/x86/pci/mmconfig-shared.c | 114 +++++++++++++++++++++++++++++++++++++++++
arch/x86/pci/mmconfig_32.c | 24 +--------
arch/x86/pci/mmconfig_64.c | 24 +--------
arch/x86/pci/numachip.c | 24 +--------
5 files changed, 128 insertions(+), 66 deletions(-)
diff --git a/arch/x86/include/asm/pci_x86.h b/arch/x86/include/asm/pci_x86.h
index eddf8f0..f7f3b6a 100644
--- a/arch/x86/include/asm/pci_x86.h
+++ b/arch/x86/include/asm/pci_x86.h
@@ -139,6 +139,11 @@ struct pci_mmcfg_region {
char name[PCI_MMCFG_RESOURCE_NAME_LEN];
};
+struct pci_mmcfg_mmio_ops {
+ u32 (*read)(int len, void __iomem *addr);
+ void (*write)(int len, void __iomem *addr, u32 value);
+};
+
extern int __init pci_mmcfg_arch_init(void);
extern void __init pci_mmcfg_arch_free(void);
extern int pci_mmcfg_arch_map(struct pci_mmcfg_region *cfg);
@@ -147,6 +152,9 @@ extern int pci_mmconfig_insert(struct device *dev, u16 seg, u8 start, u8 end,
phys_addr_t addr);
extern int pci_mmconfig_delete(u16 seg, u8 start, u8 end);
extern struct pci_mmcfg_region *pci_mmconfig_lookup(int segment, int bus);
+extern u32 pci_mmio_read(int len, void __iomem *addr);
+extern void pci_mmio_write(int len, void __iomem *addr, u32 value);
+extern void pci_mmconfig_register_mmio(struct pci_mmcfg_mmio_ops *ops);
extern struct list_head pci_mmcfg_list;
diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c
index dd30b7e..8b3bc4f 100644
--- a/arch/x86/pci/mmconfig-shared.c
+++ b/arch/x86/pci/mmconfig-shared.c
@@ -31,6 +31,118 @@ static DEFINE_MUTEX(pci_mmcfg_lock);
LIST_HEAD(pci_mmcfg_list);
+static u32
+pci_mmconfig_generic_read(int len, void __iomem *addr)
+{
+ u32 data = 0;
+
+ switch (len) {
+ case 1:
+ data = readb(addr);
+ break;
+ case 2:
+ data = readw(addr);
+ break;
+ case 4:
+ data = readl(addr);
+ break;
+ }
+
+ return data;
+}
+
+static void
+pci_mmconfig_generic_write(int len, void __iomem *addr, u32 value)
+{
+ switch (len) {
+ case 1:
+ writeb(value, addr);
+ break;
+ case 2:
+ writew(value, addr);
+ break;
+ case 4:
+ writel(value, addr);
+ break;
+ }
+}
+
+static struct pci_mmcfg_mmio_ops pci_mmcfg_mmio_default = {
+ .read = pci_mmconfig_generic_read,
+ .write = pci_mmconfig_generic_write,
+};
+
+static struct pci_mmcfg_mmio_ops *pci_mmcfg_mmio = &pci_mmcfg_mmio_default;
+
+static u32
+pci_mmconfig_amd_read(int len, void __iomem *addr)
+{
+ u32 data = 0;
+
+ switch (len) {
+ case 1:
+ data = mmio_config_readb(addr);
+ break;
+ case 2:
+ data = mmio_config_readw(addr);
+ break;
+ case 4:
+ data = mmio_config_readl(addr);
+ break;
+ }
+
+ return data;
+}
+
+static void
+pci_mmconfig_amd_write(int len, void __iomem *addr, u32 value)
+{
+ switch (len) {
+ case 1:
+ mmio_config_writeb(addr, value);
+ break;
+ case 2:
+ mmio_config_writew(addr, value);
+ break;
+ case 4:
+ mmio_config_writel(addr, value);
+ break;
+ }
+}
+
+static struct pci_mmcfg_mmio_ops pci_mmcfg_mmio_amd_fam10h = {
+ .read = pci_mmconfig_amd_read,
+ .write = pci_mmconfig_amd_write,
+};
+
+void
+pci_mmconfig_register_mmio(struct pci_mmcfg_mmio_ops *ops)
+{
+ pci_mmcfg_mmio = ops;
+}
+
+u32
+pci_mmio_read(int len, void __iomem *addr)
+{
+ if (!pci_mmcfg_mmio) {
+ pr_err("PCI config space has no accessors !");
+ return 0;
+ }
+
+ return pci_mmcfg_mmio->read(len, addr);
+}
+
+void
+pci_mmio_write(int len, void __iomem *addr, u32 value)
+{
+ if (!pci_mmcfg_mmio) {
+ pr_err("PCI config space has no accessors !");
+ return;
+ }
+
+ pci_mmcfg_mmio->write(len, addr, value);
+}
+
static void __init pci_mmconfig_remove(struct pci_mmcfg_region *cfg)
{
if (cfg->res.parent)
@@ -231,6 +343,8 @@ static const char *__init pci_mmcfg_amd_fam10h(void)
return NULL;
}
+ pci_mmconfig_register_mmio(&pci_mmcfg_mmio_amd_fam10h);
+
return "AMD Family 10h NB";
}
diff --git a/arch/x86/pci/mmconfig_32.c b/arch/x86/pci/mmconfig_32.c
index 43984bc..4b3d025 100644
--- a/arch/x86/pci/mmconfig_32.c
+++ b/arch/x86/pci/mmconfig_32.c
@@ -71,17 +71,7 @@ err: *value = -1;
pci_exp_set_dev_base(base, bus, devfn);
- switch (len) {
- case 1:
- *value = mmio_config_readb(mmcfg_virt_addr + reg);
- break;
- case 2:
- *value = mmio_config_readw(mmcfg_virt_addr + reg);
- break;
- case 4:
- *value = mmio_config_readl(mmcfg_virt_addr + reg);
- break;
- }
+ *value = pci_mmio_read(len, mmcfg_virt_addr + reg);
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
rcu_read_unlock();
@@ -108,17 +98,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
pci_exp_set_dev_base(base, bus, devfn);
- switch (len) {
- case 1:
- mmio_config_writeb(mmcfg_virt_addr + reg, value);
- break;
- case 2:
- mmio_config_writew(mmcfg_virt_addr + reg, value);
- break;
- case 4:
- mmio_config_writel(mmcfg_virt_addr + reg, value);
- break;
- }
+ pci_mmio_write(len, mmcfg_virt_addr + reg, value);
raw_spin_unlock_irqrestore(&pci_config_lock, flags);
rcu_read_unlock();
diff --git a/arch/x86/pci/mmconfig_64.c b/arch/x86/pci/mmconfig_64.c
index bea5249..032593d 100644
--- a/arch/x86/pci/mmconfig_64.c
+++ b/arch/x86/pci/mmconfig_64.c
@@ -42,17 +42,7 @@ err: *value = -1;
goto err;
}
- switch (len) {
- case 1:
- *value = mmio_config_readb(addr + reg);
- break;
- case 2:
- *value = mmio_config_readw(addr + reg);
- break;
- case 4:
- *value = mmio_config_readl(addr + reg);
- break;
- }
+ *value = pci_mmio_read(len, addr + reg);
rcu_read_unlock();
return 0;
@@ -74,17 +64,7 @@ static int pci_mmcfg_write(unsigned int seg, unsigned int bus,
return -EINVAL;
}
- switch (len) {
- case 1:
- mmio_config_writeb(addr + reg, value);
- break;
- case 2:
- mmio_config_writew(addr + reg, value);
- break;
- case 4:
- mmio_config_writel(addr + reg, value);
- break;
- }
+ pci_mmio_write(len, addr + reg, value);
rcu_read_unlock();
return 0;
diff --git a/arch/x86/pci/numachip.c b/arch/x86/pci/numachip.c
index 2e565e6..5047e9b 100644
--- a/arch/x86/pci/numachip.c
+++ b/arch/x86/pci/numachip.c
@@ -51,17 +51,7 @@ err: *value = -1;
goto err;
}
- switch (len) {
- case 1:
- *value = mmio_config_readb(addr + reg);
- break;
- case 2:
- *value = mmio_config_readw(addr + reg);
- break;
- case 4:
- *value = mmio_config_readl(addr + reg);
- break;
- }
+ *value = pci_mmio_read(len, addr + reg);
rcu_read_unlock();
return 0;
@@ -87,17 +77,7 @@ static int pci_mmcfg_write_numachip(unsigned int seg, unsigned int bus,
return -EINVAL;
}
- switch (len) {
- case 1:
- mmio_config_writeb(addr + reg, value);
- break;
- case 2:
- mmio_config_writew(addr + reg, value);
- break;
- case 4:
- mmio_config_writel(addr + reg, value);
- break;
- }
+ pci_mmio_write(len, addr + reg, value);
rcu_read_unlock();
return 0;
--
1.9.1
next prev parent reply other threads:[~2015-05-26 12:49 UTC|newest]
Thread overview: 61+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-26 12:49 [PATCH 00/11] ARM64 PCI hostbridge init based on ACPI Hanjun Guo
2015-05-26 12:49 ` [PATCH 01/11] ARM64 / PCI: introduce struct pci_controller for ACPI Hanjun Guo
2015-05-26 16:58 ` Liviu Dudau
2015-05-26 17:20 ` Jiang Liu
2015-05-27 8:21 ` Hanjun Guo
2015-09-07 4:14 ` Ganapatrao Kulkarni
2015-09-07 8:45 ` Lorenzo Pieralisi
2015-09-08 13:35 ` Hanjun Guo
2015-05-27 9:47 ` Liviu Dudau
2015-05-27 11:29 ` Jiang Liu
2015-05-26 12:49 ` [PATCH 02/11] x86, pci: Clean up comment about buggy MMIO config space access for AMD Fam10h CPUs Hanjun Guo
2015-08-31 12:04 ` Tomasz Nowicki
2015-05-26 12:49 ` Hanjun Guo [this message]
2015-05-26 12:49 ` [PATCH 04/11] x86, pci: Reorder logic of pci_mmconfig_insert() function Hanjun Guo
2015-05-26 12:49 ` [PATCH 05/11] x86, pci, acpi: Move arch-agnostic MMCONFIG (aka ECAM) and ACPI code out of arch/x86/ directory Hanjun Guo
2015-05-26 17:08 ` Will Deacon
2015-05-27 8:06 ` Tomasz Nowicki
2015-06-02 13:32 ` Lorenzo Pieralisi
2015-06-04 9:28 ` Hanjun Guo
2015-06-04 10:22 ` Lorenzo Pieralisi
2015-06-04 12:28 ` Hanjun Guo
2015-06-08 2:57 ` Hanjun Guo
2015-06-08 15:14 ` Lorenzo Pieralisi
2015-08-31 11:01 ` Tomasz Nowicki
2015-09-07 9:59 ` Tomasz Nowicki
2015-09-08 15:07 ` Lorenzo Pieralisi
2015-09-09 13:47 ` Tomasz Nowicki
2015-09-11 11:20 ` Lorenzo Pieralisi
2015-09-11 12:35 ` Tomasz Nowicki
2015-09-14 9:37 ` Lorenzo Pieralisi
2015-09-14 11:34 ` Tomasz Nowicki
2015-09-14 14:55 ` Tomasz Nowicki
2015-09-25 16:02 ` Tomasz Nowicki
2015-09-25 16:19 ` Lorenzo Pieralisi
2015-10-15 13:22 ` Lorenzo Pieralisi
2015-10-15 14:34 ` Tomasz Nowicki
2015-10-15 16:26 ` Marc Zyngier
2015-10-15 18:51 ` Tomasz Nowicki
2015-05-26 12:49 ` [PATCH 06/11] pci, acpi, mcfg: Provide generic implementation of MCFG code initialization Hanjun Guo
2015-05-26 12:49 ` [PATCH 07/11] x86, pci: mmconfig_{32, 64}.c code refactoring - remove code duplication Hanjun Guo
2015-05-26 12:49 ` [PATCH 08/11] x86, pci, ecam: mmconfig_64.c becomes default implementation for ECAM driver Hanjun Guo
2015-05-26 12:49 ` [PATCH 09/11] pci, acpi, mcfg: Share ACPI PCI config space accessors Hanjun Guo
2015-05-26 12:49 ` [PATCH 10/11] XEN / PCI: Remove the dependence on arch x86 when PCI_MMCONFIG=y Hanjun Guo
2015-05-26 13:54 ` Boris Ostrovsky
2015-05-26 14:00 ` Boris Ostrovsky
2015-05-26 14:54 ` Tomasz Nowicki
2015-05-26 15:44 ` Boris Ostrovsky
2015-05-27 3:55 ` Hanjun Guo
2015-05-26 12:49 ` [PATCH 11/11] ARM64 / PCI / ACPI: support for ACPI based PCI hostbridge init Hanjun Guo
2015-05-26 15:12 ` Tomasz Nowicki
2015-05-27 7:31 ` Hanjun Guo
2015-05-26 17:13 ` Will Deacon
2015-05-26 17:24 ` Jiang Liu
2015-05-27 0:30 ` [PATCH 00/11] ARM64 PCI hostbridge init based on ACPI Rafael J. Wysocki
2015-05-27 3:57 ` Hanjun Guo
2015-06-08 12:05 ` Jagan Teki
2015-06-10 2:47 ` Hanjun Guo
2015-10-15 19:15 ` Jon Masters
2015-10-15 23:42 ` Hanjun Guo
2015-10-15 23:49 ` Jon Masters
2015-12-07 20:29 ` Bjorn Helgaas
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432644564-24746-4-git-send-email-hanjun.guo@linaro.org \
--to=hanjun.guo@linaro.org \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).