From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 4/6] ARM: dts: sun8i: Add sun8i-a33 dtsi
Date: Sat, 30 May 2015 16:55:04 +0200 [thread overview]
Message-ID: <1432997706-20172-5-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1432997706-20172-1-git-send-email-hdegoede@redhat.com>
From: Vishnu Patekar <vishnupatekar0510@gmail.com>
Add a dtsi file for use with a33 based boards based on the new
sun8i-a23-a33.dtsi file.
Signed-off-by: Vishnu Patekar <vishnupatekar0510@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
Changes in v2:
-Use the new merged sun8i-a23-a33.dtsi file
---
arch/arm/boot/dts/sun8i-a33.dtsi | 89 ++++++++++++++++++++++++++++++++++++++++
1 file changed, 89 insertions(+)
create mode 100644 arch/arm/boot/dts/sun8i-a33.dtsi
diff --git a/arch/arm/boot/dts/sun8i-a33.dtsi b/arch/arm/boot/dts/sun8i-a33.dtsi
new file mode 100644
index 0000000..9b43bc6
--- /dev/null
+++ b/arch/arm/boot/dts/sun8i-a33.dtsi
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2014 Chen-Yu Tsai
+ *
+ * Chen-Yu Tsai <wens@csie.org>
+ *
+ * This file is dual-licensed: you can use it either under the terms
+ * of the GPL or the X11 license, at your option. Note that this dual
+ * licensing only applies to this file, and not this project as a
+ * whole.
+ *
+ * a) This file is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
+ *
+ * This file is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * Or, alternatively,
+ *
+ * b) Permission is hereby granted, free of charge, to any person
+ * obtaining a copy of this software and associated documentation
+ * files (the "Software"), to deal in the Software without
+ * restriction, including without limitation the rights to use,
+ * copy, modify, merge, publish, distribute, sublicense, and/or
+ * sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following
+ * conditions:
+ *
+ * The above copyright notice and this permission notice shall be
+ * included in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
+ * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
+ * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
+ * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+ * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ */
+
+#include "sun8i-a23-a33.dtsi"
+
+/ {
+ cpus {
+ cpu at 2 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <2>;
+ };
+
+ cpu at 3 {
+ compatible = "arm,cortex-a7";
+ device_type = "cpu";
+ reg = <3>;
+ };
+ };
+
+ memory {
+ reg = <0x40000000 0x80000000>;
+ };
+
+ clocks {
+ /* Dummy clock for pll11 (DDR1) until actually implemented */
+ pll11: pll11_clk {
+ #clock-cells = <0>;
+ compatible = "fixed-clock";
+ clock-frequency = <0>;
+ clock-output-names = "pll11";
+ };
+
+ mbus_clk: clk at 01c2015c {
+ #clock-cells = <0>;
+ compatible = "allwinner,sun8i-a23-mbus-clk";
+ reg = <0x01c2015c 0x4>;
+ clocks = <&osc24M>, <&pll6 1>, <&pll5>, <&pll11>;
+ clock-output-names = "mbus";
+ };
+ };
+};
+
+&pio {
+ compatible = "allwinner,sun8i-a33-pinctrl";
+ interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+};
--
2.4.1
next prev parent reply other threads:[~2015-05-30 14:55 UTC|newest]
Thread overview: 33+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-30 14:55 [PATCH v2 0/6] Introduce Allwinner A33 support Hans de Goede
2015-05-30 14:55 ` [PATCH v2 1/6] ARM: sunxi: Add Machine support for A33 Hans de Goede
2015-06-02 7:28 ` Maxime Ripard
2015-05-30 14:55 ` [PATCH v2 2/6] pinctrl: sunxi: Add allwinner A33 PIO controller support Hans de Goede
2015-05-30 14:55 ` [PATCH v2 3/6] ARM: dts: sun8i: Add sun8i-a23-a33 dtsi Hans de Goede
2015-06-02 7:51 ` Maxime Ripard
2015-06-02 8:08 ` Hans de Goede
2015-06-02 8:21 ` Maxime Ripard
2015-05-30 14:55 ` Hans de Goede [this message]
2015-06-02 7:55 ` [PATCH v2 4/6] ARM: dts: sun8i: Add sun8i-a33 dtsi Maxime Ripard
2015-05-30 14:55 ` [PATCH v2 5/6] ARM: dts: sun8i: Add ET-Q8 A33 support Hans de Goede
2015-06-02 7:56 ` Maxime Ripard
2015-05-30 14:55 ` [PATCH v2 6/6] ARM: sun8i: dts: Add Ippo-q8h v1.2 with A33 and 1024x600 lcd support Hans de Goede
2015-06-02 8:14 ` Maxime Ripard
2015-06-02 8:29 ` Hans de Goede
2015-06-03 9:45 ` Maxime Ripard
2015-06-03 11:12 ` Hans de Goede
2015-06-13 13:50 ` Maxime Ripard
2015-06-13 14:18 ` Hans de Goede
2015-06-16 17:41 ` Maxime Ripard
2015-06-17 7:16 ` Hans de Goede
2015-06-18 18:37 ` Maxime Ripard
2015-06-18 20:16 ` Hans de Goede
2015-06-14 18:16 ` Pantelis Antoniou
2015-06-16 17:55 ` Maxime Ripard
2015-06-16 19:33 ` Pantelis Antoniou
2015-06-17 7:19 ` Hans de Goede
2015-06-17 7:26 ` Pantelis Antoniou
2015-06-17 7:16 ` Hans de Goede
2015-06-18 17:52 ` Maxime Ripard
2015-05-30 20:43 ` [linux-sunxi] [PATCH v2 0/6] Introduce Allwinner A33 support jonsmirl at gmail.com
2015-06-02 7:43 ` Chen-Yu Tsai
2016-06-13 19:10 ` ernestovm07 at gmail.com
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1432997706-20172-5-git-send-email-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).