From mboxrd@z Thu Jan 1 00:00:00 1970 From: sboyd@codeaurora.org (Stephen Boyd) Date: Fri, 12 Jun 2015 15:48:06 -0700 Subject: [PATCH] regulator: Add docbook for soft start Message-ID: <1434149286-11969-1-git-send-email-sboyd@codeaurora.org> To: linux-arm-kernel@lists.infradead.org List-Id: linux-arm-kernel.lists.infradead.org The docbook for these members is missing. Add them. Warning(include/linux/regulator/machine.h:147): No description found for parameter 'soft_start' Warning(include/linux/regulator/driver.h:197): No description found for parameter 'set_soft_start' Reported-by: kbuild test robot Signed-off-by: Stephen Boyd --- include/linux/regulator/driver.h | 1 + include/linux/regulator/machine.h | 1 + 2 files changed, 2 insertions(+) diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 125264f8be93..4db9fbe4889d 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -112,6 +112,7 @@ struct regulator_linear_range { * to stabilise after being set to a new value, in microseconds. * The function provides the from and to voltage selector, the * function should return the worst case. + * @set_soft_start: Enable soft start for the regulator. * * @set_suspend_voltage: Set the voltage for the regulator when the system * is suspended. diff --git a/include/linux/regulator/machine.h b/include/linux/regulator/machine.h index 85a3b457de51..b11be1260129 100644 --- a/include/linux/regulator/machine.h +++ b/include/linux/regulator/machine.h @@ -88,6 +88,7 @@ struct regulator_state { * applied. * @apply_uV: Apply the voltage constraint when initialising. * @ramp_disable: Disable ramp delay when initialising or when setting voltage. + * @soft_start: Enable soft start so that voltage ramps slowly. * @pull_down: Enable pull down when regulator is disabled. * * @input_uV: Input voltage for regulator when supplied by another regulator. -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project