[PATCH 0/3] Pinctrl support for msm8660

[PATCH 0/3] Pinctrl support for msm8660

[Bjorn Andersson]

Per your request Linus, happy birthday!

Regards,
Bjorn

Bjorn Andersson (3):
  pinctrl: qcom: Add MSM8660 pinctrl definitions
  pinctrl: dt-binding: Add DT binding documentation for MSM8660
  ARM: dts: qcom: Replace gpio node with pinctrl node

 .../bindings/pinctrl/qcom,msm8660-pinctrl.txt      |  90 ++
 arch/arm/boot/dts/qcom-msm8660.dtsi                |  11 +-
 drivers/pinctrl/qcom/Kconfig                       |   8 +
 drivers/pinctrl/qcom/Makefile                      |   1 +
 drivers/pinctrl/qcom/pinctrl-msm8660.c             | 984 +++++++++++++++++++++
 5 files changed, 1089 insertions(+), 5 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,msm8660-pinctrl.txt
 create mode 100644 drivers/pinctrl/qcom/pinctrl-msm8660.c

-- 
1.8.2.2

[PATCH 3/3] ARM: dts: qcom: Replace gpio node with pinctrl node

[Bjorn Andersson]

Replace the standalone gpio driver with pinctrl-msm as we now have
msm8660 support there.

Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
---
 arch/arm/boot/dts/qcom-msm8660.dtsi | 11 ++++++-----
 1 file changed, 6 insertions(+), 5 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8660.dtsi b/arch/arm/boot/dts/qcom-msm8660.dtsi
index 20bbd19b996e..28bba8b09854 100644
--- a/arch/arm/boot/dts/qcom-msm8660.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8660.dtsi
@@ -62,15 +62,16 @@
 			cpu-offset = <0x40000>;
 		};
 
-		msmgpio: gpio at 800000 {
-			compatible = "qcom,msm-gpio";
-			reg = <0x00800000 0x4000>;
+		tlmm: pinctrl at 800000 {
+			compatible = "qcom,msm8660-pinctrl";
+			reg = <0x800000 0x4000>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpio = <173>;
 			interrupts = <0 16 0x4>;
 			interrupt-controller;
 			#interrupt-cells = <2>;
+
 		};
 
 		gcc: clock-controller at 900000 {
@@ -110,7 +111,7 @@
 
 			pmicintc: pmic at 0 {
 				compatible = "qcom,pm8058";
-				interrupt-parent = <&msmgpio>;
+				interrupt-parent = <&tlmm>;
 				interrupts = <88 8>;
 				#interrupt-cells = <2>;
 				interrupt-controller;
-- 
1.8.2.2

[PATCH 3/3] ARM: dts: qcom: Replace gpio node with pinctrl node

[Linus Walleij]

On Sat, Jun 6, 2015 at 12:52 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:

> Replace the standalone gpio driver with pinctrl-msm as we now have
> msm8660 support there.
>
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>

Acked-by: Linus Walleij <linus.walleij@linaro.org>

please funnel this through the ARM SoC tree.

Yours,
Linus Walleij

[PATCH 3/3] ARM: dts: qcom: Replace gpio node with pinctrl node

[Andy Gross]

On Fri, Jun 05, 2015 at 03:52:25PM -0700, Bjorn Andersson wrote:
> Replace the standalone gpio driver with pinctrl-msm as we now have
> msm8660 support there.
> 
> Signed-off-by: Bjorn Andersson <bjorn.andersson@sonymobile.com>
> ---

Applied, thanks!

-- 
Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
a Linux Foundation Collaborative Project

[PATCH 0/3] Pinctrl support for msm8660

[Linus Walleij]

On Sat, Jun 6, 2015 at 12:52 AM, Bjorn Andersson
<bjorn.andersson@sonymobile.com> wrote:

> Per your request Linus, happy birthday!

Awwww opening this present 4 days late it still makes my day like
it was my birthday again!

Will boot my Dragon with these patches on, prompto!

Yours,
Linus Walleij