[PATCH 1/3] ASoC: mediatek: Add AFE platform driver

Paul Bolle
2015-06-11T07:03:07Z

On Wed, 2015-06-10 at 22:24 +0800, Koro Chen wrote:
> --- /dev/null
> +++ b/sound/soc/mediatek/Kconfig

> +config SND_SOC_MEDIATEK
> + bool "ASoC support for Mediatek chip"
> + depends on ARCH_MEDIATEK
> + help
> + This adds ASoC platform driver support for Mediatek chip
> + that can be used with other codecs.
> + Select Y if you have such device.
> + Ex: MT8173

> --- /dev/null
> +++ b/sound/soc/mediatek/Makefile

> +obj-$(CONFIG_SND_SOC_MEDIATEK) += mtk-afe-pcm.o

> --- /dev/null
> +++ b/sound/soc/mediatek/mtk-afe-pcm.c

> +#include <linux/module.h>

> +static void mtk_afe_set_i2s_enable(struct mtk_afe *afe, bool enable)
> +{
> + unsigned int val;
> +
> + regmap_read(afe->regmap, AFE_I2S_CON2, &val);
> + if (!!(val & AFE_I2S_CON2_EN) == !!enable)

(What does negating a bool twice do?)

> + return; /* must skip soft reset */
> +
> + /* I2S soft reset begin */
> + regmap_update_bits(afe->regmap, AUDIO_TOP_CON1, 0x4, 0x4);
> +
> + /* input */
> + regmap_update_bits(afe->regmap, AFE_I2S_CON2, 0x1, !!enable);

Ditto.

> +
> + /* output */
> + regmap_update_bits(afe->regmap, AFE_I2S_CON1, 0x1, !!enable);

Ditto.

> +
> + /* I2S soft reset end */
> + udelay(1);
> + regmap_update_bits(afe->regmap, AUDIO_TOP_CON1, 0x4, 0);
> +}

> +static const struct of_device_id mtk_afe_pcm_dt_match[] = {
> + { .compatible = "mediatek,mt8173-afe-pcm", },
> + { }
> +};

> +static struct platform_driver mtk_afe_pcm_driver = {
> + .driver = {
> + .name = "mtk-afe-pcm",
> + .owner = THIS_MODULE,
> + .of_match_table = mtk_afe_pcm_dt_match,
> + .pm = &mtk_afe_pm_ops,
> + },
> + .probe = mtk_afe_pcm_dev_probe,
> + .remove = mtk_afe_pcm_dev_remove,
> +};

> +MODULE_DESCRIPTION("Mediatek ALSA SoC AFE platform driver");
> +MODULE_AUTHOR("Koro Chen <koro.chen@mediatek.com>");
> +MODULE_LICENSE("GPL v2");
> +MODULE_DEVICE_TABLE(of, mtk_afe_pcm_dt_match);

(The common pattern is to have MODULE_DEVICE_TABLE() directly follow
that table.)

SND_SOC_MEDIATEK is a bool symbol and mtk-afe-pcm.o is built-in only.
But the code uses a few module specific constructs. I spotted
THIS_MODULE, MODULE_DESCRIPTION, MODULE_AUTHOR, MODULE_LICENSE, and
MODULE_DEVICE_TABLE.

Is SND_SOC_MEDIATEK perhaps meant to be bool?

Likewise for SND_SOC_MT8173_MAX98090 (in 2/3) and
SND_SOC_MT8173_RT5650_RT5676 (in 3/3).

Thanks,

Paul Bolle