From mboxrd@z Thu Jan 1 00:00:00 1970 From: vaibhav.hiremath@linaro.org (Vaibhav Hiremath) Date: Thu, 28 May 2015 18:33:42 +0530 Subject: [PATCH 10/12] i2c: pxa: Update debug function to dump more info on error In-Reply-To: <1432818224-17070-1-git-send-email-vaibhav.hiremath@linaro.org> References: <1432818224-17070-1-git-send-email-vaibhav.hiremath@linaro.org> Message-ID: <1432818224-17070-11-git-send-email-vaibhav.hiremath@linaro.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org Update i2c_pxa_scream_blue_murder() fn to print more information in case of error. Signed-off-by: Jett.Zhou [vaibhav.hiremath at linaro.org: Split patches into logical changes and update the Changelog] Signed-off-by: Vaibhav Hiremath Cc: Wolfram Sang Signed-off-by: Vaibhav Hiremath --- drivers/i2c/busses/i2c-pxa.c | 11 ++++++++--- 1 file changed, 8 insertions(+), 3 deletions(-) diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c index cf6c383..065e647 100644 --- a/drivers/i2c/busses/i2c-pxa.c +++ b/drivers/i2c/busses/i2c-pxa.c @@ -147,6 +147,7 @@ struct pxa_i2c { unsigned int msg_idx; unsigned int msg_ptr; unsigned int slave_addr; + unsigned int req_slave_addr; struct i2c_adapter adap; struct clk *clk; @@ -335,11 +336,13 @@ err_out: static void i2c_pxa_scream_blue_murder(struct pxa_i2c *i2c, const char *why) { unsigned int i; - printk(KERN_ERR "i2c: error: %s\n", why); + printk(KERN_ERR"i2c: <%s> slave_0x%x error: %s\n", i2c->adap.name, + i2c->req_slave_addr >> 1, why); printk(KERN_ERR "i2c: msg_num: %d msg_idx: %d msg_ptr: %d\n", i2c->msg_num, i2c->msg_idx, i2c->msg_ptr); - printk(KERN_ERR "i2c: ICR: %08x ISR: %08x\n", - readl(_ICR(i2c)), readl(_ISR(i2c))); + printk(KERN_ERR "i2c: IBMR: %08x IDBR: %08x ICR: %08x ISR: %08x\n", + readl(_IBMR(i2c)), readl(_IDBR(i2c)), readl(_ICR(i2c)), + readl(_ISR(i2c))); printk(KERN_DEBUG "i2c: log: "); for (i = 0; i < i2c->irqlogidx; i++) printk("[%08x:%08x] ", i2c->isrlog[i], i2c->icrlog[i]); @@ -736,6 +739,7 @@ static inline void i2c_pxa_start_message(struct pxa_i2c *i2c) * Step 1: target slave address into IDBR */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); + i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); /* * Step 2: initiate the write. @@ -1055,6 +1059,7 @@ static void i2c_pxa_irq_txempty(struct pxa_i2c *i2c, u32 isr) * Write the next address. */ writel(i2c_pxa_addr_byte(i2c->msg), _IDBR(i2c)); + i2c->req_slave_addr = i2c_pxa_addr_byte(i2c->msg); /* * And trigger a repeated start, and send the byte. -- 1.9.1