From: hdegoede@redhat.com (Hans de Goede)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 2/8] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs
Date: Tue, 9 Jun 2015 23:37:55 +0200 [thread overview]
Message-ID: <1433885881-19809-3-git-send-email-hdegoede@redhat.com> (raw)
In-Reply-To: <1433885881-19809-1-git-send-email-hdegoede@redhat.com>
Add a cell for the usb power_supply part of the axp20x PMICs.
Note that this cell is only for the usb power_supply part and not the
ac-power / battery-charger / rtc-backup-bat-charger bits.
Depending on the board each of those must be enabled / disabled separately
in devicetree as most boards do not use all 4. So in dt each one needs its
own child-node of the axp20x node. Another reason for using separate child
nodes for each is so that other devicetree nodes can have a power-supply
property with a phandle referencing a node representing a single
power-supply.
The decision to use a separate devicetree node for each is reflected on
the kernel side by each getting its own mfd-cell / platform_device and
platform-driver.
Cc: Bruno Pr?mont <bonbons@linux-vserver.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
drivers/mfd/axp20x.c | 32 +++++++++++++++++++++++++++++++-
1 file changed, 31 insertions(+), 1 deletion(-)
diff --git a/drivers/mfd/axp20x.c b/drivers/mfd/axp20x.c
index 6ffbc11..47ce233 100644
--- a/drivers/mfd/axp20x.c
+++ b/drivers/mfd/axp20x.c
@@ -113,6 +113,30 @@ static struct resource axp20x_pek_resources[] = {
},
};
+static struct resource axp20x_usb_power_supply_resources[] = {
+ {
+ .name = "VBUS_PLUGIN",
+ .start = AXP20X_IRQ_VBUS_PLUGIN,
+ .end = AXP20X_IRQ_VBUS_PLUGIN,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "VBUS_REMOVAL",
+ .start = AXP20X_IRQ_VBUS_REMOVAL,
+ .end = AXP20X_IRQ_VBUS_REMOVAL,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "VBUS_VALID",
+ .start = AXP20X_IRQ_VBUS_VALID,
+ .end = AXP20X_IRQ_VBUS_VALID,
+ .flags = IORESOURCE_IRQ,
+ }, {
+ .name = "VBUS_NOT_VALID",
+ .start = AXP20X_IRQ_VBUS_NOT_VALID,
+ .end = AXP20X_IRQ_VBUS_NOT_VALID,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
static struct resource axp22x_pek_resources[] = {
{
.name = "PEK_DBR",
@@ -165,7 +189,7 @@ static const struct regmap_config axp20x_regmap_config = {
.val_bits = 8,
.wr_table = &axp20x_writeable_table,
.volatile_table = &axp20x_volatile_table,
- .max_register = AXP20X_FG_RES,
+ .max_register = AXP20X_OCV(15),
.cache_type = REGCACHE_RBTREE,
};
@@ -368,6 +392,12 @@ static struct mfd_cell axp20x_cells[] = {
.resources = axp20x_pek_resources,
}, {
.name = "axp20x-regulator",
+ }, {
+ .name = "axp20x-usb-power-supply",
+ .of_compatible = "x-powers,axp202-usb-power-supply",
+ .num_resources =
+ ARRAY_SIZE(axp20x_usb_power_supply_resources),
+ .resources = axp20x_usb_power_supply_resources,
},
};
--
2.3.6
next prev parent reply other threads:[~2015-06-09 21:37 UTC|newest]
Thread overview: 31+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-06-09 21:37 [PATCH 0/8] mfd/power/phy: Add support for otg vbus detection via axp pmic Hans de Goede
2015-06-09 21:37 ` [PATCH 1/8] mfd: axp20x: Add missing registers, and mark more registers volatile Hans de Goede
2015-06-10 7:36 ` Lee Jones
2015-06-09 21:37 ` Hans de Goede [this message]
2015-06-10 1:19 ` [linux-sunxi] [PATCH 2/8] mfd: axp20x: Add a cell for the usb power_supply part of the axp20x PMICs Chen-Yu Tsai
2015-06-10 7:57 ` Hans de Goede
2015-06-13 13:50 ` Maxime Ripard
2015-06-24 12:18 ` Michal Suchanek
2015-06-10 7:35 ` Lee Jones
2015-06-10 7:36 ` Lee Jones
2015-06-09 21:37 ` [PATCH 3/8] power: Add devm_power_supply_get_by_phandle() helper function Hans de Goede
2015-06-10 14:49 ` Sebastian Reichel
2015-06-09 21:37 ` [PATCH 4/8] power: Add an axp20x-usb-power driver Hans de Goede
2015-06-10 7:29 ` Lee Jones
2015-06-10 9:22 ` Hans de Goede
2015-06-10 9:34 ` Lee Jones
2015-06-09 21:37 ` [PATCH 5/8] phy-sun4i-usb: Add support for monitoring vbus via a power-supply Hans de Goede
2015-06-09 21:37 ` [PATCH 6/8] ARM: dts: axp209: Add usb_power_supply child node to the ax209 node Hans de Goede
2015-07-31 5:31 ` [linux-sunxi] " Chen-Yu Tsai
2015-07-31 5:51 ` Bruno Prémont
2015-07-31 6:14 ` Chen-Yu Tsai
2015-07-31 6:35 ` Bruno Prémont
2015-07-31 7:57 ` Maxime Ripard
2015-07-31 8:31 ` Hans de Goede
2015-07-31 9:00 ` Chen-Yu Tsai
2015-07-31 9:11 ` Hans de Goede
2015-07-31 10:06 ` Chen-Yu Tsai
2015-07-31 9:14 ` Hans de Goede
2015-06-09 21:38 ` [PATCH 7/8] ARM: dts: sun7i: Add regulator configuration to the bananapi dts file Hans de Goede
2015-06-09 21:38 ` [PATCH 8/8] ARM: dts: sun7i: Enable USB DRC on Bananapi Hans de Goede
2015-06-10 6:15 ` [linux-sunxi] [PATCH 0/8] mfd/power/phy: Add support for otg vbus detection via axp pmic Priit Laes
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1433885881-19809-3-git-send-email-hdegoede@redhat.com \
--to=hdegoede@redhat.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).