[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Jun Nie]

Changes vs v5:
  - Remove redundant code and polish return value in clock driver.

Changes vs v4:
  - Fix issues in clock driver that Stephen found.
  - Remove initramfs in defconfig to avoid overriding test config.
  - Drop patches that already merged into ARM next/soc.

Jun Nie (4):
  dt-bindings: Add #defines for ZTE ZX296702 clocks
  clk: zx: add clock support to zx296702
  ARM: dts: zx: add an initial zx296702 dts and doc
  ARM: zx: Add basic defconfig support for ZX296702

 Documentation/devicetree/bindings/arm/zte.txt      |  15 +
 .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++
 Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/zx296702-ad1.dts                 |  48 ++
 arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++
 arch/arm/configs/zx_defconfig                      | 129 ++++
 drivers/clk/Makefile                               |   1 +
 drivers/clk/zte/Makefile                           |   2 +
 drivers/clk/zte/clk-pll.c                          | 172 ++++++
 drivers/clk/zte/clk-zx296702.c                     | 657 +++++++++++++++++++++
 drivers/clk/zte/clk.h                              |  32 +
 include/dt-bindings/clock/zx296702-clock.h         | 170 ++++++
 14 files changed, 1403 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
 create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
 create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
 create mode 100644 arch/arm/boot/dts/zx296702.dtsi
 create mode 100644 arch/arm/configs/zx_defconfig
 create mode 100644 drivers/clk/zte/Makefile
 create mode 100644 drivers/clk/zte/clk-pll.c
 create mode 100644 drivers/clk/zte/clk-zx296702.c
 create mode 100644 drivers/clk/zte/clk.h
 create mode 100644 include/dt-bindings/clock/zx296702-clock.h

-- 
1.9.1

[PATCH v6 1/4] dt-bindings: Add #defines for ZTE ZX296702 clocks

[Jun Nie]

Add clocks defines for the global clock controller
found on ZTE ZX296702 SoCs.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
Acked-by: Stephen Boyd <sboyd@codeaurora.org>
---
 include/dt-bindings/clock/zx296702-clock.h | 170 +++++++++++++++++++++++++++++
 1 file changed, 170 insertions(+)
 create mode 100644 include/dt-bindings/clock/zx296702-clock.h

diff --git a/include/dt-bindings/clock/zx296702-clock.h b/include/dt-bindings/clock/zx296702-clock.h
new file mode 100644
index 0000000..e683dbb
--- /dev/null
+++ b/include/dt-bindings/clock/zx296702-clock.h
@@ -0,0 +1,170 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_ZX296702_H
+#define __DT_BINDINGS_CLOCK_ZX296702_H
+
+#define ZX296702_OSC				0
+#define ZX296702_PLL_A9				1
+#define ZX296702_PLL_A9_350M			2
+#define ZX296702_PLL_MAC_1000M			3
+#define ZX296702_PLL_MAC_333M			4
+#define ZX296702_PLL_MM0_1188M			5
+#define ZX296702_PLL_MM0_396M			6
+#define ZX296702_PLL_MM0_198M			7
+#define ZX296702_PLL_MM1_108M			8
+#define ZX296702_PLL_MM1_72M			9
+#define ZX296702_PLL_MM1_54M			10
+#define ZX296702_PLL_LSP_104M			11
+#define ZX296702_PLL_LSP_26M			12
+#define ZX296702_PLL_AUDIO_294M912		13
+#define ZX296702_PLL_DDR_266M			14
+#define ZX296702_CLK_148M5			15
+#define ZX296702_MATRIX_ACLK			16
+#define ZX296702_MAIN_HCLK			17
+#define ZX296702_MAIN_PCLK			18
+#define ZX296702_CLK_500			19
+#define ZX296702_CLK_250			20
+#define ZX296702_CLK_125			21
+#define ZX296702_CLK_74M25			22
+#define ZX296702_A9_WCLK			23
+#define ZX296702_A9_AS1_ACLK_MUX		24
+#define ZX296702_A9_TRACE_CLKIN_MUX		25
+#define ZX296702_A9_AS1_ACLK_DIV		26
+#define ZX296702_CLK_2				27
+#define ZX296702_CLK_27				28
+#define ZX296702_DECPPU_ACLK_MUX		29
+#define ZX296702_PPU_ACLK_MUX			30
+#define ZX296702_MALI400_ACLK_MUX		31
+#define ZX296702_VOU_ACLK_MUX			32
+#define ZX296702_VOU_MAIN_WCLK_MUX		33
+#define ZX296702_VOU_AUX_WCLK_MUX		34
+#define ZX296702_VOU_SCALER_WCLK_MUX		35
+#define ZX296702_R2D_ACLK_MUX			36
+#define ZX296702_R2D_WCLK_MUX			37
+#define ZX296702_CLK_50				38
+#define ZX296702_CLK_25				39
+#define ZX296702_CLK_12				40
+#define ZX296702_CLK_16M384			41
+#define ZX296702_CLK_32K768			42
+#define ZX296702_SEC_WCLK_DIV			43
+#define ZX296702_DDR_WCLK_MUX			44
+#define ZX296702_NAND_WCLK_MUX			45
+#define ZX296702_LSP_26_WCLK_MUX		46
+#define ZX296702_A9_AS0_ACLK			47
+#define ZX296702_A9_AS1_ACLK			48
+#define ZX296702_A9_TRACE_CLKIN			49
+#define ZX296702_DECPPU_AXI_M_ACLK		50
+#define ZX296702_DECPPU_AHB_S_HCLK		51
+#define ZX296702_PPU_AXI_M_ACLK			52
+#define ZX296702_PPU_AHB_S_HCLK			53
+#define ZX296702_VOU_AXI_M_ACLK			54
+#define ZX296702_VOU_APB_PCLK			55
+#define ZX296702_VOU_MAIN_CHANNEL_WCLK		56
+#define ZX296702_VOU_AUX_CHANNEL_WCLK		57
+#define ZX296702_VOU_HDMI_OSCLK_CEC		58
+#define ZX296702_VOU_SCALER_WCLK		59
+#define ZX296702_MALI400_AXI_M_ACLK		60
+#define ZX296702_MALI400_APB_PCLK		61
+#define ZX296702_R2D_WCLK			62
+#define ZX296702_R2D_AXI_M_ACLK			63
+#define ZX296702_R2D_AHB_HCLK			64
+#define ZX296702_DDR3_AXI_S0_ACLK		65
+#define ZX296702_DDR3_APB_PCLK			66
+#define ZX296702_DDR3_WCLK			67
+#define ZX296702_USB20_0_AHB_HCLK		68
+#define ZX296702_USB20_0_EXTREFCLK		69
+#define ZX296702_USB20_1_AHB_HCLK		70
+#define ZX296702_USB20_1_EXTREFCLK		71
+#define ZX296702_USB20_2_AHB_HCLK		72
+#define ZX296702_USB20_2_EXTREFCLK		73
+#define ZX296702_GMAC_AXI_M_ACLK		74
+#define ZX296702_GMAC_APB_PCLK			75
+#define ZX296702_GMAC_125_CLKIN			76
+#define ZX296702_GMAC_RMII_CLKIN		77
+#define ZX296702_GMAC_25M_CLK			78
+#define ZX296702_NANDFLASH_AHB_HCLK		79
+#define ZX296702_NANDFLASH_WCLK			80
+#define ZX296702_LSP0_APB_PCLK			81
+#define ZX296702_LSP0_AHB_HCLK			82
+#define ZX296702_LSP0_26M_WCLK			83
+#define ZX296702_LSP0_104M_WCLK			84
+#define ZX296702_LSP0_16M384_WCLK		85
+#define ZX296702_LSP1_APB_PCLK			86
+#define ZX296702_LSP1_26M_WCLK			87
+#define ZX296702_LSP1_104M_WCLK			88
+#define ZX296702_LSP1_32K_CLK			89
+#define ZX296702_AON_HCLK			90
+#define ZX296702_SYS_CTRL_PCLK			91
+#define ZX296702_DMA_PCLK			92
+#define ZX296702_DMA_ACLK			93
+#define ZX296702_SEC_HCLK			94
+#define ZX296702_AES_WCLK			95
+#define ZX296702_DES_WCLK			96
+#define ZX296702_IRAM_ACLK			97
+#define ZX296702_IROM_ACLK			98
+#define ZX296702_BOOT_CTRL_HCLK			99
+#define ZX296702_EFUSE_CLK_30			100
+#define ZX296702_VOU_MAIN_CHANNEL_DIV		101
+#define ZX296702_VOU_AUX_CHANNEL_DIV		102
+#define ZX296702_VOU_TV_ENC_HD_DIV		103
+#define ZX296702_VOU_TV_ENC_SD_DIV		104
+#define ZX296702_VL0_MUX			105
+#define ZX296702_VL1_MUX			106
+#define ZX296702_VL2_MUX			107
+#define ZX296702_GL0_MUX			108
+#define ZX296702_GL1_MUX			109
+#define ZX296702_GL2_MUX			110
+#define ZX296702_WB_MUX				111
+#define ZX296702_HDMI_MUX			112
+#define ZX296702_VOU_TV_ENC_HD_MUX		113
+#define ZX296702_VOU_TV_ENC_SD_MUX		114
+#define ZX296702_VL0_CLK			115
+#define ZX296702_VL1_CLK			116
+#define ZX296702_VL2_CLK			117
+#define ZX296702_GL0_CLK			118
+#define ZX296702_GL1_CLK			119
+#define ZX296702_GL2_CLK			120
+#define ZX296702_WB_CLK				121
+#define ZX296702_CL_CLK				122
+#define ZX296702_MAIN_MIX_CLK			123
+#define ZX296702_AUX_MIX_CLK			124
+#define ZX296702_HDMI_CLK			125
+#define ZX296702_VOU_TV_ENC_HD_DAC_CLK		126
+#define ZX296702_VOU_TV_ENC_SD_DAC_CLK		127
+#define ZX296702_A9_PERIPHCLK			128
+#define ZX296702_TOPCLK_END			129
+
+#define ZX296702_SDMMC1_WCLK_MUX		0
+#define ZX296702_SDMMC1_WCLK_DIV		1
+#define ZX296702_SDMMC1_WCLK			2
+#define ZX296702_SDMMC1_PCLK			3
+#define ZX296702_SPDIF0_WCLK_MUX		4
+#define ZX296702_SPDIF0_WCLK			5
+#define ZX296702_SPDIF0_PCLK			6
+#define ZX296702_SPDIF0_DIV			7
+#define ZX296702_I2S0_WCLK_MUX			8
+#define ZX296702_I2S0_WCLK			9
+#define ZX296702_I2S0_PCLK			10
+#define ZX296702_I2S0_DIV			11
+#define ZX296702_LSP0CLK_END			12
+
+#define ZX296702_UART0_WCLK_MUX			0
+#define ZX296702_UART0_WCLK			1
+#define ZX296702_UART0_PCLK			2
+#define ZX296702_UART1_WCLK_MUX			3
+#define ZX296702_UART1_WCLK			4
+#define ZX296702_UART1_PCLK			5
+#define ZX296702_SDMMC0_WCLK_MUX		6
+#define ZX296702_SDMMC0_WCLK_DIV		7
+#define ZX296702_SDMMC0_WCLK			8
+#define ZX296702_SDMMC0_PCLK			9
+#define ZX296702_LSP1CLK_END			10
+
+#endif /* __DT_BINDINGS_CLOCK_ZX296702_H */
-- 
1.9.1

[PATCH v6 2/4] clk: zx: add clock support to zx296702

[Jun Nie]

It adds a clock driver for zx296702 SoC to register the clock tree to
Common Clock Framework.  All the clocks of bus topology and some the
peripheral clocks are ready with this commit. Some missing leaf clocks
for peripherals will be added later when needed.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 drivers/clk/Makefile           |   1 +
 drivers/clk/zte/Makefile       |   2 +
 drivers/clk/zte/clk-pll.c      | 172 +++++++++++
 drivers/clk/zte/clk-zx296702.c | 657 +++++++++++++++++++++++++++++++++++++++++
 drivers/clk/zte/clk.h          |  32 ++
 5 files changed, 864 insertions(+)
 create mode 100644 drivers/clk/zte/Makefile
 create mode 100644 drivers/clk/zte/clk-pll.c
 create mode 100644 drivers/clk/zte/clk-zx296702.c
 create mode 100644 drivers/clk/zte/clk.h

diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile
index 3d00c25..f4c68be 100644
--- a/drivers/clk/Makefile
+++ b/drivers/clk/Makefile
@@ -72,4 +72,5 @@ obj-$(CONFIG_ARCH_OMAP2PLUS)		+= ti/
 obj-$(CONFIG_ARCH_U8500)		+= ux500/
 obj-$(CONFIG_COMMON_CLK_VERSATILE)	+= versatile/
 obj-$(CONFIG_X86)			+= x86/
+obj-$(CONFIG_ARCH_ZX)			+= zte/
 obj-$(CONFIG_ARCH_ZYNQ)			+= zynq/
diff --git a/drivers/clk/zte/Makefile b/drivers/clk/zte/Makefile
new file mode 100644
index 0000000..95b707c
--- /dev/null
+++ b/drivers/clk/zte/Makefile
@@ -0,0 +1,2 @@
+obj-y := clk-pll.o
+obj-$(CONFIG_SOC_ZX296702) += clk-zx296702.o
diff --git a/drivers/clk/zte/clk-pll.c b/drivers/clk/zte/clk-pll.c
new file mode 100644
index 0000000..c3b221a
--- /dev/null
+++ b/drivers/clk/zte/clk-pll.c
@@ -0,0 +1,172 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/err.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/slab.h>
+#include <linux/spinlock.h>
+
+#include "clk.h"
+
+#define to_clk_zx_pll(_hw) container_of(_hw, struct clk_zx_pll, hw)
+
+#define CFG0_CFG1_OFFSET 4
+#define LOCK_FLAG BIT(30)
+#define POWER_DOWN BIT(31)
+
+static int rate_to_idx(struct clk_zx_pll *zx_pll, unsigned long rate)
+{
+	const struct zx_pll_config *config = zx_pll->lookup_table;
+	int i;
+
+	for (i = 0; i < zx_pll->count; i++) {
+		if (config[i].rate > rate)
+			return i > 0 ? i - 1 : 0;
+
+		if (config[i].rate == rate)
+			return i;
+	}
+
+	return i - 1;
+}
+
+static int hw_to_idx(struct clk_zx_pll *zx_pll)
+{
+	const struct zx_pll_config *config = zx_pll->lookup_table;
+	u32 hw_cfg0, hw_cfg1;
+	int i;
+
+	hw_cfg0 = readl_relaxed(zx_pll->reg_base);
+	hw_cfg1 = readl_relaxed(zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+	/* For matching the value in lookup table */
+	hw_cfg0 &= ~LOCK_FLAG;
+	hw_cfg0 |= POWER_DOWN;
+
+	for (i = 0; i < zx_pll->count; i++) {
+		if (hw_cfg0 == config[i].cfg0 && hw_cfg1 == config[i].cfg1)
+			return i;
+	}
+
+	return -EINVAL;
+}
+
+static unsigned long zx_pll_recalc_rate(struct clk_hw *hw,
+					unsigned long parent_rate)
+{
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	int idx;
+
+	idx = hw_to_idx(zx_pll);
+	if (unlikely(idx == -EINVAL))
+		return 0;
+
+	return zx_pll->lookup_table[idx].rate;
+}
+
+static long zx_pll_round_rate(struct clk_hw *hw, unsigned long rate,
+			      unsigned long *prate)
+{
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	int idx;
+
+	idx = rate_to_idx(zx_pll, rate);
+
+	return zx_pll->lookup_table[idx].rate;
+}
+
+static int zx_pll_set_rate(struct clk_hw *hw, unsigned long rate,
+			   unsigned long parent_rate)
+{
+	/* Assume current cpu is not running on current PLL */
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	const struct zx_pll_config *config;
+	int idx;
+
+	idx = rate_to_idx(zx_pll, rate);
+	config = &zx_pll->lookup_table[idx];
+
+	writel_relaxed(config->cfg0, zx_pll->reg_base);
+	writel_relaxed(config->cfg1, zx_pll->reg_base + CFG0_CFG1_OFFSET);
+
+	return 0;
+}
+
+static int zx_pll_enable(struct clk_hw *hw)
+{
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	u32 reg;
+
+	reg = readl_relaxed(zx_pll->reg_base);
+	writel_relaxed(reg & ~POWER_DOWN, zx_pll->reg_base);
+
+	return readl_relaxed_poll_timeout(zx_pll->reg_base, reg,
+					  reg & LOCK_FLAG, 0, 100);
+}
+
+static void zx_pll_disable(struct clk_hw *hw)
+{
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	u32 reg;
+
+	reg = readl_relaxed(zx_pll->reg_base);
+	writel_relaxed(reg | POWER_DOWN, zx_pll->reg_base);
+}
+
+static int zx_pll_is_enabled(struct clk_hw *hw)
+{
+	struct clk_zx_pll *zx_pll = to_clk_zx_pll(hw);
+	u32 reg;
+
+	reg = readl_relaxed(zx_pll->reg_base);
+
+	return !(reg & POWER_DOWN);
+}
+
+static const struct clk_ops zx_pll_ops = {
+	.recalc_rate = zx_pll_recalc_rate,
+	.round_rate = zx_pll_round_rate,
+	.set_rate = zx_pll_set_rate,
+	.enable = zx_pll_enable,
+	.disable = zx_pll_disable,
+	.is_enabled = zx_pll_is_enabled,
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+	unsigned long flags, void __iomem *reg_base,
+	const struct zx_pll_config *lookup_table, int count, spinlock_t *lock)
+{
+	struct clk_zx_pll *zx_pll;
+	struct clk *clk;
+	struct clk_init_data init;
+
+	zx_pll = kzalloc(sizeof(*zx_pll), GFP_KERNEL);
+	if (!zx_pll)
+		return ERR_PTR(-ENOMEM);
+
+	init.name = name;
+	init.ops = &zx_pll_ops;
+	init.flags = flags;
+	init.parent_names = parent_name ? &parent_name : NULL;
+	init.num_parents = parent_name ? 1 : 0;
+
+	zx_pll->reg_base = reg_base;
+	zx_pll->lookup_table = lookup_table;
+	zx_pll->count = count;
+	zx_pll->lock = lock;
+	zx_pll->hw.init = &init;
+
+	clk = clk_register(NULL, &zx_pll->hw);
+	if (IS_ERR(clk))
+		kfree(zx_pll);
+
+	return clk;
+}
diff --git a/drivers/clk/zte/clk-zx296702.c b/drivers/clk/zte/clk-zx296702.c
new file mode 100644
index 0000000..929d033
--- /dev/null
+++ b/drivers/clk/zte/clk-zx296702.c
@@ -0,0 +1,657 @@
+/*
+ * Copyright 2014 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk-provider.h>
+#include <linux/of_address.h>
+#include <dt-bindings/clock/zx296702-clock.h>
+#include "clk.h"
+
+static DEFINE_SPINLOCK(reg_lock);
+
+static void __iomem *topcrm_base;
+static void __iomem *lsp0crpm_base;
+static void __iomem *lsp1crpm_base;
+
+static struct clk *topclk[ZX296702_TOPCLK_END];
+static struct clk *lsp0clk[ZX296702_LSP0CLK_END];
+static struct clk *lsp1clk[ZX296702_LSP1CLK_END];
+
+static struct clk_onecell_data topclk_data;
+static struct clk_onecell_data lsp0clk_data;
+static struct clk_onecell_data lsp1clk_data;
+
+#define CLK_MUX			(topcrm_base + 0x04)
+#define CLK_DIV			(topcrm_base + 0x08)
+#define CLK_EN0			(topcrm_base + 0x0c)
+#define CLK_EN1			(topcrm_base + 0x10)
+#define VOU_LOCAL_CLKEN		(topcrm_base + 0x68)
+#define VOU_LOCAL_CLKSEL	(topcrm_base + 0x70)
+#define VOU_LOCAL_DIV2_SET	(topcrm_base + 0x74)
+#define CLK_MUX1		(topcrm_base + 0x8c)
+
+#define CLK_SDMMC1		(lsp0crpm_base + 0x0c)
+
+#define CLK_UART0		(lsp1crpm_base + 0x20)
+#define CLK_UART1		(lsp1crpm_base + 0x24)
+#define CLK_SDMMC0		(lsp1crpm_base + 0x2c)
+
+static const struct zx_pll_config pll_a9_config[] = {
+	{ .rate = 700000000, .cfg0 = 0x800405d1, .cfg1 = 0x04555555 },
+	{ .rate = 800000000, .cfg0 = 0x80040691, .cfg1 = 0x04aaaaaa },
+	{ .rate = 900000000, .cfg0 = 0x80040791, .cfg1 = 0x04000000 },
+	{ .rate = 1000000000, .cfg0 = 0x80040851, .cfg1 = 0x04555555 },
+	{ .rate = 1100000000, .cfg0 = 0x80040911, .cfg1 = 0x04aaaaaa },
+	{ .rate = 1200000000, .cfg0 = 0x80040a11, .cfg1 = 0x04000000 },
+};
+
+static const struct clk_div_table main_hlk_div[] = {
+	{ .val = 1, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ /* sentinel */ }
+};
+
+static const struct clk_div_table a9_as1_aclk_divider[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ /* sentinel */ }
+};
+
+static const struct clk_div_table sec_wclk_divider[] = {
+	{ .val = 0, .div = 1, },
+	{ .val = 1, .div = 2, },
+	{ .val = 3, .div = 4, },
+	{ .val = 5, .div = 6, },
+	{ .val = 7, .div = 8, },
+	{ /* sentinel */ }
+};
+
+static const char * matrix_aclk_sel[] = {
+	"pll_mm0_198M",
+	"osc",
+	"clk_148M5",
+	"pll_lsp_104M",
+};
+
+static const char * a9_wclk_sel[] = {
+	"pll_a9",
+	"osc",
+	"clk_500",
+	"clk_250",
+};
+
+static const char * a9_as1_aclk_sel[] = {
+	"clk_250",
+	"osc",
+	"pll_mm0_396M",
+	"pll_mac_333M",
+};
+
+static const char * a9_trace_clkin_sel[] = {
+	"clk_74M25",
+	"pll_mm1_108M",
+	"clk_125",
+	"clk_148M5",
+};
+
+static const char * decppu_aclk_sel[] = {
+	"clk_250",
+	"pll_mm0_198M",
+	"pll_lsp_104M",
+	"pll_audio_294M912",
+};
+
+static const char * vou_main_wclk_sel[] = {
+	"clk_148M5",
+	"clk_74M25",
+	"clk_27",
+	"pll_mm1_54M",
+};
+
+static const char * vou_scaler_wclk_sel[] = {
+	"clk_250",
+	"pll_mac_333M",
+	"pll_audio_294M912",
+	"pll_mm0_198M",
+};
+
+static const char * r2d_wclk_sel[] = {
+	"pll_audio_294M912",
+	"pll_mac_333M",
+	"pll_a9_350M",
+	"pll_mm0_396M",
+};
+
+static const char * ddr_wclk_sel[] = {
+	"pll_mac_333M",
+	"pll_ddr_266M",
+	"pll_audio_294M912",
+	"pll_mm0_198M",
+};
+
+static const char * nand_wclk_sel[] = {
+	"pll_lsp_104M",
+	"osc",
+};
+
+static const char * lsp_26_wclk_sel[] = {
+	"pll_lsp_26M",
+	"osc",
+};
+
+static const char * vl0_sel[] = {
+	"vou_main_channel_div",
+	"vou_aux_channel_div",
+};
+
+static const char * hdmi_sel[] = {
+	"vou_main_channel_wclk",
+	"vou_aux_channel_wclk",
+};
+
+static const char * sdmmc0_wclk_sel[] = {
+	"lsp1_104M_wclk",
+	"lsp1_26M_wclk",
+};
+
+static const char * sdmmc1_wclk_sel[] = {
+	"lsp0_104M_wclk",
+	"lsp0_26M_wclk",
+};
+
+static const char * uart_wclk_sel[] = {
+	"lsp1_104M_wclk",
+	"lsp1_26M_wclk",
+};
+
+static inline struct clk *zx_divtbl(const char *name, const char *parent,
+				    void __iomem *reg, u8 shift, u8 width,
+				    const struct clk_div_table *table)
+{
+	return clk_register_divider_table(NULL, name, parent, 0, reg, shift,
+					  width, 0, table, &reg_lock);
+}
+
+static inline struct clk *zx_div(const char *name, const char *parent,
+				 void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_register_divider(NULL, name, parent, 0,
+				    reg, shift, width, 0, &reg_lock);
+}
+
+static inline struct clk *zx_mux(const char *name, const char **parents,
+		int num_parents, void __iomem *reg, u8 shift, u8 width)
+{
+	return clk_register_mux(NULL, name, parents, num_parents,
+				0, reg, shift, width, 0, &reg_lock);
+}
+
+static inline struct clk *zx_gate(const char *name, const char *parent,
+				  void __iomem *reg, u8 shift)
+{
+	return clk_register_gate(NULL, name, parent, CLK_IGNORE_UNUSED,
+				 reg, shift, 0, &reg_lock);
+}
+
+static void __init zx296702_top_clocks_init(struct device_node *np)
+{
+	struct clk **clk = topclk;
+	int i;
+
+	topcrm_base = of_iomap(np, 0);
+	WARN_ON(!topcrm_base);
+
+	clk[ZX296702_OSC] =
+		clk_register_fixed_rate(NULL, "osc", NULL, CLK_IS_ROOT,
+				30000000);
+	clk[ZX296702_PLL_A9] =
+		clk_register_zx_pll("pll_a9", "osc", 0, topcrm_base
+				+ 0x01c, pll_a9_config,
+				ARRAY_SIZE(pll_a9_config), &reg_lock);
+
+	/* TODO: pll_a9_350M look like changeble follow a9 pll */
+	clk[ZX296702_PLL_A9_350M] =
+		clk_register_fixed_rate(NULL, "pll_a9_350M", "osc", 0,
+				350000000);
+	clk[ZX296702_PLL_MAC_1000M] =
+		clk_register_fixed_rate(NULL, "pll_mac_1000M", "osc", 0,
+				1000000000);
+	clk[ZX296702_PLL_MAC_333M] =
+		clk_register_fixed_rate(NULL, "pll_mac_333M",	 "osc", 0,
+				333000000);
+	clk[ZX296702_PLL_MM0_1188M] =
+		clk_register_fixed_rate(NULL, "pll_mm0_1188M", "osc", 0,
+				1188000000);
+	clk[ZX296702_PLL_MM0_396M] =
+		clk_register_fixed_rate(NULL, "pll_mm0_396M",  "osc", 0,
+				396000000);
+	clk[ZX296702_PLL_MM0_198M] =
+		clk_register_fixed_rate(NULL, "pll_mm0_198M",  "osc", 0,
+				198000000);
+	clk[ZX296702_PLL_MM1_108M] =
+		clk_register_fixed_rate(NULL, "pll_mm1_108M",  "osc", 0,
+				108000000);
+	clk[ZX296702_PLL_MM1_72M] =
+		clk_register_fixed_rate(NULL, "pll_mm1_72M",	 "osc", 0,
+				72000000);
+	clk[ZX296702_PLL_MM1_54M] =
+		clk_register_fixed_rate(NULL, "pll_mm1_54M",	 "osc", 0,
+				54000000);
+	clk[ZX296702_PLL_LSP_104M] =
+		clk_register_fixed_rate(NULL, "pll_lsp_104M",  "osc", 0,
+				104000000);
+	clk[ZX296702_PLL_LSP_26M] =
+		clk_register_fixed_rate(NULL, "pll_lsp_26M",	 "osc", 0,
+				26000000);
+	clk[ZX296702_PLL_DDR_266M] =
+		clk_register_fixed_rate(NULL, "pll_ddr_266M",	 "osc", 0,
+				266000000);
+	clk[ZX296702_PLL_AUDIO_294M912] =
+		clk_register_fixed_rate(NULL, "pll_audio_294M912", "osc", 0,
+				294912000);
+
+	/* bus clock */
+	clk[ZX296702_MATRIX_ACLK] =
+		zx_mux("matrix_aclk", matrix_aclk_sel,
+				ARRAY_SIZE(matrix_aclk_sel), CLK_MUX, 2, 2);
+	clk[ZX296702_MAIN_HCLK] =
+		zx_divtbl("main_hclk", "matrix_aclk", CLK_DIV, 0, 2,
+				main_hlk_div);
+	clk[ZX296702_MAIN_PCLK] =
+		zx_divtbl("main_pclk", "matrix_aclk", CLK_DIV, 2, 2,
+				main_hlk_div);
+
+	/* cpu clock */
+	clk[ZX296702_CLK_500] =
+		clk_register_fixed_factor(NULL, "clk_500", "pll_mac_1000M", 0,
+				1, 2);
+	clk[ZX296702_CLK_250] =
+		clk_register_fixed_factor(NULL, "clk_250", "pll_mac_1000M", 0,
+				1, 4);
+	clk[ZX296702_CLK_125] =
+		clk_register_fixed_factor(NULL, "clk_125", "clk_250", 0, 1, 2);
+	clk[ZX296702_CLK_148M5] =
+		clk_register_fixed_factor(NULL, "clk_148M5", "pll_mm0_1188M", 0,
+				1, 8);
+	clk[ZX296702_CLK_74M25] =
+		clk_register_fixed_factor(NULL, "clk_74M25", "pll_mm0_1188M", 0,
+				1, 16);
+	clk[ZX296702_A9_WCLK] =
+		zx_mux("a9_wclk", a9_wclk_sel, ARRAY_SIZE(a9_wclk_sel), CLK_MUX,
+				0, 2);
+	clk[ZX296702_A9_AS1_ACLK_MUX] =
+		zx_mux("a9_as1_aclk_mux", a9_as1_aclk_sel,
+				ARRAY_SIZE(a9_as1_aclk_sel), CLK_MUX, 4, 2);
+	clk[ZX296702_A9_TRACE_CLKIN_MUX] =
+		zx_mux("a9_trace_clkin_mux", a9_trace_clkin_sel,
+				ARRAY_SIZE(a9_trace_clkin_sel), CLK_MUX1, 0, 2);
+	clk[ZX296702_A9_AS1_ACLK_DIV] =
+		zx_divtbl("a9_as1_aclk_div", "a9_as1_aclk_mux", CLK_DIV, 4, 2,
+				a9_as1_aclk_divider);
+
+	/* multi-media clock */
+	clk[ZX296702_CLK_2] =
+		clk_register_fixed_factor(NULL, "clk_2", "pll_mm1_72M", 0,
+				1, 36);
+	clk[ZX296702_CLK_27] =
+		clk_register_fixed_factor(NULL, "clk_27", "pll_mm1_54M", 0,
+				1, 2);
+	clk[ZX296702_DECPPU_ACLK_MUX] =
+		zx_mux("decppu_aclk_mux", decppu_aclk_sel,
+				ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 6, 2);
+	clk[ZX296702_PPU_ACLK_MUX] =
+		zx_mux("ppu_aclk_mux", decppu_aclk_sel,
+				ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 8, 2);
+	clk[ZX296702_MALI400_ACLK_MUX] =
+		zx_mux("mali400_aclk_mux", decppu_aclk_sel,
+				ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 12, 2);
+	clk[ZX296702_VOU_ACLK_MUX] =
+		zx_mux("vou_aclk_mux", decppu_aclk_sel,
+				ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 10, 2);
+	clk[ZX296702_VOU_MAIN_WCLK_MUX] =
+		zx_mux("vou_main_wclk_mux", vou_main_wclk_sel,
+				ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 14, 2);
+	clk[ZX296702_VOU_AUX_WCLK_MUX] =
+		zx_mux("vou_aux_wclk_mux", vou_main_wclk_sel,
+				ARRAY_SIZE(vou_main_wclk_sel), CLK_MUX, 16, 2);
+	clk[ZX296702_VOU_SCALER_WCLK_MUX] =
+		zx_mux("vou_scaler_wclk_mux", vou_scaler_wclk_sel,
+				ARRAY_SIZE(vou_scaler_wclk_sel), CLK_MUX,
+				18, 2);
+	clk[ZX296702_R2D_ACLK_MUX] =
+		zx_mux("r2d_aclk_mux", decppu_aclk_sel,
+				ARRAY_SIZE(decppu_aclk_sel), CLK_MUX, 20, 2);
+	clk[ZX296702_R2D_WCLK_MUX] =
+		zx_mux("r2d_wclk_mux", r2d_wclk_sel,
+				ARRAY_SIZE(r2d_wclk_sel), CLK_MUX, 22, 2);
+
+	/* other clock */
+	clk[ZX296702_CLK_50] =
+		clk_register_fixed_factor(NULL, "clk_50", "pll_mac_1000M",
+				0, 1, 20);
+	clk[ZX296702_CLK_25] =
+		clk_register_fixed_factor(NULL, "clk_25", "pll_mac_1000M",
+				0, 1, 40);
+	clk[ZX296702_CLK_12] =
+		clk_register_fixed_factor(NULL, "clk_12", "pll_mm1_72M",
+				0, 1, 6);
+	clk[ZX296702_CLK_16M384] =
+		clk_register_fixed_factor(NULL, "clk_16M384",
+				"pll_audio_294M912", 0, 1, 18);
+	clk[ZX296702_CLK_32K768] =
+		clk_register_fixed_factor(NULL, "clk_32K768", "clk_16M384",
+				0, 1, 500);
+	clk[ZX296702_SEC_WCLK_DIV] =
+		zx_divtbl("sec_wclk_div", "pll_lsp_104M", CLK_DIV, 6, 3,
+				sec_wclk_divider);
+	clk[ZX296702_DDR_WCLK_MUX] =
+		zx_mux("ddr_wclk_mux", ddr_wclk_sel,
+				ARRAY_SIZE(ddr_wclk_sel), CLK_MUX, 24, 2);
+	clk[ZX296702_NAND_WCLK_MUX] =
+		zx_mux("nand_wclk_mux", nand_wclk_sel,
+				ARRAY_SIZE(nand_wclk_sel), CLK_MUX, 24, 2);
+	clk[ZX296702_LSP_26_WCLK_MUX] =
+		zx_mux("lsp_26_wclk_mux", lsp_26_wclk_sel,
+				ARRAY_SIZE(lsp_26_wclk_sel), CLK_MUX, 27, 1);
+
+	/* gates */
+	clk[ZX296702_A9_AS0_ACLK] =
+		zx_gate("a9_as0_aclk",	"matrix_aclk",		CLK_EN0, 0);
+	clk[ZX296702_A9_AS1_ACLK] =
+		zx_gate("a9_as1_aclk",	"a9_as1_aclk_div",	CLK_EN0, 1);
+	clk[ZX296702_A9_TRACE_CLKIN] =
+		zx_gate("a9_trace_clkin", "a9_trace_clkin_mux",	CLK_EN0, 2);
+	clk[ZX296702_DECPPU_AXI_M_ACLK] =
+		zx_gate("decppu_axi_m_aclk", "decppu_aclk_mux", CLK_EN0, 3);
+	clk[ZX296702_DECPPU_AHB_S_HCLK] =
+		zx_gate("decppu_ahb_s_hclk",	"main_hclk",	CLK_EN0, 4);
+	clk[ZX296702_PPU_AXI_M_ACLK] =
+		zx_gate("ppu_axi_m_aclk",	"ppu_aclk_mux",	CLK_EN0, 5);
+	clk[ZX296702_PPU_AHB_S_HCLK] =
+		zx_gate("ppu_ahb_s_hclk",	"main_hclk",	CLK_EN0, 6);
+	clk[ZX296702_VOU_AXI_M_ACLK] =
+		zx_gate("vou_axi_m_aclk",	"vou_aclk_mux",	CLK_EN0, 7);
+	clk[ZX296702_VOU_APB_PCLK] =
+		zx_gate("vou_apb_pclk",	"main_pclk",		CLK_EN0, 8);
+	clk[ZX296702_VOU_MAIN_CHANNEL_WCLK] =
+		zx_gate("vou_main_channel_wclk", "vou_main_wclk_mux",
+				CLK_EN0, 9);
+	clk[ZX296702_VOU_AUX_CHANNEL_WCLK] =
+		zx_gate("vou_aux_channel_wclk", "vou_aux_wclk_mux",
+				CLK_EN0, 10);
+	clk[ZX296702_VOU_HDMI_OSCLK_CEC] =
+		zx_gate("vou_hdmi_osclk_cec", "clk_2",		CLK_EN0, 11);
+	clk[ZX296702_VOU_SCALER_WCLK] =
+		zx_gate("vou_scaler_wclk", "vou_scaler_wclk_mux", CLK_EN0, 12);
+	clk[ZX296702_MALI400_AXI_M_ACLK] =
+		zx_gate("mali400_axi_m_aclk", "mali400_aclk_mux", CLK_EN0, 13);
+	clk[ZX296702_MALI400_APB_PCLK] =
+		zx_gate("mali400_apb_pclk",	"main_pclk",	CLK_EN0, 14);
+	clk[ZX296702_R2D_WCLK] =
+		zx_gate("r2d_wclk",		"r2d_wclk_mux",	CLK_EN0, 15);
+	clk[ZX296702_R2D_AXI_M_ACLK] =
+		zx_gate("r2d_axi_m_aclk",	"r2d_aclk_mux",	CLK_EN0, 16);
+	clk[ZX296702_R2D_AHB_HCLK] =
+		zx_gate("r2d_ahb_hclk",		"main_hclk",	CLK_EN0, 17);
+	clk[ZX296702_DDR3_AXI_S0_ACLK] =
+		zx_gate("ddr3_axi_s0_aclk",	"matrix_aclk",	CLK_EN0, 18);
+	clk[ZX296702_DDR3_APB_PCLK] =
+		zx_gate("ddr3_apb_pclk",	"main_pclk",	CLK_EN0, 19);
+	clk[ZX296702_DDR3_WCLK] =
+		zx_gate("ddr3_wclk",		"ddr_wclk_mux",	CLK_EN0, 20);
+	clk[ZX296702_USB20_0_AHB_HCLK] =
+		zx_gate("usb20_0_ahb_hclk",	"main_hclk",	CLK_EN0, 21);
+	clk[ZX296702_USB20_0_EXTREFCLK] =
+		zx_gate("usb20_0_extrefclk",	"clk_12",	CLK_EN0, 22);
+	clk[ZX296702_USB20_1_AHB_HCLK] =
+		zx_gate("usb20_1_ahb_hclk",	"main_hclk",	CLK_EN0, 23);
+	clk[ZX296702_USB20_1_EXTREFCLK] =
+		zx_gate("usb20_1_extrefclk",	"clk_12",	CLK_EN0, 24);
+	clk[ZX296702_USB20_2_AHB_HCLK] =
+		zx_gate("usb20_2_ahb_hclk",	"main_hclk",	CLK_EN0, 25);
+	clk[ZX296702_USB20_2_EXTREFCLK] =
+		zx_gate("usb20_2_extrefclk",	"clk_12",	CLK_EN0, 26);
+	clk[ZX296702_GMAC_AXI_M_ACLK] =
+		zx_gate("gmac_axi_m_aclk",	"matrix_aclk",	CLK_EN0, 27);
+	clk[ZX296702_GMAC_APB_PCLK] =
+		zx_gate("gmac_apb_pclk",	"main_pclk",	CLK_EN0, 28);
+	clk[ZX296702_GMAC_125_CLKIN] =
+		zx_gate("gmac_125_clkin",	"clk_125",	CLK_EN0, 29);
+	clk[ZX296702_GMAC_RMII_CLKIN] =
+		zx_gate("gmac_rmii_clkin",	"clk_50",	CLK_EN0, 30);
+	clk[ZX296702_GMAC_25M_CLK] =
+		zx_gate("gmac_25M_clk",		"clk_25",	CLK_EN0, 31);
+	clk[ZX296702_NANDFLASH_AHB_HCLK] =
+		zx_gate("nandflash_ahb_hclk", "main_hclk",	CLK_EN1, 0);
+	clk[ZX296702_NANDFLASH_WCLK] =
+		zx_gate("nandflash_wclk",     "nand_wclk_mux",	CLK_EN1, 1);
+	clk[ZX296702_LSP0_APB_PCLK] =
+		zx_gate("lsp0_apb_pclk",	"main_pclk",	CLK_EN1, 2);
+	clk[ZX296702_LSP0_AHB_HCLK] =
+		zx_gate("lsp0_ahb_hclk",	"main_hclk",	CLK_EN1, 3);
+	clk[ZX296702_LSP0_26M_WCLK] =
+		zx_gate("lsp0_26M_wclk",   "lsp_26_wclk_mux",	CLK_EN1, 4);
+	clk[ZX296702_LSP0_104M_WCLK] =
+		zx_gate("lsp0_104M_wclk",	"pll_lsp_104M",	CLK_EN1, 5);
+	clk[ZX296702_LSP0_16M384_WCLK] =
+		zx_gate("lsp0_16M384_wclk",	"clk_16M384",	CLK_EN1, 6);
+	clk[ZX296702_LSP1_APB_PCLK] =
+		zx_gate("lsp1_apb_pclk",	"main_pclk",	CLK_EN1, 7);
+	/* FIXME: wclk enable bit is bit8. We hack it as reserved 31 for
+	 * UART does not work after parent clk is disabled/enabled */
+	clk[ZX296702_LSP1_26M_WCLK] =
+		zx_gate("lsp1_26M_wclk",     "lsp_26_wclk_mux",	CLK_EN1, 31);
+	clk[ZX296702_LSP1_104M_WCLK] =
+		zx_gate("lsp1_104M_wclk",    "pll_lsp_104M",	CLK_EN1, 9);
+	clk[ZX296702_LSP1_32K_CLK] =
+		zx_gate("lsp1_32K_clk",	"clk_32K768",		CLK_EN1, 10);
+	clk[ZX296702_AON_HCLK] =
+		zx_gate("aon_hclk",		"main_hclk",	CLK_EN1, 11);
+	clk[ZX296702_SYS_CTRL_PCLK] =
+		zx_gate("sys_ctrl_pclk",	"main_pclk",	CLK_EN1, 12);
+	clk[ZX296702_DMA_PCLK] =
+		zx_gate("dma_pclk",		"main_pclk",	CLK_EN1, 13);
+	clk[ZX296702_DMA_ACLK] =
+		zx_gate("dma_aclk",		"matrix_aclk",	CLK_EN1, 14);
+	clk[ZX296702_SEC_HCLK] =
+		zx_gate("sec_hclk",		"main_hclk",	CLK_EN1, 15);
+	clk[ZX296702_AES_WCLK] =
+		zx_gate("aes_wclk",		"sec_wclk_div",	CLK_EN1, 16);
+	clk[ZX296702_DES_WCLK] =
+		zx_gate("des_wclk",		"sec_wclk_div",	CLK_EN1, 17);
+	clk[ZX296702_IRAM_ACLK] =
+		zx_gate("iram_aclk",		"matrix_aclk",	CLK_EN1, 18);
+	clk[ZX296702_IROM_ACLK] =
+		zx_gate("irom_aclk",		"matrix_aclk",	CLK_EN1, 19);
+	clk[ZX296702_BOOT_CTRL_HCLK] =
+		zx_gate("boot_ctrl_hclk",	"main_hclk",	CLK_EN1, 20);
+	clk[ZX296702_EFUSE_CLK_30] =
+		zx_gate("efuse_clk_30",	"osc",			CLK_EN1, 21);
+
+	/* TODO: add VOU Local clocks */
+	clk[ZX296702_VOU_MAIN_CHANNEL_DIV] =
+		zx_div("vou_main_channel_div", "vou_main_channel_wclk",
+				VOU_LOCAL_DIV2_SET, 1, 1);
+	clk[ZX296702_VOU_AUX_CHANNEL_DIV] =
+		zx_div("vou_aux_channel_div", "vou_aux_channel_wclk",
+				VOU_LOCAL_DIV2_SET, 0, 1);
+	clk[ZX296702_VOU_TV_ENC_HD_DIV] =
+		zx_div("vou_tv_enc_hd_div", "vou_tv_enc_hd_mux",
+				VOU_LOCAL_DIV2_SET, 3, 1);
+	clk[ZX296702_VOU_TV_ENC_SD_DIV] =
+		zx_div("vou_tv_enc_sd_div", "vou_tv_enc_sd_mux",
+				VOU_LOCAL_DIV2_SET, 2, 1);
+	clk[ZX296702_VL0_MUX] =
+		zx_mux("vl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 8, 1);
+	clk[ZX296702_VL1_MUX] =
+		zx_mux("vl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 9, 1);
+	clk[ZX296702_VL2_MUX] =
+		zx_mux("vl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 10, 1);
+	clk[ZX296702_GL0_MUX] =
+		zx_mux("gl0_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 5, 1);
+	clk[ZX296702_GL1_MUX] =
+		zx_mux("gl1_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 6, 1);
+	clk[ZX296702_GL2_MUX] =
+		zx_mux("gl2_mux", vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 7, 1);
+	clk[ZX296702_WB_MUX] =
+		zx_mux("wb_mux",  vl0_sel, ARRAY_SIZE(vl0_sel),
+				VOU_LOCAL_CLKSEL, 11, 1);
+	clk[ZX296702_HDMI_MUX] =
+		zx_mux("hdmi_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+				VOU_LOCAL_CLKSEL, 4, 1);
+	clk[ZX296702_VOU_TV_ENC_HD_MUX] =
+		zx_mux("vou_tv_enc_hd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+				VOU_LOCAL_CLKSEL, 3, 1);
+	clk[ZX296702_VOU_TV_ENC_SD_MUX] =
+		zx_mux("vou_tv_enc_sd_mux", hdmi_sel, ARRAY_SIZE(hdmi_sel),
+				VOU_LOCAL_CLKSEL, 2, 1);
+	clk[ZX296702_VL0_CLK] =
+		zx_gate("vl0_clk", "vl0_mux", VOU_LOCAL_CLKEN, 8);
+	clk[ZX296702_VL1_CLK] =
+		zx_gate("vl1_clk", "vl1_mux", VOU_LOCAL_CLKEN, 9);
+	clk[ZX296702_VL2_CLK] =
+		zx_gate("vl2_clk", "vl2_mux", VOU_LOCAL_CLKEN, 10);
+	clk[ZX296702_GL0_CLK] =
+		zx_gate("gl0_clk", "gl0_mux", VOU_LOCAL_CLKEN, 5);
+	clk[ZX296702_GL1_CLK] =
+		zx_gate("gl1_clk", "gl1_mux", VOU_LOCAL_CLKEN, 6);
+	clk[ZX296702_GL2_CLK] =
+		zx_gate("gl2_clk", "gl2_mux", VOU_LOCAL_CLKEN, 7);
+	clk[ZX296702_WB_CLK] =
+		zx_gate("wb_clk", "wb_mux", VOU_LOCAL_CLKEN, 11);
+	clk[ZX296702_CL_CLK] =
+		zx_gate("cl_clk", "vou_main_channel_div", VOU_LOCAL_CLKEN, 12);
+	clk[ZX296702_MAIN_MIX_CLK] =
+		zx_gate("main_mix_clk", "vou_main_channel_div",
+				VOU_LOCAL_CLKEN, 4);
+	clk[ZX296702_AUX_MIX_CLK] =
+		zx_gate("aux_mix_clk", "vou_aux_channel_div",
+				VOU_LOCAL_CLKEN, 3);
+	clk[ZX296702_HDMI_CLK] =
+		zx_gate("hdmi_clk", "hdmi_mux", VOU_LOCAL_CLKEN, 2);
+	clk[ZX296702_VOU_TV_ENC_HD_DAC_CLK] =
+		zx_gate("vou_tv_enc_hd_dac_clk", "vou_tv_enc_hd_div",
+				VOU_LOCAL_CLKEN, 1);
+	clk[ZX296702_VOU_TV_ENC_SD_DAC_CLK] =
+		zx_gate("vou_tv_enc_sd_dac_clk", "vou_tv_enc_sd_div",
+				VOU_LOCAL_CLKEN, 0);
+
+	/* CA9 PERIPHCLK = a9_wclk / 2 */
+	clk[ZX296702_A9_PERIPHCLK] =
+		clk_register_fixed_factor(NULL, "a9_periphclk", "a9_wclk",
+				0, 1, 2);
+
+	for (i = 0; i < ARRAY_SIZE(topclk); i++) {
+		if (IS_ERR(clk[i])) {
+			pr_err("zx296702 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+			return;
+		}
+	}
+
+	topclk_data.clks = topclk;
+	topclk_data.clk_num = ARRAY_SIZE(topclk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &topclk_data);
+}
+CLK_OF_DECLARE(zx296702_top_clk, "zte,zx296702-topcrm-clk",
+		zx296702_top_clocks_init);
+
+static void __init zx296702_lsp0_clocks_init(struct device_node *np)
+{
+	struct clk **clk = lsp0clk;
+	int i;
+
+	lsp0crpm_base = of_iomap(np, 0);
+	WARN_ON(!lsp0crpm_base);
+
+	/* SDMMC1 */
+	clk[ZX296702_SDMMC1_WCLK_MUX] =
+		zx_mux("sdmmc1_wclk_mux", sdmmc1_wclk_sel,
+				ARRAY_SIZE(sdmmc1_wclk_sel), CLK_SDMMC1, 4, 1);
+	clk[ZX296702_SDMMC1_WCLK_DIV] =
+		zx_div("sdmmc1_wclk_div", "sdmmc1_wclk_mux", CLK_SDMMC1, 12, 4);
+	clk[ZX296702_SDMMC1_WCLK] =
+		zx_gate("sdmmc1_wclk", "sdmmc1_wclk_div", CLK_SDMMC1, 1);
+	clk[ZX296702_SDMMC1_PCLK] =
+		zx_gate("sdmmc1_pclk", "lsp1_apb_pclk", CLK_SDMMC1, 0);
+
+	for (i = 0; i < ARRAY_SIZE(lsp0clk); i++) {
+		if (IS_ERR(clk[i])) {
+			pr_err("zx296702 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+			return;
+		}
+	}
+
+	lsp0clk_data.clks = lsp0clk;
+	lsp0clk_data.clk_num = ARRAY_SIZE(lsp0clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &lsp0clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp0_clk, "zte,zx296702-lsp0crpm-clk",
+		zx296702_lsp0_clocks_init);
+
+static void __init zx296702_lsp1_clocks_init(struct device_node *np)
+{
+	struct clk **clk = lsp1clk;
+	int i;
+
+	lsp1crpm_base = of_iomap(np, 0);
+	WARN_ON(!lsp1crpm_base);
+
+	/* UART0 */
+	clk[ZX296702_UART0_WCLK_MUX] =
+		zx_mux("uart0_wclk_mux", uart_wclk_sel,
+				ARRAY_SIZE(uart_wclk_sel), CLK_UART0, 4, 1);
+	/* FIXME: uart wclk enable bit is bit1 in. We hack it as reserved 31 for
+	 * UART does not work after parent clk is disabled/enabled */
+	clk[ZX296702_UART0_WCLK] =
+		zx_gate("uart0_wclk", "uart0_wclk_mux", CLK_UART0, 31);
+	clk[ZX296702_UART0_PCLK] =
+		zx_gate("uart0_pclk", "lsp1_apb_pclk", CLK_UART0, 0);
+
+	/* UART1 */
+	clk[ZX296702_UART1_WCLK_MUX] =
+		zx_mux("uart1_wclk_mux", uart_wclk_sel,
+				ARRAY_SIZE(uart_wclk_sel), CLK_UART1, 4, 1);
+	clk[ZX296702_UART1_WCLK] =
+		zx_gate("uart1_wclk", "uart1_wclk_mux", CLK_UART1, 1);
+	clk[ZX296702_UART1_PCLK] =
+		zx_gate("uart1_pclk", "lsp1_apb_pclk", CLK_UART1, 0);
+
+	/* SDMMC0 */
+	clk[ZX296702_SDMMC0_WCLK_MUX] =
+		zx_mux("sdmmc0_wclk_mux", sdmmc0_wclk_sel,
+				ARRAY_SIZE(sdmmc0_wclk_sel), CLK_SDMMC0, 4, 1);
+	clk[ZX296702_SDMMC0_WCLK_DIV] =
+		zx_div("sdmmc0_wclk_div", "sdmmc0_wclk_mux", CLK_SDMMC0, 12, 4);
+	clk[ZX296702_SDMMC0_WCLK] =
+		zx_gate("sdmmc0_wclk", "sdmmc0_wclk_div", CLK_SDMMC0, 1);
+	clk[ZX296702_SDMMC0_PCLK] =
+		zx_gate("sdmmc0_pclk", "lsp1_apb_pclk", CLK_SDMMC0, 0);
+
+	for (i = 0; i < ARRAY_SIZE(lsp1clk); i++) {
+		if (IS_ERR(clk[i])) {
+			pr_err("zx296702 clk %d: register failed with %ld\n",
+				i, PTR_ERR(clk[i]));
+			return;
+		}
+	}
+
+	lsp1clk_data.clks = lsp1clk;
+	lsp1clk_data.clk_num = ARRAY_SIZE(lsp1clk);
+	of_clk_add_provider(np, of_clk_src_onecell_get, &lsp1clk_data);
+}
+CLK_OF_DECLARE(zx296702_lsp1_clk, "zte,zx296702-lsp1crpm-clk",
+		zx296702_lsp1_clocks_init);
diff --git a/drivers/clk/zte/clk.h b/drivers/clk/zte/clk.h
new file mode 100644
index 0000000..0914a82
--- /dev/null
+++ b/drivers/clk/zte/clk.h
@@ -0,0 +1,32 @@
+/*
+ * Copyright 2015 Linaro Ltd.
+ * Copyright (C) 2014 ZTE Corporation.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef __ZTE_CLK_H
+#define __ZTE_CLK_H
+#include <linux/clk-provider.h>
+#include <linux/spinlock.h>
+
+struct zx_pll_config {
+	unsigned long rate;
+	u32 cfg0;
+	u32 cfg1;
+};
+
+struct clk_zx_pll {
+	struct clk_hw hw;
+	void __iomem *reg_base;
+	const struct zx_pll_config *lookup_table; /* order by rate asc */
+	int count;
+	spinlock_t *lock;
+};
+
+struct clk *clk_register_zx_pll(const char *name, const char *parent_name,
+	unsigned long flags, void __iomem *reg_base,
+	const struct zx_pll_config *lookup_table, int count, spinlock_t *lock);
+#endif
-- 
1.9.1

[PATCH v6 3/4] ARM: dts: zx: add an initial zx296702 dts and doc

[Jun Nie]

Add initial dts file and document for ZX296702 and board ZX296702-AD1.
More peripherals will be added later.

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 Documentation/devicetree/bindings/arm/zte.txt      |  15 +++
 .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++++++
 Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
 .../devicetree/bindings/vendor-prefixes.txt        |   1 +
 arch/arm/boot/dts/Makefile                         |   1 +
 arch/arm/boot/dts/zx296702-ad1.dts                 |  48 +++++++
 arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++++++++++++++++++
 7 files changed, 240 insertions(+), 1 deletion(-)
 create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
 create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
 create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
 create mode 100644 arch/arm/boot/dts/zx296702.dtsi

diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt
new file mode 100644
index 0000000..3ff5c9e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/zte.txt
@@ -0,0 +1,15 @@
+ZTE platforms device tree bindings
+---------------------------------------
+
+-  ZX296702 board:
+    Required root node properties:
+      - compatible = "zte,zx296702-ad1", "zte,zx296702"
+
+System management required properties:
+      - compatible = "zte,sysctrl"
+
+Low power management required properties:
+      - compatible = "zte,zx296702-pcu"
+
+Bus matrix required properties:
+      - compatible = "zte,zx-bus-matrix"
diff --git a/Documentation/devicetree/bindings/clock/zx296702-clk.txt b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
new file mode 100644
index 0000000..750442b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/zx296702-clk.txt
@@ -0,0 +1,35 @@
+Device Tree Clock bindings for ZTE zx296702
+
+This binding uses the common clock binding[1].
+
+[1] Documentation/devicetree/bindings/clock/clock-bindings.txt
+
+Required properties:
+- compatible : shall be one of the following:
+	"zte,zx296702-topcrm-clk":
+		zx296702 top clock selection, divider and gating
+
+	"zte,zx296702-lsp0crpm-clk" and
+	"zte,zx296702-lsp1crpm-clk":
+		zx296702 device level clock selection and gating
+
+- reg: Address and length of the register set
+
+The clock consumer should specify the desired clock by having the clock
+ID in its "clocks" phandle cell. See include/dt-bindings/clock/zx296702-clock.h
+for the full list of zx296702 clock IDs.
+
+
+topclk: topcrm at 0x09800000 {
+        compatible = "zte,zx296702-topcrm-clk";
+        reg = <0x09800000 0x1000>;
+        #clock-cells = <1>;
+};
+
+uart0: serial at 0x09405000 {
+        compatible = "zte,zx296702-uart";
+        reg = <0x09405000 0x1000>;
+        interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+        clocks = <&lsp1clk ZX296702_UART0_PCLK>;
+        status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/serial/pl011.txt b/Documentation/devicetree/bindings/serial/pl011.txt
index ba3ecb8..cbae3d9 100644
--- a/Documentation/devicetree/bindings/serial/pl011.txt
+++ b/Documentation/devicetree/bindings/serial/pl011.txt
@@ -1,7 +1,7 @@
 * ARM AMBA Primecell PL011 serial UART
 
 Required properties:
-- compatible: must be "arm,primecell", "arm,pl011"
+- compatible: must be "arm,primecell", "arm,pl011", "zte,zx296702-uart"
 - reg: exactly one register range with length 0x1000
 - interrupts: exactly one interrupt specifier
 
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 8033919..717ffd5 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -211,3 +211,4 @@ xillybus	Xillybus Ltd.
 xlnx	Xilinx
 zyxel	ZyXEL Communications Corp.
 zarlink	Zarlink Semiconductor
+zte	ZTE Corp.
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 86217db..4814c6b 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -660,6 +660,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
 	mt6592-evb.dtb \
 	mt8127-moose.dtb \
 	mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
 endif
 
 always		:= $(dtb-y)
diff --git a/arch/arm/boot/dts/zx296702-ad1.dts b/arch/arm/boot/dts/zx296702-ad1.dts
new file mode 100644
index 0000000..081f980
--- /dev/null
+++ b/arch/arm/boot/dts/zx296702-ad1.dts
@@ -0,0 +1,48 @@
+
+/dts-v1/;
+
+#include "zx296702.dtsi"
+
+/ {
+	model = "ZTE ZX296702 AD1 Board";
+	compatible = "zte,zx296702-ad1", "zte,zx296702";
+
+	aliases {
+		serial0 = &uart0;
+		serial1 = &uart1;
+	};
+
+	memory {
+		reg = <0x50000000 0x20000000>;
+	};
+};
+
+&mmc0 {
+	num-slots = <1>;
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot at 0 {
+		reg = <0>;
+		bus-width = <4>;
+	};
+};
+
+&mmc1 {
+	num-slots = <1>;
+	supports-highspeed;
+	non-removable;
+	disable-wp;
+	status = "okay";
+
+	slot at 0 {
+		reg = <0>;
+		bus-width = <8>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};
diff --git a/arch/arm/boot/dts/zx296702.dtsi b/arch/arm/boot/dts/zx296702.dtsi
new file mode 100644
index 0000000..d45c8fc
--- /dev/null
+++ b/arch/arm/boot/dts/zx296702.dtsi
@@ -0,0 +1,139 @@
+
+#include "skeleton.dtsi"
+#include <dt-bindings/clock/zx296702-clock.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		enable-method = "zte,zx296702-smp";
+
+		cpu at 0 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <0>;
+		};
+
+		cpu at 1 {
+			compatible = "arm,cortex-a9";
+			device_type = "cpu";
+			next-level-cache = <&l2cc>;
+			reg = <1>;
+		};
+	};
+
+
+	soc {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "simple-bus";
+		interrupt-parent = <&intc>;
+		ranges;
+
+		matrix: bus-matrix at 400000 {
+			compatible = "zte,zx-bus-matrix";
+			reg = <0x00400000 0x1000>;
+		};
+
+		intc: interrupt-controller at 00801000 {
+			compatible = "arm,cortex-a9-gic";
+			#interrupt-cells = <3>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			interrupt-controller;
+			reg = <0x00801000 0x1000>,
+			      <0x00800100 0x100>;
+		};
+
+		global_timer: timer at 008000200 {
+			compatible = "arm,cortex-a9-global-timer";
+			reg = <0x00800200 0x20>;
+			interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-parent = <&intc>;
+			clocks = <&topclk ZX296702_A9_PERIPHCLK>;
+		};
+
+		l2cc: l2-cache-controller at 0x00c00000 {
+			compatible = "arm,pl310-cache";
+			reg = <0x00c00000 0x1000>;
+			cache-unified;
+			cache-level = <2>;
+			arm,data-latency = <1 1 1>;
+			arm,tag-latency = <1 1 1>;
+			arm,double-linefill = <1>;
+			arm,double-linefill-incr = <0>;
+		};
+
+		pcu: pcu at 0xa0008000 {
+			compatible = "zte,zx296702-pcu";
+			reg = <0xa0008000 0x1000>;
+		};
+
+		topclk: topclk at 0x09800000 {
+			compatible = "zte,zx296702-topcrm-clk";
+			reg = <0x09800000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp1clk: lsp1clk at 0x09400000 {
+			compatible = "zte,zx296702-lsp1crpm-clk";
+			reg = <0x09400000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		lsp0clk: lsp0clk at 0x0b000000 {
+			compatible = "zte,zx296702-lsp0crpm-clk";
+			reg = <0x0b000000 0x1000>;
+			#clock-cells = <1>;
+		};
+
+		uart0: serial at 0x09405000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09405000 0x1000>;
+			interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART0_WCLK>;
+			status = "disabled";
+		};
+
+		uart1: serial at 0x09406000 {
+			compatible = "zte,zx296702-uart";
+			reg = <0x09406000 0x1000>;
+			interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&lsp1clk ZX296702_UART1_WCLK>;
+			status = "disabled";
+		};
+
+		mmc0: mmc at 0x09408000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x09408000 0x1000>;
+			interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp1clk ZX296702_SDMMC0_PCLK>,
+				 <&lsp1clk ZX296702_SDMMC0_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		mmc1: mmc at 0x0b003000 {
+			compatible = "snps,dw-mshc";
+			#address-cells = <1>;
+			#size-cells = <0>;
+			reg = <0x0b003000 0x1000>;
+			interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+			fifo-depth = <32>;
+			clocks = <&lsp0clk ZX296702_SDMMC1_PCLK>,
+				 <&lsp0clk ZX296702_SDMMC1_WCLK>;
+			clock-names = "biu", "ciu";
+			status = "disabled";
+		};
+
+		sysctrl: sysctrl at 0xa0007000 {
+			compatible = "zte,sysctrl", "syscon";
+			reg = <0xa0007000 0x1000>;
+		};
+	};
+};
-- 
1.9.1

[PATCH v6 4/4] ARM: zx: Add basic defconfig support for ZX296702

[Jun Nie]

Add basic defconfig support to zx SOC, including uart, mmc
 and other common config

Signed-off-by: Jun Nie <jun.nie@linaro.org>
---
 arch/arm/configs/zx_defconfig | 129 ++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 129 insertions(+)
 create mode 100644 arch/arm/configs/zx_defconfig

diff --git a/arch/arm/configs/zx_defconfig b/arch/arm/configs/zx_defconfig
new file mode 100644
index 0000000..b200bb0
--- /dev/null
+++ b/arch/arm/configs/zx_defconfig
@@ -0,0 +1,129 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_NAMESPACES=y
+CONFIG_USER_NS=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_PERF_EVENTS=y
+CONFIG_SLAB=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_ZX=y
+CONFIG_SOC_ZX296702=y
+# CONFIG_SWP_EMULATE is not set
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_SMP=y
+CONFIG_VMSPLIT_2G=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_KSM=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HIBERNATION=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_SUSPEND_TIME=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="console=ttyAMA0,115200 debug earlyprintk root=/dev/ram rw rootwait"
+#CONFIG_NET is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=192
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_UID_STAT=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_DM=y
+CONFIG_DM_CRYPT=y
+CONFIG_DM_UEVENT=y
+CONFIG_DM_VERITY=y
+CONFIG_NETDEVICES=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_SERIO=y
+CONFIG_SERIO_LIBPS2=y
+CONFIG_SPI=y
+CONFIG_LOGO=y
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_CONSOLE_POLL=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_OF_PLATFORM=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_DW=y
+CONFIG_MMC_DW_IDMAC=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_EXT4_DEBUG=y
+CONFIG_FUSE_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=936
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+#CONFIG_NFS_FS is not set
+CONFIG_NLS_CODEPAGE_936=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_INFO=y
+CONFIG_FRAME_WARN=4096
+CONFIG_DEBUG_FS=y
+CONFIG_DEBUG_MEMORY_INIT=y
+CONFIG_PANIC_TIMEOUT=5
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_MUTEXES=y
+CONFIG_RCU_CPU_STALL_TIMEOUT=60
+# CONFIG_FTRACE is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_KDB=y
+# CONFIG_ARM_UNWIND is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y
+CONFIG_DYNAMIC_DEBUG=y
+CONFIG_STACKTRACE=y
+CONFIG_DEBUG_ZTE_ZX=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_LZO=y
+CONFIG_GPIOLIB=y
-- 
1.9.1

[PATCH v6 2/4] clk: zx: add clock support to zx296702

[Stephen Boyd]

On 06/04, Jun Nie wrote:
> It adds a clock driver for zx296702 SoC to register the clock tree to
> Common Clock Framework.  All the clocks of bus topology and some the
> peripheral clocks are ready with this commit. Some missing leaf clocks
> for peripherals will be added later when needed.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> ---

Reviewed-by: Stephen Boyd <sboyd@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Stephen Boyd]

On 06/04, Jun Nie wrote:
> Changes vs v5:
>   - Remove redundant code and polish return value in clock driver.
> 
> Changes vs v4:
>   - Fix issues in clock driver that Stephen found.
>   - Remove initramfs in defconfig to avoid overriding test config.
>   - Drop patches that already merged into ARM next/soc.
> 
> Jun Nie (4):
>   dt-bindings: Add #defines for ZTE ZX296702 clocks
>   clk: zx: add clock support to zx296702
>   ARM: dts: zx: add an initial zx296702 dts and doc
>   ARM: zx: Add basic defconfig support for ZX296702

clk patch looks ok. If this doesn't go into 4.2 please consider
sending the clk driver through the clk tree.

> 
>  Documentation/devicetree/bindings/arm/zte.txt      |  15 +
>  .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++
>  Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>  arch/arm/boot/dts/Makefile                         |   1 +
>  arch/arm/boot/dts/zx296702-ad1.dts                 |  48 ++
>  arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++
>  arch/arm/configs/zx_defconfig                      | 129 ++++
>  drivers/clk/Makefile                               |   1 +
>  drivers/clk/zte/Makefile                           |   2 +
>  drivers/clk/zte/clk-pll.c                          | 172 ++++++
>  drivers/clk/zte/clk-zx296702.c                     | 657 +++++++++++++++++++++
>  drivers/clk/zte/clk.h                              |  32 +
>  include/dt-bindings/clock/zx296702-clock.h         | 170 ++++++
>  14 files changed, 1403 insertions(+), 1 deletion(-)
>  create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
>  create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
>  create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
>  create mode 100644 arch/arm/boot/dts/zx296702.dtsi
>  create mode 100644 arch/arm/configs/zx_defconfig
>  create mode 100644 drivers/clk/zte/Makefile
>  create mode 100644 drivers/clk/zte/clk-pll.c
>  create mode 100644 drivers/clk/zte/clk-zx296702.c
>  create mode 100644 drivers/clk/zte/clk.h
>  create mode 100644 include/dt-bindings/clock/zx296702-clock.h
> 
> -- 
> 1.9.1
> 

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Jun Nie]

2015-06-05 2:27 GMT+08:00 Stephen Boyd <sboyd@codeaurora.org>:
> On 06/04, Jun Nie wrote:
>> Changes vs v5:
>>   - Remove redundant code and polish return value in clock driver.
>>
>> Changes vs v4:
>>   - Fix issues in clock driver that Stephen found.
>>   - Remove initramfs in defconfig to avoid overriding test config.
>>   - Drop patches that already merged into ARM next/soc.
>>
>> Jun Nie (4):
>>   dt-bindings: Add #defines for ZTE ZX296702 clocks
>>   clk: zx: add clock support to zx296702
>>   ARM: dts: zx: add an initial zx296702 dts and doc
>>   ARM: zx: Add basic defconfig support for ZX296702
>
> clk patch looks ok. If this doesn't go into 4.2 please consider
> sending the clk driver through the clk tree.

That's OK. Do you mean I need to send clk patches to clk mail list, or
you can just take it into your branch? I will wait for they are
merged, then post other ARM patches again because ARM patches depends
on clk header file.

>
>>
>>  Documentation/devicetree/bindings/arm/zte.txt      |  15 +
>>  .../devicetree/bindings/clock/zx296702-clk.txt     |  35 ++
>>  Documentation/devicetree/bindings/serial/pl011.txt |   2 +-
>>  .../devicetree/bindings/vendor-prefixes.txt        |   1 +
>>  arch/arm/boot/dts/Makefile                         |   1 +
>>  arch/arm/boot/dts/zx296702-ad1.dts                 |  48 ++
>>  arch/arm/boot/dts/zx296702.dtsi                    | 139 +++++
>>  arch/arm/configs/zx_defconfig                      | 129 ++++
>>  drivers/clk/Makefile                               |   1 +
>>  drivers/clk/zte/Makefile                           |   2 +
>>  drivers/clk/zte/clk-pll.c                          | 172 ++++++
>>  drivers/clk/zte/clk-zx296702.c                     | 657 +++++++++++++++++++++
>>  drivers/clk/zte/clk.h                              |  32 +
>>  include/dt-bindings/clock/zx296702-clock.h         | 170 ++++++
>>  14 files changed, 1403 insertions(+), 1 deletion(-)
>>  create mode 100644 Documentation/devicetree/bindings/arm/zte.txt
>>  create mode 100644 Documentation/devicetree/bindings/clock/zx296702-clk.txt
>>  create mode 100644 arch/arm/boot/dts/zx296702-ad1.dts
>>  create mode 100644 arch/arm/boot/dts/zx296702.dtsi
>>  create mode 100644 arch/arm/configs/zx_defconfig
>>  create mode 100644 drivers/clk/zte/Makefile
>>  create mode 100644 drivers/clk/zte/clk-pll.c
>>  create mode 100644 drivers/clk/zte/clk-zx296702.c
>>  create mode 100644 drivers/clk/zte/clk.h
>>  create mode 100644 include/dt-bindings/clock/zx296702-clock.h
>>
>> --
>> 1.9.1
>>
>
> --
> Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
> a Linux Foundation Collaborative Project

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Shawn Guo]

Hi Stephen,

On Thu, Jun 04, 2015 at 11:27:39AM -0700, Stephen Boyd wrote:
> On 06/04, Jun Nie wrote:
> > Changes vs v5:
> >   - Remove redundant code and polish return value in clock driver.
> > 
> > Changes vs v4:
> >   - Fix issues in clock driver that Stephen found.
> >   - Remove initramfs in defconfig to avoid overriding test config.
> >   - Drop patches that already merged into ARM next/soc.
> > 
> > Jun Nie (4):
> >   dt-bindings: Add #defines for ZTE ZX296702 clocks
> >   clk: zx: add clock support to zx296702
> >   ARM: dts: zx: add an initial zx296702 dts and doc
> >   ARM: zx: Add basic defconfig support for ZX296702
> 
> clk patch looks ok. If this doesn't go into 4.2 please consider
> sending the clk driver through the clk tree.

Can you please either take the clk part through your tree for 4.2, or
give the permission that we send everything through arm-soc tree for
4.2?  Otherwise, it will take such a long time to get the series merged,
i.e. you will take clk part for 4.3 and the dts part which depends on
clk part can only possibly land on mainline at 4.4, if I understand your
comment correctly.

Shawn

[PATCH v6 2/4] clk: zx: add clock support to zx296702

[Arnd Bergmann]

On Thursday 04 June 2015 11:21:01 Jun Nie wrote:
> It adds a clock driver for zx296702 SoC to register the clock tree to
> Common Clock Framework.  All the clocks of bus topology and some the
> peripheral clocks are ready with this commit. Some missing leaf clocks
> for peripherals will be added later when needed.
> 
> Signed-off-by: Jun Nie <jun.nie@linaro.org>
> 

I'll wait for Ack from the drivers/clk maintainers before applying this.

	Arnd

[PATCH v6 2/4] clk: zx: add clock support to zx296702

[Stephen Boyd]

On 06/05, Arnd Bergmann wrote:
> On Thursday 04 June 2015 11:21:01 Jun Nie wrote:
> > It adds a clock driver for zx296702 SoC to register the clock tree to
> > Common Clock Framework.  All the clocks of bus topology and some the
> > peripheral clocks are ready with this commit. Some missing leaf clocks
> > for peripherals will be added later when needed.
> > 
> > Signed-off-by: Jun Nie <jun.nie@linaro.org>
> > 
> 
> I'll wait for Ack from the drivers/clk maintainers before applying this.
> 

Sent already as <20150604182526.GG490@codeaurora.org>

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Stephen Boyd]

On 06/05, Shawn Guo wrote:
> Hi Stephen,
> 
> On Thu, Jun 04, 2015 at 11:27:39AM -0700, Stephen Boyd wrote:
> > On 06/04, Jun Nie wrote:
> > > Changes vs v5:
> > >   - Remove redundant code and polish return value in clock driver.
> > > 
> > > Changes vs v4:
> > >   - Fix issues in clock driver that Stephen found.
> > >   - Remove initramfs in defconfig to avoid overriding test config.
> > >   - Drop patches that already merged into ARM next/soc.
> > > 
> > > Jun Nie (4):
> > >   dt-bindings: Add #defines for ZTE ZX296702 clocks
> > >   clk: zx: add clock support to zx296702
> > >   ARM: dts: zx: add an initial zx296702 dts and doc
> > >   ARM: zx: Add basic defconfig support for ZX296702
> > 
> > clk patch looks ok. If this doesn't go into 4.2 please consider
> > sending the clk driver through the clk tree.
> 
> Can you please either take the clk part through your tree for 4.2, or
> give the permission that we send everything through arm-soc tree for
> 4.2?  Otherwise, it will take such a long time to get the series merged,
> i.e. you will take clk part for 4.3 and the dts part which depends on
> clk part can only possibly land on mainline at 4.4, if I understand your
> comment correctly.

I was saying that if this isn't going to be accepted into arm-soc
because it's too close to the next merge window, then we can take
it through the clk tree next time. Looks like Arnd is ready to
take it though and I've already given Reviewed-by so it should be
good to go through arm-soc.

-- 
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Shawn Guo]

On Fri, Jun 05, 2015 at 12:07:44PM -0700, Stephen Boyd wrote:
> I was saying that if this isn't going to be accepted into arm-soc
> because it's too close to the next merge window, then we can take
> it through the clk tree next time. Looks like Arnd is ready to
> take it though and I've already given Reviewed-by so it should be
> good to go through arm-soc.

Thanks for clarification, Stephen.

Shawn

[PATCH v6 0/4] Add basic ZTE zx296702 SOC support

[Kevin Hilman]

Shawn Guo <shawnguo@kernel.org> writes:

> On Fri, Jun 05, 2015 at 12:07:44PM -0700, Stephen Boyd wrote:
>> I was saying that if this isn't going to be accepted into arm-soc
>> because it's too close to the next merge window, then we can take
>> it through the clk tree next time. Looks like Arnd is ready to
>> take it though and I've already given Reviewed-by so it should be
>> good to go through arm-soc.
>
> Thanks for clarification, Stephen.

This is now applied to the zte/soc branch of arm-soc tree, with
Stephen's Reviewed-by, and merged into next/soc for v4.2.

Thanks,

Kevin