linux-arm-kernel.lists.infradead.org archive mirror
 help / color / mirror / Atom feed
From: alex.bennee@linaro.org (Alex Bennée)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v5 08/12] KVM: arm64: re-factor hyp.S debug register code
Date: Fri, 29 May 2015 10:30:24 +0100	[thread overview]
Message-ID: <1432891828-4816-9-git-send-email-alex.bennee@linaro.org> (raw)
In-Reply-To: <1432891828-4816-1-git-send-email-alex.bennee@linaro.org>

This is a pre-cursor to sharing the code with the guest debug support.
This replaces the big macro that fishes data out of a fixed location
with a more general helper macro to restore a set of debug registers. It
uses macro substitution so it can be re-used for debug control and value
registers. It does however rely on the debug registers being 64 bit
aligned (as they happen to be in the hyp ABI).

Signed-off-by: Alex Benn?e <alex.bennee@linaro.org>

---
v3:
  - return to the patch series
  - add save and restore targets
  - change register use and document
v4:
  - keep original setup/restore names
  - don't use split u32/u64 structure yet
---
 arch/arm64/kvm/hyp.S | 519 ++++++++++++++-------------------------------------
 1 file changed, 140 insertions(+), 379 deletions(-)

diff --git a/arch/arm64/kvm/hyp.S b/arch/arm64/kvm/hyp.S
index 74e63d8..9c4897d 100644
--- a/arch/arm64/kvm/hyp.S
+++ b/arch/arm64/kvm/hyp.S
@@ -228,199 +228,52 @@
 	stp	x24, x25, [x3, #160]
 .endm
 
-.macro save_debug
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	mrs	x26, id_aa64dfr0_el1
-	ubfx	x24, x26, #12, #4	// Extract BRPs
-	ubfx	x25, x26, #20, #4	// Extract WRPs
-	mov	w26, #15
-	sub	w24, w26, w24		// How many BPs to skip
-	sub	w25, w26, w25		// How many WPs to skip
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-1:
-	mrs	x20, dbgbcr15_el1
-	mrs	x19, dbgbcr14_el1
-	mrs	x18, dbgbcr13_el1
-	mrs	x17, dbgbcr12_el1
-	mrs	x16, dbgbcr11_el1
-	mrs	x15, dbgbcr10_el1
-	mrs	x14, dbgbcr9_el1
-	mrs	x13, dbgbcr8_el1
-	mrs	x12, dbgbcr7_el1
-	mrs	x11, dbgbcr6_el1
-	mrs	x10, dbgbcr5_el1
-	mrs	x9, dbgbcr4_el1
-	mrs	x8, dbgbcr3_el1
-	mrs	x7, dbgbcr2_el1
-	mrs	x6, dbgbcr1_el1
-	mrs	x5, dbgbcr0_el1
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-
-1:
-	str	x20, [x3, #(15 * 8)]
-	str	x19, [x3, #(14 * 8)]
-	str	x18, [x3, #(13 * 8)]
-	str	x17, [x3, #(12 * 8)]
-	str	x16, [x3, #(11 * 8)]
-	str	x15, [x3, #(10 * 8)]
-	str	x14, [x3, #(9 * 8)]
-	str	x13, [x3, #(8 * 8)]
-	str	x12, [x3, #(7 * 8)]
-	str	x11, [x3, #(6 * 8)]
-	str	x10, [x3, #(5 * 8)]
-	str	x9, [x3, #(4 * 8)]
-	str	x8, [x3, #(3 * 8)]
-	str	x7, [x3, #(2 * 8)]
-	str	x6, [x3, #(1 * 8)]
-	str	x5, [x3, #(0 * 8)]
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-1:
-	mrs	x20, dbgbvr15_el1
-	mrs	x19, dbgbvr14_el1
-	mrs	x18, dbgbvr13_el1
-	mrs	x17, dbgbvr12_el1
-	mrs	x16, dbgbvr11_el1
-	mrs	x15, dbgbvr10_el1
-	mrs	x14, dbgbvr9_el1
-	mrs	x13, dbgbvr8_el1
-	mrs	x12, dbgbvr7_el1
-	mrs	x11, dbgbvr6_el1
-	mrs	x10, dbgbvr5_el1
-	mrs	x9, dbgbvr4_el1
-	mrs	x8, dbgbvr3_el1
-	mrs	x7, dbgbvr2_el1
-	mrs	x6, dbgbvr1_el1
-	mrs	x5, dbgbvr0_el1
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-
-1:
-	str	x20, [x3, #(15 * 8)]
-	str	x19, [x3, #(14 * 8)]
-	str	x18, [x3, #(13 * 8)]
-	str	x17, [x3, #(12 * 8)]
-	str	x16, [x3, #(11 * 8)]
-	str	x15, [x3, #(10 * 8)]
-	str	x14, [x3, #(9 * 8)]
-	str	x13, [x3, #(8 * 8)]
-	str	x12, [x3, #(7 * 8)]
-	str	x11, [x3, #(6 * 8)]
-	str	x10, [x3, #(5 * 8)]
-	str	x9, [x3, #(4 * 8)]
-	str	x8, [x3, #(3 * 8)]
-	str	x7, [x3, #(2 * 8)]
-	str	x6, [x3, #(1 * 8)]
-	str	x5, [x3, #(0 * 8)]
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
+.macro save_debug type
+	// x4: pointer to register set
+	// x5: number of registers to skip
+	// x6..x22 trashed
+
+	adr	x22, 1f
+	add	x22, x22, x5, lsl #2
+	br	x22
 1:
-	mrs	x20, dbgwcr15_el1
-	mrs	x19, dbgwcr14_el1
-	mrs	x18, dbgwcr13_el1
-	mrs	x17, dbgwcr12_el1
-	mrs	x16, dbgwcr11_el1
-	mrs	x15, dbgwcr10_el1
-	mrs	x14, dbgwcr9_el1
-	mrs	x13, dbgwcr8_el1
-	mrs	x12, dbgwcr7_el1
-	mrs	x11, dbgwcr6_el1
-	mrs	x10, dbgwcr5_el1
-	mrs	x9, dbgwcr4_el1
-	mrs	x8, dbgwcr3_el1
-	mrs	x7, dbgwcr2_el1
-	mrs	x6, dbgwcr1_el1
-	mrs	x5, dbgwcr0_el1
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-
-1:
-	str	x20, [x3, #(15 * 8)]
-	str	x19, [x3, #(14 * 8)]
-	str	x18, [x3, #(13 * 8)]
-	str	x17, [x3, #(12 * 8)]
-	str	x16, [x3, #(11 * 8)]
-	str	x15, [x3, #(10 * 8)]
-	str	x14, [x3, #(9 * 8)]
-	str	x13, [x3, #(8 * 8)]
-	str	x12, [x3, #(7 * 8)]
-	str	x11, [x3, #(6 * 8)]
-	str	x10, [x3, #(5 * 8)]
-	str	x9, [x3, #(4 * 8)]
-	str	x8, [x3, #(3 * 8)]
-	str	x7, [x3, #(2 * 8)]
-	str	x6, [x3, #(1 * 8)]
-	str	x5, [x3, #(0 * 8)]
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
+	mrs	x21, \type\()15_el1
+	mrs	x20, \type\()14_el1
+	mrs	x19, \type\()13_el1
+	mrs	x18, \type\()12_el1
+	mrs	x17, \type\()11_el1
+	mrs	x16, \type\()10_el1
+	mrs	x15, \type\()9_el1
+	mrs	x14, \type\()8_el1
+	mrs	x13, \type\()7_el1
+	mrs	x12, \type\()6_el1
+	mrs	x11, \type\()5_el1
+	mrs	x10, \type\()4_el1
+	mrs	x9, \type\()3_el1
+	mrs	x8, \type\()2_el1
+	mrs	x7, \type\()1_el1
+	mrs	x6, \type\()0_el1
+
+	adr	x22, 1f
+	add	x22, x22, x5, lsl #2
+	br	x22
 1:
-	mrs	x20, dbgwvr15_el1
-	mrs	x19, dbgwvr14_el1
-	mrs	x18, dbgwvr13_el1
-	mrs	x17, dbgwvr12_el1
-	mrs	x16, dbgwvr11_el1
-	mrs	x15, dbgwvr10_el1
-	mrs	x14, dbgwvr9_el1
-	mrs	x13, dbgwvr8_el1
-	mrs	x12, dbgwvr7_el1
-	mrs	x11, dbgwvr6_el1
-	mrs	x10, dbgwvr5_el1
-	mrs	x9, dbgwvr4_el1
-	mrs	x8, dbgwvr3_el1
-	mrs	x7, dbgwvr2_el1
-	mrs	x6, dbgwvr1_el1
-	mrs	x5, dbgwvr0_el1
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-
-1:
-	str	x20, [x3, #(15 * 8)]
-	str	x19, [x3, #(14 * 8)]
-	str	x18, [x3, #(13 * 8)]
-	str	x17, [x3, #(12 * 8)]
-	str	x16, [x3, #(11 * 8)]
-	str	x15, [x3, #(10 * 8)]
-	str	x14, [x3, #(9 * 8)]
-	str	x13, [x3, #(8 * 8)]
-	str	x12, [x3, #(7 * 8)]
-	str	x11, [x3, #(6 * 8)]
-	str	x10, [x3, #(5 * 8)]
-	str	x9, [x3, #(4 * 8)]
-	str	x8, [x3, #(3 * 8)]
-	str	x7, [x3, #(2 * 8)]
-	str	x6, [x3, #(1 * 8)]
-	str	x5, [x3, #(0 * 8)]
-
-	mrs	x21, mdccint_el1
-	str	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
+	str	x21, [x4, #(15 * 8)]
+	str	x20, [x4, #(14 * 8)]
+	str	x19, [x4, #(13 * 8)]
+	str	x18, [x4, #(12 * 8)]
+	str	x17, [x4, #(11 * 8)]
+	str	x16, [x4, #(10 * 8)]
+	str	x15, [x4, #(9 * 8)]
+	str	x14, [x4, #(8 * 8)]
+	str	x13, [x4, #(7 * 8)]
+	str	x12, [x4, #(6 * 8)]
+	str	x11, [x4, #(5 * 8)]
+	str	x10, [x4, #(4 * 8)]
+	str	x9, [x4, #(3 * 8)]
+	str	x8, [x4, #(2 * 8)]
+	str	x7, [x4, #(1 * 8)]
+	str	x6, [x4, #(0 * 8)]
 .endm
 
 .macro restore_sysregs
@@ -465,195 +318,52 @@
 	msr	mdscr_el1,	x25
 .endm
 
-.macro restore_debug
-	// x2: base address for cpu context
-	// x3: tmp register
-
-	mrs	x26, id_aa64dfr0_el1
-	ubfx	x24, x26, #12, #4	// Extract BRPs
-	ubfx	x25, x26, #20, #4	// Extract WRPs
-	mov	w26, #15
-	sub	w24, w26, w24		// How many BPs to skip
-	sub	w25, w26, w25		// How many WPs to skip
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+.macro restore_debug type
+        // x4: pointer to register set
+        // x5: number of registers to skip
+	// x6..x22 trashed
 
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
+	adr	x22, 1f
+	add	x22, x22, x5, lsl #2
+	br	x22
 1:
-	ldr	x20, [x3, #(15 * 8)]
-	ldr	x19, [x3, #(14 * 8)]
-	ldr	x18, [x3, #(13 * 8)]
-	ldr	x17, [x3, #(12 * 8)]
-	ldr	x16, [x3, #(11 * 8)]
-	ldr	x15, [x3, #(10 * 8)]
-	ldr	x14, [x3, #(9 * 8)]
-	ldr	x13, [x3, #(8 * 8)]
-	ldr	x12, [x3, #(7 * 8)]
-	ldr	x11, [x3, #(6 * 8)]
-	ldr	x10, [x3, #(5 * 8)]
-	ldr	x9, [x3, #(4 * 8)]
-	ldr	x8, [x3, #(3 * 8)]
-	ldr	x7, [x3, #(2 * 8)]
-	ldr	x6, [x3, #(1 * 8)]
-	ldr	x5, [x3, #(0 * 8)]
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
+	ldr	x21, [x4, #(15 * 8)]
+	ldr	x20, [x4, #(14 * 8)]
+	ldr	x19, [x4, #(13 * 8)]
+	ldr	x18, [x4, #(12 * 8)]
+	ldr	x17, [x4, #(11 * 8)]
+	ldr	x16, [x4, #(10 * 8)]
+	ldr	x15, [x4, #(9 * 8)]
+	ldr	x14, [x4, #(8 * 8)]
+	ldr	x13, [x4, #(7 * 8)]
+	ldr	x12, [x4, #(6 * 8)]
+	ldr	x11, [x4, #(5 * 8)]
+	ldr	x10, [x4, #(4 * 8)]
+	ldr	x9, [x4, #(3 * 8)]
+	ldr	x8, [x4, #(2 * 8)]
+	ldr	x7, [x4, #(1 * 8)]
+	ldr	x6, [x4, #(0 * 8)]
+
+	adr	x22, 1f
+	add	x22, x22, x5, lsl #2
+	br	x22
 1:
-	msr	dbgbcr15_el1, x20
-	msr	dbgbcr14_el1, x19
-	msr	dbgbcr13_el1, x18
-	msr	dbgbcr12_el1, x17
-	msr	dbgbcr11_el1, x16
-	msr	dbgbcr10_el1, x15
-	msr	dbgbcr9_el1, x14
-	msr	dbgbcr8_el1, x13
-	msr	dbgbcr7_el1, x12
-	msr	dbgbcr6_el1, x11
-	msr	dbgbcr5_el1, x10
-	msr	dbgbcr4_el1, x9
-	msr	dbgbcr3_el1, x8
-	msr	dbgbcr2_el1, x7
-	msr	dbgbcr1_el1, x6
-	msr	dbgbcr0_el1, x5
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-1:
-	ldr	x20, [x3, #(15 * 8)]
-	ldr	x19, [x3, #(14 * 8)]
-	ldr	x18, [x3, #(13 * 8)]
-	ldr	x17, [x3, #(12 * 8)]
-	ldr	x16, [x3, #(11 * 8)]
-	ldr	x15, [x3, #(10 * 8)]
-	ldr	x14, [x3, #(9 * 8)]
-	ldr	x13, [x3, #(8 * 8)]
-	ldr	x12, [x3, #(7 * 8)]
-	ldr	x11, [x3, #(6 * 8)]
-	ldr	x10, [x3, #(5 * 8)]
-	ldr	x9, [x3, #(4 * 8)]
-	ldr	x8, [x3, #(3 * 8)]
-	ldr	x7, [x3, #(2 * 8)]
-	ldr	x6, [x3, #(1 * 8)]
-	ldr	x5, [x3, #(0 * 8)]
-
-	adr	x26, 1f
-	add	x26, x26, x24, lsl #2
-	br	x26
-1:
-	msr	dbgbvr15_el1, x20
-	msr	dbgbvr14_el1, x19
-	msr	dbgbvr13_el1, x18
-	msr	dbgbvr12_el1, x17
-	msr	dbgbvr11_el1, x16
-	msr	dbgbvr10_el1, x15
-	msr	dbgbvr9_el1, x14
-	msr	dbgbvr8_el1, x13
-	msr	dbgbvr7_el1, x12
-	msr	dbgbvr6_el1, x11
-	msr	dbgbvr5_el1, x10
-	msr	dbgbvr4_el1, x9
-	msr	dbgbvr3_el1, x8
-	msr	dbgbvr2_el1, x7
-	msr	dbgbvr1_el1, x6
-	msr	dbgbvr0_el1, x5
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-1:
-	ldr	x20, [x3, #(15 * 8)]
-	ldr	x19, [x3, #(14 * 8)]
-	ldr	x18, [x3, #(13 * 8)]
-	ldr	x17, [x3, #(12 * 8)]
-	ldr	x16, [x3, #(11 * 8)]
-	ldr	x15, [x3, #(10 * 8)]
-	ldr	x14, [x3, #(9 * 8)]
-	ldr	x13, [x3, #(8 * 8)]
-	ldr	x12, [x3, #(7 * 8)]
-	ldr	x11, [x3, #(6 * 8)]
-	ldr	x10, [x3, #(5 * 8)]
-	ldr	x9, [x3, #(4 * 8)]
-	ldr	x8, [x3, #(3 * 8)]
-	ldr	x7, [x3, #(2 * 8)]
-	ldr	x6, [x3, #(1 * 8)]
-	ldr	x5, [x3, #(0 * 8)]
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-1:
-	msr	dbgwcr15_el1, x20
-	msr	dbgwcr14_el1, x19
-	msr	dbgwcr13_el1, x18
-	msr	dbgwcr12_el1, x17
-	msr	dbgwcr11_el1, x16
-	msr	dbgwcr10_el1, x15
-	msr	dbgwcr9_el1, x14
-	msr	dbgwcr8_el1, x13
-	msr	dbgwcr7_el1, x12
-	msr	dbgwcr6_el1, x11
-	msr	dbgwcr5_el1, x10
-	msr	dbgwcr4_el1, x9
-	msr	dbgwcr3_el1, x8
-	msr	dbgwcr2_el1, x7
-	msr	dbgwcr1_el1, x6
-	msr	dbgwcr0_el1, x5
-
-	add	x3, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-1:
-	ldr	x20, [x3, #(15 * 8)]
-	ldr	x19, [x3, #(14 * 8)]
-	ldr	x18, [x3, #(13 * 8)]
-	ldr	x17, [x3, #(12 * 8)]
-	ldr	x16, [x3, #(11 * 8)]
-	ldr	x15, [x3, #(10 * 8)]
-	ldr	x14, [x3, #(9 * 8)]
-	ldr	x13, [x3, #(8 * 8)]
-	ldr	x12, [x3, #(7 * 8)]
-	ldr	x11, [x3, #(6 * 8)]
-	ldr	x10, [x3, #(5 * 8)]
-	ldr	x9, [x3, #(4 * 8)]
-	ldr	x8, [x3, #(3 * 8)]
-	ldr	x7, [x3, #(2 * 8)]
-	ldr	x6, [x3, #(1 * 8)]
-	ldr	x5, [x3, #(0 * 8)]
-
-	adr	x26, 1f
-	add	x26, x26, x25, lsl #2
-	br	x26
-1:
-	msr	dbgwvr15_el1, x20
-	msr	dbgwvr14_el1, x19
-	msr	dbgwvr13_el1, x18
-	msr	dbgwvr12_el1, x17
-	msr	dbgwvr11_el1, x16
-	msr	dbgwvr10_el1, x15
-	msr	dbgwvr9_el1, x14
-	msr	dbgwvr8_el1, x13
-	msr	dbgwvr7_el1, x12
-	msr	dbgwvr6_el1, x11
-	msr	dbgwvr5_el1, x10
-	msr	dbgwvr4_el1, x9
-	msr	dbgwvr3_el1, x8
-	msr	dbgwvr2_el1, x7
-	msr	dbgwvr1_el1, x6
-	msr	dbgwvr0_el1, x5
-
-	ldr	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
-	msr	mdccint_el1, x21
+	msr	\type\()15_el1, x21
+	msr	\type\()14_el1, x20
+	msr	\type\()13_el1, x19
+	msr	\type\()12_el1, x18
+	msr	\type\()11_el1, x17
+	msr	\type\()10_el1, x16
+	msr	\type\()9_el1, x15
+	msr	\type\()8_el1, x14
+	msr	\type\()7_el1, x13
+	msr	\type\()6_el1, x12
+	msr	\type\()5_el1, x11
+	msr	\type\()4_el1, x10
+	msr	\type\()3_el1, x9
+	msr	\type\()2_el1, x8
+	msr	\type\()1_el1, x7
+	msr	\type\()0_el1, x6
 .endm
 
 .macro skip_32bit_state tmp, target
@@ -887,12 +597,63 @@ __restore_sysregs:
 	restore_sysregs
 	ret
 
+/* Save debug state */
 __save_debug:
-	save_debug
+	// x0: base address for vcpu context
+	// x2: ptr to current CPU context
+	// x4/x5: trashed
+
+	mrs	x26, id_aa64dfr0_el1
+	ubfx	x24, x26, #12, #4	// Extract BRPs
+	ubfx	x25, x26, #20, #4	// Extract WRPs
+	mov	w26, #15
+	sub	w24, w26, w24		// How many BPs to skip
+	sub	w25, w26, w25		// How many WPs to skip
+
+	mov     x5, x24
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+	save_debug dbgbcr
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
+	save_debug dbgbvr
+
+	mov     x5, x25
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
+	save_debug dbgwcr
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
+	save_debug dbgwvr
+
+	mrs	x21, mdccint_el1
+	str	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
 	ret
 
+/* Restore debug state */
 __restore_debug:
-	restore_debug
+	// x0: base address for cpu context
+	// x2: ptr to current CPU context
+	// x4/x5: trashed
+
+	mrs	x26, id_aa64dfr0_el1
+	ubfx	x24, x26, #12, #4	// Extract BRPs
+	ubfx	x25, x26, #20, #4	// Extract WRPs
+	mov	w26, #15
+	sub	w24, w26, w24		// How many BPs to skip
+	sub	w25, w26, w25		// How many WPs to skip
+
+	mov     x5, x24
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBCR0_EL1)
+	restore_debug dbgbcr
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGBVR0_EL1)
+	restore_debug dbgbvr
+
+	mov     x5, x25
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWCR0_EL1)
+	restore_debug dbgwcr
+	add	x4, x2, #CPU_SYSREG_OFFSET(DBGWVR0_EL1)
+	restore_debug dbgwvr
+
+	ldr	x21, [x2, #CPU_SYSREG_OFFSET(MDCCINT_EL1)]
+	msr	mdccint_el1, x21
+
 	ret
 
 __save_fpsimd:
-- 
2.4.1

  parent reply	other threads:[~2015-05-29  9:30 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2015-05-29  9:30 [PATCH v5 00/12] KVM Guest Debug support for arm64 Alex Bennée
2015-05-29  9:30 ` [PATCH v5 01/12] KVM: add comments for kvm_debug_exit_arch struct Alex Bennée
2015-05-29  9:30 ` [PATCH v5 02/12] KVM: arm64: fix misleading comments in save/restore Alex Bennée
2015-05-29  9:30 ` [PATCH v5 03/12] KVM: arm64: guest debug, define API headers Alex Bennée
2015-06-04 11:07   ` Christoffer Dall
2015-06-04 13:49     ` Alex Bennée
2015-06-04 14:40       ` Andrew Jones
2015-05-29  9:30 ` [PATCH v5 04/12] KVM: arm: guest debug, add stub KVM_SET_GUEST_DEBUG ioctl Alex Bennée
2015-05-29  9:30 ` [PATCH v5 05/12] KVM: arm: introduce kvm_arm_init/setup/clear_debug Alex Bennée
2015-06-04 11:07   ` Christoffer Dall
2015-05-29  9:30 ` [PATCH v5 06/12] KVM: arm64: guest debug, add SW break point support Alex Bennée
2015-05-29  9:30 ` [PATCH v5 07/12] KVM: arm64: guest debug, add support for single-step Alex Bennée
2015-06-04 11:07   ` Christoffer Dall
2015-06-04 13:46     ` Alex Bennée
2015-05-29  9:30 ` Alex Bennée [this message]
2015-06-04 10:23   ` [PATCH v5 08/12] KVM: arm64: re-factor hyp.S debug register code Christoffer Dall
2015-06-04 10:34     ` Alex Bennée
2015-06-04 11:12       ` Christoffer Dall
2015-05-29  9:30 ` [PATCH v5 09/12] KVM: arm64: introduce vcpu->arch.debug_ptr Alex Bennée
2015-06-04 10:56   ` Christoffer Dall
2015-05-29  9:30 ` [PATCH v5 10/12] KVM: arm64: guest debug, HW assisted debug support Alex Bennée
2015-06-01  9:15   ` Will Deacon
2015-06-01 12:41     ` Alex Bennée
2015-06-04 11:06   ` Christoffer Dall
2015-05-29  9:30 ` [PATCH v5 11/12] KVM: arm64: enable KVM_CAP_SET_GUEST_DEBUG Alex Bennée
2015-05-29  9:30 ` [PATCH v5 12/12] KVM: arm64: add trace points for guest_debug debug Alex Bennée

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1432891828-4816-9-git-send-email-alex.bennee@linaro.org \
    --to=alex.bennee@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).