From mboxrd@z Thu Jan 1 00:00:00 1970 From: chunfeng.yun@mediatek.com (chunfeng.yun at mediatek.com) Date: Wed, 27 May 2015 19:47:58 +0800 Subject: [PATCH 1/6] dt-bindings: Add usb3.0 phy binding for MT65xx SoCs In-Reply-To: <1432727283-20303-1-git-send-email-chunfeng.yun@mediatek.com> References: <1432727283-20303-1-git-send-email-chunfeng.yun@mediatek.com> Message-ID: <1432727283-20303-2-git-send-email-chunfeng.yun@mediatek.com> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org From: Chunfeng Yun add a DT binding documentation of usb3.0 phy for MT65xx SoCs from Mediatek. Signed-off-by: Chunfeng Yun --- .../devicetree/bindings/usb/mt65xx-u3phy.txt | 37 ++++++++++++++++++++++ 1 file changed, 37 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/mt65xx-u3phy.txt diff --git a/Documentation/devicetree/bindings/usb/mt65xx-u3phy.txt b/Documentation/devicetree/bindings/usb/mt65xx-u3phy.txt new file mode 100644 index 0000000..b0b91b0 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/mt65xx-u3phy.txt @@ -0,0 +1,37 @@ +MT65xx U3PHY + +The device node for Mediatek SOC usb3.0 phy + +Required properties: + - compatible : Should be "mediatek,mt8173-u3phy" + - reg : Offset and length of registers, the first is for mac domain, + another for phy domain + - power-domains: to enable usb's mtcmos + - reg-vusb33-supply: regulator of usb avdd3.3v + - clocks : must support all clocks that phy need + - clock-names: should be "wakeup_deb_p0", "wakeup_deb_p1" for wakeup + debounce control clocks, "sys_mac" for sys and mac clocks and + "u3phya_ref" for u3phya reference clock. + +Optional properties: + - disable-usb2-p1 : disable port1 of usb2.0 which has two ports. + - reg-p1-vbus-supply : regulator of port1's vbus; + +Example: + +u3phy: usb-phy at 11271000 { + compatible = "mediatek,mt8173-u3phy"; + reg = <0 0x11271000 0 0x3000>, + <0 0x11280000 0 0x20000>; + power-domains = <&scpsys MT8173_POWER_DOMAIN_USB>; + reg-vusb33-supply = <&mt6397_usb_reg>; + clocks = <&perisys PERI_USB0>, + <&perisys PERI_USB1>, + <&topckgen CLK_TOP_USB30_SEL>, + <&apmixedsys CLK_APMIXED_REF2USB_TX>; + clock-names = "wakeup_deb_p0", + "wakeup_deb_p1", + "sys_mac", + "u3phya_ref"; + disable-usb2-p1; +}; -- 1.8.1.1.dirty